A. Aissa, A. Duchesne, C. Rodrigue, and D. , Polymer powders mixing part II: multi-component mixing dynamics using RGB color analysis, Chem. Eng. Sci, vol.65, issue.12, pp.3729-3738, 2010.

C. Ammarcha, C. Gatumel, J. L. Dirion, M. Cabassud, V. Mizonov et al., Transitory powder flow dynamics during emptying of a continuous mixer, Chem. Eng. Process. Process Intensif, vol.65, pp.68-75, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00876515

O. Berntsson, L. G. Danielsson, B. Lagerholm, and S. Folestad, Quantitative in-line monitoring of powder blending by near infrared reflection spectroscopy, Powder Technol, vol.123, issue.2-3, pp.185-193, 2002.

J. Bridgwater, Mixing of particles and powders: where next?, Particuology, vol.8, issue.6, pp.563-567, 2010.

R. L. Carr, Particle behavior storage and flow, Chem. Eng. J, vol.15, p.12, 1970.

C. Chatfield, The Analysis of Time Series: An Introduction, 2003.

P. V. Danckwerts, Theory of mixtures and mixing, Research (London), vol.6, pp.355-361, 1953.

G. Delaplace, R. K. Thakur, L. Bouvier, C. André, and C. Torrez, Dimensional analysis for planetary mixer: mixing time and Reynolds numbers, Chem. Eng. Sci, vol.62, issue.5, pp.1442-1447, 2007.

J. F. Demeyre, INPT PhD Thesis) 2007. Caractérisation de l'homogénéité de mélange de poudres et de l'agitation en mélangeur Triaxe ®

W. Entrop, International Symposium on Mixing. Mons, vol.1, pp.1-14, 1978.

L. A. Fullard, C. E. Davies, and G. C. Wake, Modelling powder mixing in mass flow discharge: a kinematic approach, Adv. Powder Technol, vol.24, issue.2, pp.499-506, 2013.

F. Geng, Y. Wang, Y. Li, L. Yuan, X. Wang et al., Numerical simulation on mixing dynamics of flexible filamentous particles in the transverse section of a rotary drum, Particuology, vol.11, issue.5, pp.594-600, 2013.

R. Gosselin, C. Duchesne, and D. Rodrigue, On the characterization of polymer powders mixing dynamics by texture analysis, Powder Technol, vol.183, issue.2, pp.177-188, 2008.

J. Gyenis, Assessment of mixing mechanism on the basis of concentration pattern, Chem. Eng. Process, vol.38, pp.665-674, 1999.

H. H. Hausner, Friction condition in a mass metal powder, Int. J. Powder Metall, vol.3, pp.7-13, 1967.

Y. R. He, H. S. Chen, Y. L. Ding, and B. Lickiss, Solids motion and segregation of binary mixtures in a rotating drum mixer, Chem. Eng. Res. Des, vol.85, issue.7, pp.963-973, 2007.

R. Hogg, Characterization of relative homogeneity in particulate mixtures, Int. J. Miner. Process, vol.72, pp.477-487, 2003.

D. M. Koller, A. Posch, G. Hörl, C. Voura, S. Radl et al., Continuous quantitative monitoring of powder mixing dynamics by near-infrared spectroscopy, Powder Technol, vol.205, issue.1-3, pp.87-96, 2011.

A. Kukukova, J. Aubin, and S. M. Kresta, A new definition of mixing and segregation: three dimensions of a key process variable, Chem. Eng. Res. Des, vol.87, pp.633-647, 2009.

I. V. Kushner, J. Moore, and F. , Scale-up model describing the impact of lubrication on tablet tensile strength, Int. J. Pharm, vol.399, issue.1-2, pp.19-30, 2010.

P. M. Lacey, Development in the theory of particle mixing, J. Appl. Chem, vol.4, pp.257-268, 1954.

M. Losada-martin, C. Gatumel, and H. Berthiaux, Caractérisation du mélange de poudres cohésives dans un mélangeur à tambour « chaotique, le Turbula ® . In: 4ème Congrès Science et Technologie des Poudres, Compiègne, Récents Progrès en Génie des Procédés, p.91, 2004.

M. Marigo, D. L. Cairns, M. Davies, A. Ingram, and E. H. Stitt, Developing mechanistic understanding of granular behavior in complex moving geometry using the discrete element method. Part B: Investigation of flow and mixing in the Turbula ® mixer, Powder Technol, vol.212, issue.1, pp.17-24, 2011.

