S. Suresh, Fatigue of materials, 1998.
DOI : 10.1017/CBO9780511806575

T. Anderson, Fracture mechanics, fundamental and application, Boca Raton (FL, 1991.

R. Mcclung, CRACK CLOSURE AND PLASTIC ZONE SIZES IN FATIGUE, Fatigue & Fracture of Engineering Materials and Structures, vol.982, issue.4, pp.455-68, 1991.
DOI : 10.1016/0022-5096(73)90024-0

Y. Lino, Local fatigue damage accumulation around notch attending crack initiation, Metall Mater Trans A, vol.26, pp.1419-1449, 1995.

D. Mcdowell and F. Dunne, Microstructure-sensitive computational modeling of fatigue crack formation, International Journal of Fatigue, vol.32, issue.9, pp.1521-1563, 2010.
DOI : 10.1016/j.ijfatigue.2010.01.003

J. Carroll, W. Abuzaid, J. Lambros, and H. Sehitoglu, On the interactions between strain accumulation, microstructure, and fatigue crack behavior, International Journal of Fracture, vol.24, issue.2, pp.223-264, 2013.
DOI : 10.1007/s10704-013-9813-8

S. Paul, S. Sivaprasad, S. Dhar, and S. Tarafder, Key issues in cyclic plastic deformation: Experimentation, Mechanics of Materials, vol.43, issue.11, pp.705-725, 2011.
DOI : 10.1016/j.mechmat.2011.07.011

S. Paul, S. Sivaprasad, S. Dhar, and S. Tarafder, Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction, Journal of Nuclear Materials, vol.401, issue.1-3, pp.17-24, 2011.
DOI : 10.1016/j.jnucmat.2010.03.014

G. Kang, Ratchetting: Recent progresses in phenomenon observation, constitutive modeling and application, International Journal of Fatigue, vol.30, issue.8, pp.1448-72, 2008.
DOI : 10.1016/j.ijfatigue.2007.10.002

A. Kapoor, A RE-EVALUATION OF THE LIFE TO RUPTURE OF DUCTILE METALS BY CYCLIC PLASTIC STRAIN, Fatigue & Fracture of Engineering Materials and Structures, vol.2, issue.4, pp.201-220, 1994.
DOI : 10.1016/0043-1648(86)90188-2

B. Pan, K. Qian, H. Xie, and A. Asundi, Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review, Measurement Science and Technology, vol.20, issue.6, p.20, 2009.
DOI : 10.1088/0957-0233/20/6/062001

B. Bay, Methods and applications of digital volume correlation, The Journal of Strain Analysis for Engineering Design, vol.43, issue.8, pp.745-60, 2008.
DOI : 10.1243/03093247JSA436

S. Roux, J. Réthoré, and F. Hild, Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks, Journal of Physics D: Applied Physics, vol.42, issue.21, p.42, 2009.
DOI : 10.1088/0022-3727/42/21/214004
URL : https://hal.archives-ouvertes.fr/hal-00381646

N. Limodin, J. Réthoré, J. Buffière, A. Gravouil, F. Hild et al., Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images, Acta Materialia, vol.57, issue.14, pp.4090-101, 2009.
DOI : 10.1016/j.actamat.2009.05.005
URL : https://hal.archives-ouvertes.fr/hal-00410325

A. Korsunsky, X. Song, J. Belnoue, T. Jun, F. Hofmann et al., Crack tip deformation fields and fatigue crack growth rates in Ti???6Al???4V???, International Journal of Fatigue, vol.31, issue.11-12, pp.1771-1780, 2009.
DOI : 10.1016/j.ijfatigue.2009.02.043

S. Vanlanduit, J. Vanherzeele, R. Longo, and P. Guillaume, A digital image correlation method for fatigue test experiments, Optics and Lasers in Engineering, vol.47, issue.3-4, pp.371-379, 2009.
DOI : 10.1016/j.optlaseng.2008.03.016

. Fig, The maximum normal strain evolution with the number of cycles (Seq 2), a comparison of the results from the SEM-DIC and the FE analysis

. Fig, The maximum normal strain evolution with the number of cycles (Seq 3), a comparison of the results from the SEM-DIC and the FE analysis

