Inflation and bending of an orthotropic inflatable beam

Quang-Tung Nguyen (1) , Jean-Christophe Thomas (2) , Anh Le Van (2)

1 DUT - University of Science and Technology [Danang]
2 TRUST - Contrôle de santé fiabilité et calcul des structures

An inflatable beam is an airtight structure made of a soft technical fabric and subjected to an internal pressure which gives it a final cylindrical shape, a pre-stress in the membrane and a bearing capacity. Against all appearances, it is not a standard beam and it requires a specific formulation in order to take account of the internal pressure which plays a key role in its mechanical response. This work deals with inflatable beams made of orthotropic materials. The first part of the paper is concerned with the inflation of the membrane tube, an important stage which is often neglected so far in the literature. As preliminaries of the bending problem studied in the next part of the paper, the constitutive law related to the inflated state of the tube – not the natural state – is investigated. It will be shown that the consti-tutive law related to the inflated pre-stressed state is not the same as the constitutive law related to the natural state. Expressions of the material coefficients involved in the former constitutive law will be established from the material coefficients defined on the natural reference configuration which are the only ones supposed to be known. The second part of the paper deals with the bending of the inflatable beam. The Tim-oshenko beam kinematics will be chosen because of the significant shear effect in the tube wall and the problem will be formulated in finite deformations in order to accounts for all the nonlinear effects, in particular the action due to the internal pressure which is a follower load. The nonlinear system of equations obtained will then be linearized around the pre-stressed configuration and will result in a more tractable linear system. The proposed formulation allows a comprehensive study of the influence of the internal pressure on the geometry and material properties of orthotropic inflatable beams The analytical results will be compared with numerical results obtained from a nonlinear membrane finite element code.

Mots clés: Inflatable beam; membrane tube; orthotropy; inflation; bending

Domaines: Mécanique [physics]

Quang-Tung Nguyen, Jean-Christophe Thomas, Anh Le Van. Inflation and bending of an orthotropic inflatable beam. Thin-Walled Structures, 2015, pp.129-144. ⟨10.1016/j.tws.2014.11.015⟩. ⟨hal-01154692⟩