C. Thornton, K. K. Yin, and M. J. Adams, Numerical simulation of the impact fracture and fragmentation of agglomerates, Journal of Physics D: Applied Physics, vol.29, issue.2, p.424, 1996.
DOI : 10.1088/0022-3727/29/2/021

C. Couroyer, Z. Ning, and M. Ghadiri, Distinct element analysis of bulk crushing: effect of particle properties and loading rate, Powder Technology, vol.109, issue.1-3, p.241, 2000.
DOI : 10.1016/S0032-5910(99)00240-5

A. V. Potapov and C. S. Campbell, Parametric dependence of particle breakage mechanisms, Powder Technology, vol.120, issue.3, p.164, 2001.
DOI : 10.1016/S0032-5910(01)00272-8

C. Hosten and H. Cimilli, The effects of feed size distribution on confined-bed comminution of quartz and calcite in piston-die press, International Journal of Mineral Processing, vol.91, issue.3-4, p.81, 2009.
DOI : 10.1016/j.minpro.2009.01.002

L. Liu, K. Kafui, and C. Thornton, Impact breakage of spherical, cuboidal and cylindrical agglomerates, Powder Technology, vol.199, issue.2, p.189, 2010.
DOI : 10.1016/j.powtec.2010.01.007

J. Jaeger, Failure of rocks under tensile conditions, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.4, issue.2, pp.219-227, 1967.
DOI : 10.1016/0148-9062(67)90046-0

K. L. Lee, I. Farhoomand, and . Can, Compressibility And Crushing Of Granular Soil In Anisotropic Triaxial Compression, Canadian Geotechnical Journal, vol.4, issue.1, p.68, 1967.
DOI : 10.1139/t67-012

P. V. Lade, J. A. Yamamuro, and P. A. Bopp, Significance of Particle Crushing in Granular Materials, Journal of Geotechnical Engineering, vol.122, issue.4, p.309, 1996.
DOI : 10.1061/(ASCE)0733-9410(1996)122:4(309)

M. R. Coop, K. K. Sorensen, T. B. Freitas, and G. Georgoutsos, Particle breakage during shearing of a carbonate sand, G??otechnique, vol.54, issue.3, p.157, 2004.
DOI : 10.1680/geot.2004.54.3.157

B. Imre, J. Laue, and S. M. Springman, Fractal fragmentation of rocks within sturzstroms: insight derived from physical experiments within the ETH geotechnical drum centrifuge, Granular Matter, vol.154, issue.3757, p.267, 2010.
DOI : 10.1007/s10035-009-0163-1

A. Ezaoui, T. Lecompte, H. D. Benedetto, and E. Garcia, Effects of various loading stress paths on the stress-strain properties and on crushability of an industrial soft granular material, Granular Matter, vol.18, issue.3, p.283, 2011.
DOI : 10.1007/s10035-010-0227-2
URL : https://hal.archives-ouvertes.fr/hal-00716286

F. Casini, G. M. Viggiani, and S. M. Springman, Breakage of an artificial crushable material under loading, Granular Matter, vol.27, issue.4, p.661, 2013.
DOI : 10.1007/s10035-013-0432-x

J. Huang, S. Xu, and S. Hu, Influence of particle breakage on the dynamic compression responses of brittle granular materials, Mechanics of Materials, vol.68, p.15, 2014.
DOI : 10.1016/j.mechmat.2013.08.002

H. Liu, S. Kou, and P. Lindqvist, Numerical studies on the inter-particle breakage of a confined particle assembly in rock crushing, Mechanics of Materials, vol.37, issue.9, p.935, 2005.
DOI : 10.1016/j.mechmat.2004.10.002

W. Schubert, M. Khanal, and J. Tomas, Impact crushing of particle???particle compounds???experiment and simulation, International Journal of Mineral Processing, vol.75, issue.1-2, p.41, 2005.
DOI : 10.1016/j.minpro.2004.01.006

