Effect of Cr addition on solid state sintering of WC–Co alloys

V. Bounhoure (1) , S. Lay (1) , S. Coindeau (2) , S. Norgren , E. Pauty , J.M. Missiaen (1)

1 SIMaP - Science et Ingénierie des Matériaux et Procédés
2 CMTC - Consortium des Moyens Technologiques Communs

The effect of Cr addition and C content on densification and microstructural evolution of WC-Co alloys in the solid state was studied. Two alloys containing Cr and an excess of carbon or tungsten were investigated. They were compared with Cr free alloys. The intercept length distribution of the pore and binder phase was measured at several temperatures using image analysis. Cr addition delays the shrinkage whatever the C potential whilst better binder spreading and more effective rearrangement occur at lower temperature in the W rich alloy. When the temperature increases, the densification is accelerated in the C rich alloy. It is found that Cr addition has no significant effect on the solubility of W in the binder. The influence of Cr on the shrinkage behaviour is discussed putting emphasis on the grain boundary energies and on Cr oxides.

Domaines: Matériaux

V. Bounhoure, S. Lay, S. Coindeau, S. Norgren, E. Pauty, et al.. Effect of Cr addition on solid state sintering of WC–Co alloys. International Journal of Refractory Metals and Hard Materials, 2015, 52, pp.21-28. ⟨10.1016/j.ijrmhm.2015.05.002⟩. ⟨hal-01218310⟩