M. Marigo, D. L. Cairn, M. Davies, M. Cook, A. Ingram et al., Developing mechanistic understanding of granular behavior in complex moving geometry using the discrete element method. Part A: Measurement and reconstruction of Turbula ® Mixer motion using positron emission particle tracking, Comput. Model. Eng. Sci, vol.59, pp.217-238, 2010.

M. Marigo, M. Davies, T. Leadbeater, D. L. Cairns, A. Ingram et al., Application of Positron Emission Particle Tracking (PEPT) to validate a Discrete Element Method (DEM) model of granular flow and mixing in the Turbula mixer, Int. J. Pharm, vol.446, issue.1-2, pp.46-58, 2013.

M. Marigo, D. L. Cairns, M. Davies, A. Ingram, and E. H. Stitt, A numerical comparison of mixing efficiencies of solids in a cylindrical vessel subject to a range of motions, Powder Technol, vol.217, pp.540-547, 2012.

S. Massol-chaudeur, H. Berthiaux, S. Muerza, and J. Dodds, A numerical model to identify the structure of a high-dilution powder mixture, Powder Technol, vol.128, pp.131-138, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01664123

S. Massol-chaudeur, H. Berthiaux, and J. A. Dodds, Experimental study of the mixing kinetics of binary pharmaceutical powder mixtures in a laboratory hoop mixer, Chem. Eng. Sci, vol.57, pp.4053-4065, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01664122

J. J. Mccarthy, Turning the corner in segregation, Powder Technol, vol.192, issue.2, pp.137-142, 2009.

J. Mellmann, The transverse motion of solids in rotating cylinders-forms of motion and transition behavior, Powder Technol, vol.118, issue.3, pp.251-270, 2001.

S. Muerza, H. Berthiaux, S. Massol-chaudeur, and G. Thomas, A dynamic study of static mixing using on-line image analysis, Powder Technol, vol.128, issue.2-3, pp.195-204, 2002.
URL : https://hal.archives-ouvertes.fr/emse-00609812

B. A. Obadele, Z. H. Masuku, and P. A. Olubambi, Turbula mixing characteristics of carbide powders and its influence on laser processing of stainless steel composite coatings, Powder Technol, vol.230, pp.169-182, 2012.

H. E. Rose, A suggested equation relating to the mixing of powders and its application to the study of the performance of certain types of machines, Trans. AIChE, vol.37, p.47, 1959.

E. Sahni, R. Yau, and B. Chaudhuri, Understanding granular mixing to enhance coating performance in a pan coater: experiments and simulations, Powder Technol, vol.205, issue.1-3, pp.231-241, 2011.

M. Sato, T. Yano, and K. J. Miyanami, J. Soc. Powder Technol. Jpn, vol.16, issue.3, 1979.

N. Sommier, Etude du mélange et de la ségrégation de systèmes granulaires non cohésifs et applications pharmaceutiques, 2000.

N. Sommier, P. Porion, P. Evesque, B. Leclerc, P. Tchoreloff et al., Magnetic resonance imaging investigation of the mixing-segregation process in a pharmaceutical blender, Int. J. Pharm, vol.222, issue.2, pp.243-258, 2001.

S. Sundell-bredenberg and C. Nyström, The possibility of achieving an interactive mixture with high dose homogeneity containing an extremely low proportion of a micronised drug, Eur. J. Pharm. Sci, vol.12, issue.3, pp.285-295, 2001.

C. Schofield, Assessing mixtures by autocorrelation, Trans. IChemE, vol.48, pp.28-34, 1970.

J. D. Tjakra, J. Bao, N. Hudon, and R. Yang, Collective dynamics modeling of polydisperse particulate systems via Markov chains, Chem. Eng. Res. Des, vol.91, issue.9, pp.1646-1659, 2013.

A. U. Vanarase, J. G. Osorio, and F. J. Muzzio, Effects of powder flow properties and shear environment on the performance of continuous mixing of pharmaceutical powders, Powder Technol, vol.246, pp.63-72, 2013.

H. J. Venables and J. I. Wells, Powder mixing, Drug Dev. Ind. Pharm, vol.27, issue.7, pp.599-612, 2001.

J. C. Williams, The segregation of particulate materials. A review, Powder Technol, vol.15, issue.2, pp.245-251, 1976.