A certification method for the milling process of free-form surfaces using a test part

François Thiebaut (1) , C Lartigue (1) , E Duc (2, 3)

1 LURPA - Laboratoire Universitaire de Recherche en Production Automatisée
2 IFMA - Institut Français de Mécanique Avancée
3 IP - Institut Pascal

It is generally admitted that the manufacturing of free-form surfaces requires the use of a CAD-CAM system. The toolpath accuracy and the dimensional quality of the final shape have to be in accordance with the geometrical specifications. But most of the time, the final parts present deviations from the expected shape. These deviations may be due to either the toolpath calculation (CAM system) or the cutting process itself. In the paper, we propose an analysis of the whole milling process to point out the possible sources of errors. These errors generally lead to geometrical deviations and the final part does not meet the required specifications. As the errors can be linked to geometrical particularities of the shape, we propose a test part associated with check means to bring out problems. The milling of this part using two different techniques of toolpath generation shows that obviously both toolpaths are not error-free and that errors result from different geometrical particularities of the part surfaces.

Domaines: Génie mécanique [physics.class-ph]

François Thiebaut, C Lartigue, E Duc. A certification method for the milling process of free-form surfaces using a test part. International Journal of Production Research, 1999, ⟨10.1080/002075499191788⟩. ⟨hal-01226548⟩