F. Mathieu, F. Hild, and S. Roux, Identification of a crack propagation law by digital image correlation, International Journal of Fatigue, vol.36, issue.1, pp.146-54, 2012.
DOI : 10.1016/j.ijfatigue.2011.08.004
URL : https://hal.archives-ouvertes.fr/hal-00694317

V. Doquet and S. Pommier, Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.289, issue.11, pp.1051-60, 2004.
DOI : 10.1046/j.1460-2695.2003.00622.x
URL : https://hal.archives-ouvertes.fr/hal-00111416

L. Zhao, J. Tong, and J. Byrne, The evolution of the stress-strain fields near a fatigue crack tip and plasticity-induced crack closure revisited, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.445, issue.1, pp.19-29, 2004.
DOI : 10.1016/0142-1123(89)90184-9

L. Zhao and J. Tong, A viscoplastic study of crack-tip deformation and crack growth in a nickel-based superalloy at elevated temperature, Journal of the Mechanics and Physics of Solids, vol.56, issue.12, pp.3363-78, 2008.
DOI : 10.1016/j.jmps.2008.09.006

C. Cornet, L. Zhao, and J. Tong, Ratchetting strain as a damage parameter in controlling crack growth at elevated temperature, Engineering Fracture Mechanics, vol.76, issue.16, pp.2538-53, 2009.
DOI : 10.1016/j.engfracmech.2009.09.005

J. Tong, L. Zhao, and B. Lin, Ratchetting strain as a driving force for fatigue crack growth, International Journal of Fatigue, vol.46, pp.49-57, 2013.
DOI : 10.1016/j.ijfatigue.2012.01.003

M. Huang, J. Tong, and Z. Li, A study of fatigue crack tip characteristics using discrete dislocation dynamics, International Journal of Plasticity, vol.54, pp.229-275, 2014.
DOI : 10.1016/j.ijplas.2013.08.016

S. Pommier and M. Risbet, Time derivative equations for mode I fatigue crack growth in metals, International Journal of Fatigue, vol.27, issue.10-12, pp.1297-306, 2005.
DOI : 10.1016/j.ijfatigue.2005.06.034
URL : https://hal.archives-ouvertes.fr/hal-00114052

J. Lemaitre and J. Chaboche, Mechanics of solid materials, 1990.

V. Doquet, D. Caldemaison, and T. Bretheau, Combined tension and torsion cyclic tests inside a scanning electron microscope, Proceedings of the 4th international conference on biaxial and multiaxial fatigue. Saint-Germain-en, pp.19-26, 1994.

L. Allais, M. Bornert, T. Bretheau, and D. Caldemaison, Experimental characterization of the local strain field in a heterogeneous elastoplastic material, Acta Metallurgica et Materialia, vol.42, issue.11, pp.3865-80, 1994.
DOI : 10.1016/0956-7151(94)90452-9

S. Paul, S. Sivaprasad, S. Dhar, M. Tarafder, and S. Tarafder, Simulation of cyclic plastic deformation response in SA333 C???Mn steel by a kinematic hardening model, Computational Materials Science, vol.48, issue.3, pp.662-71, 2010.
DOI : 10.1016/j.commatsci.2010.02.037

S. Paul and S. Tarafder, Cyclic plastic deformation response at fatigue crack tips, International Journal of Pressure Vessels and Piping, vol.101, pp.81-90, 2013.
DOI : 10.1016/j.ijpvp.2012.10.007

J. Chaboche, On some modifications of kinematic hardening to improve the description of ratchetting effects, International Journal of Plasticity, vol.7, issue.7, pp.661-78, 1991.
DOI : 10.1016/0749-6419(91)90050-9

P. Van-eeten and F. Nilsson, Constant and variable amplitude cyclic plasticity in 316L stainless steel, J Test Eval, vol.34, pp.298-311, 2006.

