L. Delauney, C. Compère, and M. Lehaitre, Biofouling protection for marine environmental sensors, Ocean Science, vol.6, issue.2, pp.503-511, 2010.
DOI : 10.5194/os-6-503-2010

T. Hong and M. Nagumo, The effect of chloride concentration on early stages of pitting for type 304 stainless steel revealed by the AC impedance method, Corrosion Science, vol.39, issue.2, pp.285-293, 1997.
DOI : 10.1016/S0010-938X(96)00127-8

S. Meth, N. Savchenko, F. A. Viva, D. Starosvetsky, A. Groysman et al., Siloxane-based thin films for corrosion protection of stainless steel in chloride media, Journal of Applied Electrochemistry, vol.419, issue.511, pp.41-885, 2011.
DOI : 10.1007/s10800-011-0291-2

Y. J. Ren, J. Chen, and C. L. Zeng, Corrosion protection of type 304 stainless steel bipolar plates of proton-exchange membrane fuel cells by doped polyaniline coating, Journal of Power Sources, vol.195, issue.7, pp.1914-1919, 2010.
DOI : 10.1016/j.jpowsour.2009.10.003

U. León-silva, M. E. Nicho, J. G. González-rodríguez, J. G. Chacón-nava, and V. M. Salinas-bravo, Effect of thermal annealing of poly(3-octylthiophene) films covered stainless steel on corrosion properties, Journal of Solid State Electrochemistry, vol.41, issue.5, pp.1089-1100, 2010.
DOI : 10.1007/s10008-009-0918-y

C. Martinez, M. Sancy, J. H. Zagal, F. M. Rabagliati, B. Tribollet et al., A zirconia-polyester glycol coating on differently pretreated AISI 316L stainless steel: corrosion behavior in chloride solution, Journal of Solid State Electrochemistry, vol.45, issue.9, pp.1327-1337, 2009.
DOI : 10.1007/s10008-008-0674-4

H. Yun, J. Li, H. Chen, and C. Lin, A study on the N-, S- and Cl-modified nano-TiO2 coatings for corrosion protection of stainless steel, Electrochimica Acta, vol.52, issue.24, pp.6679-6685, 2007.
DOI : 10.1016/j.electacta.2007.04.078

S. E. Potts, L. Schmalz, M. Fenker, B. Díaz, J. S. ´-wiatowska et al., Ultra-Thin Aluminium Oxide Films Deposited by Plasma-Enhanced Atomic Layer Deposition for Corrosion Protection, Journal of The Electrochemical Society, vol.158, issue.5, pp.132-138, 2011.
DOI : 10.1149/1.3560197
URL : http://repository.tue.nl/711620

E. Harkonen, B. Diaz, J. Swiatowska, V. Maurice, A. Seyeux et al., Corrosion Protection of Steel with Oxide Nanolaminates Grown by Atomic Layer Deposition, Journal of The Electrochemical Society, vol.158, issue.11, pp.158-369, 2011.
DOI : 10.1149/2.061111jes

Y. J. Ren and C. L. Zeng, Corrosion protection of 304 stainless steel bipolar plates using TiC films produced by high-energy micro-arc alloying process, Journal of Power Sources, vol.171, issue.2, pp.778-782, 2007.
DOI : 10.1016/j.jpowsour.2007.06.075

A. Gleizes, C. Vahlas, M. M. Sovar, D. Samélor, and M. C. Lafont, Chemical vapor deposited aluminium oxide coatings from aluminium tri-iso-propoxide: correlation between processing conditions and composition, Chem. Vap. Dep, pp.13-23, 2007.
DOI : 10.1002/cvde.200606532

M. M. Sovar, D. Samélor, A. N. Gleizes, and C. Vahlas, Aluminium tri-iso-propoxide: Shelf life, transport properties, and decomposition kinetics for the low temperature processing of aluminium oxide-based coatings, Surface and Coatings Technology, vol.201, issue.22-23, pp.9159-9162, 2007.
DOI : 10.1016/j.surfcoat.2007.04.063

H. Vergnes, D. Samelor, A. Gleizes, C. Vahlas, and B. Caussat, Local kinetic modeling of aluminium oxide metal organic chemical vapor deposition from aluminium tri-isopropoxide, Chem. Vap. Dep, pp.17-181, 2011.

D. Samélor, A. M. Lazar, M. Aufray, C. Tendero, L. Lacroix et al., Amorphous Alumina Coatings: Processing, Structure and Remarkable Barrier Properties, Journal of Nanoscience and Nanotechnology, vol.11, issue.9, pp.11-8387, 2011.
DOI : 10.1166/jnn.2011.5068

]. Y. Balcaen, N. Radutoiu, J. Alexis, J. D. Béguin, L. Lacroix et al., Mechanical and barrier properties of MOCVD processed alumina coatings on TA6V titanium alloy, Surf. Coat. Technol, pp.206-1684, 2011.

