Treating matrix nonlinearity in the binary model formulation for 3D ceramic composite structures

Abstract : A computationally-efficient numerical approach to treating matrix nonlinearity in ceramic matrix composite components has been developed and validated. The model employs a dual mesh comprising strings of line elements that represent the fiber tows and 3D effective medium elements that define the external geometry and embody the matrix-dominated properties. Validation addressed test data for unnotched and open-hole tension specimens. For these tests, the onset of nonlinearity and subsequent plasticity due to matrix microcracking and interfacial debonding and sliding are satisfactorily represented by a linear Drucker–Prager model for failure initiation in the effective medium along with a fully-associated flow rule with isotropic, perfectly-plastic flow. Composite failure is assumed to be correlated with the maximum local stress averaged over a gauge volume dictated by the fiber tow width. Using one set of specimens for calibration, very good predictions of the nonlinear stress–strain response and ultimate strength of other specimens are obtained.
Complete list of metadatas

https://hal.archives-ouvertes.fr/hal-01193310
Contributor : Martin Genet <>
Submitted on : Friday, September 4, 2015 - 6:02:43 PM
Last modification on : Thursday, August 8, 2019 - 11:42:03 AM

Identifiers

Citation

Shane Flores, Anthony G. Evans, Frank W. Zok, Martin Genet, Brian Cox, et al.. Treating matrix nonlinearity in the binary model formulation for 3D ceramic composite structures. Composites Part A: Applied Science and Manufacturing, Elsevier, 2010, 41 (2), pp.8. ⟨10.1016/j.compositesa.2009.10.020⟩. ⟨hal-01193310⟩

Share

Metrics

Record views

124