A. González-herrera and J. Zapatero, Influence of minimum element size to determine crack closure stress by the finite element method, Engineering Fracture Mechanics, vol.72, issue.3, pp.337-55, 2005.
DOI : 10.1016/j.engfracmech.2004.04.002

P. De-matos and D. Nowell, On the accurate assessment of crack opening and closing stresses in plasticity-induced fatigue crack closure problems, Engineering Fracture Mechanics, vol.74, issue.10, pp.1579-601, 2007.
DOI : 10.1016/j.engfracmech.2006.09.007

J. Newman-jr, A. Jr, and H. , Elastic-plastic analysis of a propagating crack under cyclic loading, 15th Structural Dynamics and Materials Conference, pp.1017-1040, 1975.
DOI : 10.2514/6.1974-366

K. Ohji, K. Ogura, and Y. Ohkubo, On the closure of fatigue cracks under cyclic tensile loading, International Journal of Fracture, vol.2, issue.305, pp.123-127, 1974.
DOI : 10.1007/BF00955089

K. Ogura and K. Ohji, FEM analysis of crack closure and delay effect in fatigue crack growth under variable amplitude loading, Eng Fract Mech, vol.9, pp.471-80, 1977.

M. Nakagaki and S. Atluri, FATIGUE CRACK CLOSURE AND DELAY EFFECTS UNDER MODE I SPECTRUM LOADING: AN EFFICIENT ELASTIC?PLASTIC ANALYSIS PROCEDURE, Fatigue & Fracture of Engineering Materials and Structures, vol.12, issue.4, pp.421-430, 1979.
DOI : 10.1016/0013-7944(77)90039-X

X. Yang, A viscoplastic model for 316L stainless steel under uniaxial cyclic straining and stressing at room temperature, Mechanics of Materials, vol.36, issue.11, pp.1073-86, 2004.
DOI : 10.1016/j.mechmat.2003.08.008

Y. Jiang and H. Sehitoglu, Modeling of Cyclic Ratchetting Plasticity, Part II: Comparison of Model Simulations With Experiments, Journal of Applied Mechanics, vol.63, issue.3, pp.726-759, 1996.
DOI : 10.1115/1.2823356

G. Kang, Y. Li, and Q. Gao, Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures: Experiments and simulations, Mechanics of Materials, vol.37, issue.11, pp.1101-1119, 2005.
DOI : 10.1016/j.mechmat.2005.01.006

L. Robert, F. Nazaret, T. Cutard, and J. Orteu, Use of 3-D Digital Image Correlation to Characterize the Mechanical Behavior of a Fiber Reinforced Refractory Castable, Experimental Mechanics, vol.74, issue.6, pp.761-73, 2007.
DOI : 10.1007/s11340-007-9062-8
URL : https://hal.archives-ouvertes.fr/hal-00840004

H. Padilla, J. Lambros, A. Beaudoin, and I. Robertson, Relating inhomogeneous deformation to local texture in zirconium through grain-scale digital image correlation strain mapping experiments, International Journal of Solids and Structures, vol.49, issue.1, pp.18-31, 2012.
DOI : 10.1016/j.ijsolstr.2011.09.001

J. Carroll, W. Abuzaid, J. Lambros, and H. Sehitoglu, High resolution digital image correlation measurements of strain accumulation in fatigue crack growth, International Journal of Fatigue, vol.57, pp.140-50, 2013.
DOI : 10.1016/j.ijfatigue.2012.06.010

D. Fonseca, J. Mummery, P. Withers, and P. , Full-field strain mapping by optical correlation of micrographs acquired during deformation, Journal of Microscopy, vol.34, issue.1, pp.9-21, 2005.
DOI : 10.1117/1.1387992

M. Bornert, F. Hild, J. Orteu, and S. Roux, Digital image correlation Full-field measurements and identification in solid mechanics, 2013.

W. Hu, C. Wang, and S. Barter, Analysis of cyclic mean stress relaxation and strain ratchetting behaviour of aluminium 7050 Aeronautical and maritime research lab, 1999.

J. Chaboche, Time-independent constitutive theories for cyclic plasticity, International Journal of Plasticity, vol.2, issue.2, pp.149-88, 1986.
DOI : 10.1016/0749-6419(86)90010-0

C. Wang and L. Rose, Transient and steady-state deformation at notch root under cyclic loading, Mechanics of Materials, vol.30, issue.3, pp.229-270, 1998.
DOI : 10.1016/S0167-6636(98)00048-9

J. Chaboche and D. Nouailhas, Constitutive Modeling of Ratchetting Effects???Part II: Possibilities of Some Additional Kinematic Rules, Journal of Engineering Materials and Technology, vol.111, issue.4, pp.409-425, 1989.
DOI : 10.1115/1.3226488