J. D. Béguin, D. Adrian, J. A. Petit, J. P. Rivière, C. Vahlas et al., Improvement of salt corrosion resistance of titanium alloys by PVD and CVD coatings, Surface Modification Technologies XX, pp.59-63, 2006.

G. Boisier, M. Raciulete, D. Samélor, N. Pébère, A. N. Gleizes et al., Electrochemical Behavior of Chemical Vapor Deposited Protective Aluminum Oxide Coatings on Ti6242 Titanium Alloy, Electrochemical and Solid-State Letters, vol.11, issue.10, pp.55-57, 2008.
DOI : 10.1149/1.2968109
URL : https://hal.archives-ouvertes.fr/hal-00806102

D. Samélor, M. Aufray, L. Lacroix, Y. Balcaen, J. Alexis et al., Mechanical and surface properties of chemical vapour deposited protective aluminium oxide films on TA6V alloy, Adv. Sci. Technol, pp.66-66, 2010.

U. Aschauer, P. Bowen, and S. C. Parker, Oxygen vacancy diffusion in alumina: New atomistic simulation methods applied to an old problem, Acta Materialia, vol.57, issue.16, pp.4765-4772, 2009.
DOI : 10.1016/j.actamat.2009.06.061

S. D. Hersee and J. M. Ballingall, The operation of metalorganic bubblers at reduced pressure, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.8, issue.2, pp.8-800, 1989.
DOI : 10.1116/1.576921

R. H. Bleyerveld, W. Fieggen, and H. Gerding, Structure and physical properties of aluminium alkoxides. Part IV: Vapour pressures of aluminium isopropoxide, Recueil des Travaux Chimiques des Pays-Bas, vol.2, issue.4, pp.477-482, 1972.
DOI : 10.1002/recl.19720910410

R. C. Mehrotra, Aluminium alkoxides, J. Indian Chem. Soc, vol.30, pp.585-591, 1953.
DOI : 10.1002/zaac.19613110310

K. J. Sladek and W. W. Gibert, Low temperature metal oxide deposition by alkoxide hydrolysis The American Nuclear Society, pp.215-231, 1972.

S. Cissé, L. Laffont, B. Tanguy, M. Lafont, and E. Andrieu, Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water, Corrosion Science, vol.56, pp.56-209, 2012.
DOI : 10.1016/j.corsci.2011.12.007

L. P. Jeurgens, W. G. Sloof, F. D. Tichelaar, C. G. Borsboom, and E. J. Mittemeijer, Determination of thickness and composition of aluminium-oxide overlayers on aluminium substrates, Applied Surface Science, vol.144, issue.145, pp.144-145, 1999.
DOI : 10.1016/S0169-4332(98)00755-7

B. Diaz, E. Härkönen, J. Swiatowska, V. Maurice, A. Seyeux et al., Low-temperature atomic layer deposition of Al 2 O 3 thin coatings for corrosion protection of steel: surface and electrochemical analysis, Corros. Sci, pp.53-2168, 2011.

B. Diaz, J. Swiatowska, V. Maurice, A. Seyeux, B. Normand et al., Electrochemical and time-of-flight secondary ion mass spectrometry analysis of ultra-thin metal oxide (Al2O3 and Ta2O5) coatings deposited by atomic layer deposition on stainless steel, Electrochimica Acta, vol.56, issue.28, pp.10516-10523, 2011.
DOI : 10.1016/j.electacta.2011.02.074

M. Kendig, A. Davenport, and H. Isaacs, The mechanism of corrosion inhibition by chromate conversion coatings from x-ray absorption near edge spectroscopy (Xanes), Corrosion Science, vol.34, issue.1, pp.41-49, 1993.
DOI : 10.1016/0010-938X(93)90257-H

S. Pyun and W. Lee, The effect of prior Cl??? ion incorporation into native oxide film on pure aluminium in neutral chloride solution on pit initiation, Corrosion Science, vol.43, issue.2, pp.43-353, 2001.
DOI : 10.1016/S0010-938X(00)00077-9

E. Mccafferty, The electrode kinetics of pit initiation on aluminum, Corrosion Science, vol.37, issue.3, pp.481-492, 1995.
DOI : 10.1016/0010-938X(94)00150-5

M. E. Orazem, N. Pébère, and B. Tribollet, Enhanced Graphical Representation of Electrochemical Impedance Data, Journal of The Electrochemical Society, vol.153, issue.4, pp.129-136, 2006.
DOI : 10.1149/1.2168377

W. M. Haynes, CRC Handbook of Chemistry and Physics