Modeling and control of a mixed-flow rice dryer with emphasis on breakage quality

Francis Courtois (1) , M. Abud-Archila (1) , Catherine Bonazzi (1) , J.M. Meot (1) , Gilles Trystram (2)

1 Ecole Nationale Supérieure des Industries Agricoles et Alimentaires
2 GENIAL - Ingénierie Procédés Aliments

The rice kernel is modelled as a two water compartment system and as a whole concerning heat and quality. The external transfers are governed by Fick and Fourier laws. The compartmental approach is mainly used to render the internal resistance in the most efficient way on the computer. Mass transfer coefficients were adjusted with the help of constant condition drying kinetics. A primary validation of the model was observed when compared to experimental kinetics with transient phenomena. A secondary validation was done at the thick layer level. A simple PI controller with system linearization was designed and rested on the simulator. The latest results concern the simulation of a large scale semi-industrial dryer for both steady and transient states. The controller was tested successfully on the simulator. Results have shown a robust behaviour for such a non-linear system. On the other hand, performance is highly dependant upon the dryer setpoint. Previous work on corn dryers has shown that improving this performance wasn't realistic for practical reasons (e.g. lack of knowledge about the zeros of the system). The resulting model, in its two (steady and transient state) versions, is available as a cross-platform software and also on internet. The validity range for the model is 15-80 Celsius, 0-100% HR and 0-1 mis.

Mots clés: drying; model; simulation; internet; rice; breakage quality

Domaines: Génie des procédés

Francis Courtois, M. Abud-Archila, Catherine Bonazzi, J.M. Meot, Gilles Trystram. Modeling and control of a mixed-flow rice dryer with emphasis on breakage quality. Journal of Food Engineering, 2001, 49, pp.303-309. ⟨10.1016/S0260-8774(00)00227-2⟩. ⟨hal-01200655⟩