J. Jewell, R. Kennedy, and A. Menard, CFM Unveils New LEAP-X Engine, 2008.

V. A. Guénon, T. W. Chou, and J. W. Gillespie, Toughness properties of a three-dimensional carbon-epoxy composite, Journal of Materials Science, vol.2, issue.2, pp.4168-4175, 1989.
DOI : 10.1007/BF01168991

J. Brandt, K. Drechsler, and F. J. Arendts, Mechanical performance of composites based on various three-dimensional woven-fibre preforms, Composites Science and Technology, vol.56, issue.3, pp.381-386, 1996.
DOI : 10.1016/0266-3538(95)00135-2

R. Kamiya, B. A. Cheeseman, P. Popper, and T. Chou, Some recent advances in the fabrication and design of three-dimensional textile preforms: a review, Composites Science and Technology, vol.60, issue.1, pp.33-47, 2000.
DOI : 10.1016/S0266-3538(99)00093-7

P. Badel, E. Vidal-sallé, E. Maire, and P. Boisse, Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale, Composites Science and Technology, vol.68, issue.12, pp.2433-2440, 2008.
DOI : 10.1016/j.compscitech.2008.04.038
URL : https://hal.archives-ouvertes.fr/hal-00850080

E. De-luycker, F. Morestin, P. Boisse, and D. Marsal, Simulation of 3D interlock composite preforming, Composite Structures, vol.88, issue.4, pp.615-623, 2009.
DOI : 10.1016/j.compstruct.2008.06.005
URL : https://hal.archives-ouvertes.fr/hal-00391623

D. Durville, Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, International Journal of Material Forming, vol.49, issue.7???8, p.1251, 1241.
DOI : 10.1007/s12289-009-0674-7
URL : https://hal.archives-ouvertes.fr/hal-00495110

C. Hage, R. Younès, Z. Aboura, M. L. Benzeggagh, and M. Zoater, Analytical and Numerical Modeling of Mechanical Characteristics of Orthogonal 3D CFRP, Proc. 14th JNC, pp.699-708, 2005.

S. V. Lomov, G. Perie, D. S. Ivanov, I. Verpoest, and D. Marsal, Modeling three-dimensional fabrics and three-dimensional reinforced composites: challenges and solutions, Textile Research Journal, vol.39, issue.1, pp.28-41, 2011.
DOI : 10.1177/0040517510385169

P. Lapeyronnie, P. Le-grognec, C. Binétruy, and F. Boussu, Homogenization of the elastic behavior of a layer-to-layer angle-interlock composite, Composite Structures, vol.93, issue.11, pp.932795-2807, 2011.
DOI : 10.1016/j.compstruct.2011.05.025

R. C. Aster, B. Borchers, and C. H. Thurber, Parameter estimation and inverse problems, 2013.

B. Weber, P. Paultre, and J. Proulx, Structural damage detection using nonlinear parameter identification with Tikhonov regularization, Structural Control and Health Monitoring, vol.59, issue.168, pp.406-427, 2006.
DOI : 10.1002/stc.164

B. Rahmani, F. Mortazavi, I. Villemure, and M. Levesque, A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating, Composite Structures, vol.105, issue.6, pp.116-125, 2013.
DOI : 10.1016/j.compstruct.2013.04.025

J. Molimard, R. Le-riche, A. Vautrin, and J. R. Lee, Identification of the four orthotropic plate stiffnesses using a single open-hole tensile test, Experimental Mechanics, vol.4, issue.1, pp.404-411, 2005.
DOI : 10.1007/BF02427987
URL : https://hal.archives-ouvertes.fr/emse-00687052

A. Moussawi, G. Lubineau, E. Florentin, and B. Blaysat, The constitutive compatibility method for identification of material parameters based on full-field measurements, Computer Methods in Applied Mechanics and Engineering, vol.265, pp.1-14, 2013.
DOI : 10.1016/j.cma.2013.06.003

R. Gras, S. Roux, H. Leclerc, J. Périé, S. Otin et al., Identification of the Out-of-Plane Shear Modulus of a 3D Woven Composite, Experimental Mechanics, vol.65, issue.5, pp.719-730, 2012.
DOI : 10.1007/s11340-012-9683-4

M. A. Sutton, J. H. Yan, V. Tiwari, H. W. Schreier, and J. J. Orteu, The effect of out-of-plane motion on 2D and 3D digital image correlation measurements, Optics and Lasers in Engineering, vol.46, issue.10, pp.46746-757, 2008.
DOI : 10.1016/j.optlaseng.2008.05.005

S. Buchanan, A. Grigorash, E. Archer, A. Mcilhagger, J. Quinn et al., Analytical elastic stiffness model for 3D woven orthogonal interlock composites, Composites Science and Technology, vol.70, issue.11, pp.1597-1604, 2010.
DOI : 10.1016/j.compscitech.2010.05.019
URL : https://hal.archives-ouvertes.fr/hal-00666483

S. Nehme, A. Hallal, F. Fardoun, R. Younes, B. Hagege et al., Numerical/analytical methods to evaluate the mechanical behavior of interlock composites, Journal of Composite Materials, vol.45, issue.16, pp.451699-1716, 2011.
DOI : 10.1177/0021998310385592

G. Besnard, F. Hild, and S. Roux, ???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.789-804, 2006.
DOI : 10.1007/s11340-006-9824-8

M. A. Sutton, W. J. Wolters, W. H. Peters, W. F. Ranson, and S. R. Mcneill, Determination of displacements using an improved digital correlation method, Image and Vision Computing, vol.1, issue.3, pp.133-139, 1983.
DOI : 10.1016/0262-8856(83)90064-1

M. Bornert, F. Brémand, P. Doumalin, J. Dupré, M. Fazzini et al., Assessment of Digital Image Correlation Measurement Errors: Methodology and Results, Experimental Mechanics, vol.43, issue.4, pp.49353-370, 2009.
DOI : 10.1007/s11340-008-9204-7
URL : https://hal.archives-ouvertes.fr/hal-00881043

H. W. Schreier, J. R. Braasch, and M. A. Sutton, Systematic errors in digital image correlation caused by intensity interpolation, Optical Engineering, vol.39, issue.11, pp.392915-2921, 2000.
DOI : 10.1117/1.1314593

S. Avril, M. Bonnet, A. Bretelle, M. Grédiac, F. Hild et al., Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements, Experimental Mechanics, vol.48, issue.4, pp.381-402, 2008.
DOI : 10.1007/s11340-008-9148-y
URL : https://hal.archives-ouvertes.fr/hal-00274639

K. T. Kavanagh and R. W. Clough, Finite element applications in the characterization of elastic solids, International Journal of Solids and Structures, vol.7, issue.1, pp.11-23, 1971.
DOI : 10.1016/0020-7683(71)90015-1

D. Lecompte, A. Smits, H. Sol, J. Vantomme, and D. V. Hemelrijck, Mixed numerical???experimental technique for orthotropic parameter identification using biaxial tensile tests on cruciform specimens, International Journal of Solids and Structures, vol.44, issue.5, pp.1643-1656, 2007.
DOI : 10.1016/j.ijsolstr.2006.06.050

S. Roux and F. Hild, Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches, International Journal of Fracture, vol.40, issue.1, pp.141-157, 2006.
DOI : 10.1007/s10704-006-6631-2
URL : https://hal.archives-ouvertes.fr/hal-00013818

E. J. Van-campen, Parameter Identification of the Orthotropic Material Wood, 1992.

H. Leclerc, Nouveaux outils de mécanique et d'analyse numérique pour le LMT. Séminaire du LMT Cachan, 2005.

H. Leclerc, Plateforme metil : optimisations et facilités liées à la génération de code, Colloque National en Calcul des Strucutures, 2007.

J. Réthoré and M. François, Curve and boundaries measurement using B-splines and virtual images, Optics and Lasers in Engineering, vol.52, issue.1, pp.145-155, 2014.
DOI : 10.1016/j.optlaseng.2013.06.018

J. Réthoré, A fully integrated noise robust strategy for the identification of constitutive laws from digital images, International Journal for Numerical Methods in Engineering, vol.199, issue.21-22, pp.631-660, 2010.
DOI : 10.1002/nme.2908

H. Leclerc, J. Périé, S. Roux, and F. Hild, Voxel-Scale Digital Volume Correlation, Experimental Mechanics, vol.22, issue.9, pp.479-490, 2011.
DOI : 10.1007/s11340-010-9407-6
URL : https://hal.archives-ouvertes.fr/hal-00521193

F. Hild and S. Roux, Comparison of Local and Global Approaches to Digital Image Correlation, Experimental Mechanics, vol.39, issue.8, pp.1503-1519, 2012.
DOI : 10.1007/s11340-012-9603-7
URL : https://hal.archives-ouvertes.fr/hal-00750756

G. Huysmans, I. Verpoest, and P. Van-houtte, A poly-inclusion approach for the elastic modelling of knitted fabric composites, Acta Materialia, vol.46, issue.9, pp.3003-3013, 1998.
DOI : 10.1016/S1359-6454(98)00021-4

H. Leclerc, J. Périé, S. Roux, and F. Hild, Integrated Digital Image Correlation for the Identification of Mechanical Properties, Computer Vision/Computer Graphics Collaboration Techniques, pp.161-171, 2009.
DOI : 10.1016/j.ijsolstr.2006.11.024