A. Bäckström, J. Antikainen, T. Backers, X. Feng, L. Jing et al., Numerical modelling of uniaxial compressive failure of granite with and without saline porewater, International Journal of Rock Mechanics and Mining Sciences, vol.45, issue.7, p.1126, 2008.
DOI : 10.1016/j.ijrmms.2007.12.001

R. Moreno, M. Ghadiri, and S. Antony, Effect of the impact angle on the breakage of agglomerates: a numerical study using DEM, Powder Technology, vol.130, issue.1-3, p.132, 2003.
DOI : 10.1016/S0032-5910(02)00256-5

S. Antonyuk, M. Khanal, J. Tomas, S. Heinrich, and L. Mörl, Impact breakage of spherical granules: Experimental study and DEM simulation, Chemical Engineering and Processing: Process Intensification, vol.45, issue.10, p.838, 2006.
DOI : 10.1016/j.cep.2005.12.005

F. Wittel, H. Carmona, F. Kun, and H. Herrmann, Mechanisms in impact fragmentation, International Journal of Fracture, vol.140, issue.34, p.105, 2008.
DOI : 10.1007/s10704-008-9267-6

J. Wang and H. Yan, On the role of particle breakage in the shear failure behavior of granular soils by DEM, International Journal for Numerical and Analytical Methods in Geomechanics, vol.91, issue.B2, p.832, 2013.
DOI : 10.1002/nag.1124

G. Ma, W. Zhou, and X. Chang, Modeling the particle breakage of rockfill materials with the cohesive crack model, Computers and Geotechnics, vol.61, p.132, 2014.
DOI : 10.1016/j.compgeo.2014.05.006

D. Potyondy and P. Cundall, A bonded-particle model for rock, International Journal of Rock Mechanics and Mining Sciences, vol.41, issue.8, p.1329, 2004.
DOI : 10.1016/j.ijrmms.2004.09.011

N. Cho, C. Martin, and D. Sego, A clumped particle model for rock, International Journal of Rock Mechanics and Mining Sciences, vol.44, issue.7, p.997, 2007.
DOI : 10.1016/j.ijrmms.2007.02.002

S. Abe and K. Mair, Effects of gouge fragment shape on fault friction: New 3D modelling results, Geophysical Research Letters, vol.19, issue.B10, p.23302, 2009.
DOI : 10.1029/2009GL040684

G. Timár, F. Kun, H. A. Carmona, and H. J. Herrmann, Scaling laws for impact fragmentation of spherical solids, Physical Review E, vol.86, issue.1, p.16113, 2012.
DOI : 10.1103/PhysRevE.86.016113

M. J. Metzger and B. J. Glasser, Numerical investigation of the breakage of bonded agglomerates during impact, Powder Technology, vol.217, p.304, 2012.
DOI : 10.1016/j.powtec.2011.10.042

T. Ueda, T. Matsushima, and Y. Yamada, DEM simulation on the one-dimensional compression behavior of various shaped crushable granular materials, Granular Matter, vol.12, issue.3, p.675, 2013.
DOI : 10.1007/s10035-013-0415-y

J. Astrom and H. Herrmann, Fragmentation of grains in a two-dimensional packing, The European Physical Journal B, vol.5, issue.3, p.551, 1998.
DOI : 10.1007/s100510050476

O. Tsoungui, D. Vallet, and J. Charmet, Numerical model of crushing of grains inside two-dimensional granular materials, Powder Technology, vol.105, issue.1-3, p.190, 1999.
DOI : 10.1016/S0032-5910(99)00137-0

O. Ben-nun, I. Einav, and A. Tordesillas, Force Attractor in Confined Comminution of Granular Materials, Physical Review Letters, vol.104, issue.10, p.108001, 2010.
DOI : 10.1103/PhysRevLett.104.108001

L. Elghezal, M. Jamei, and I. Georgopoulos, DEM simulations of stiff and soft materials with crushable particles: an application of expanded perlite as a soft granular material, Granular Matter, vol.91, issue.B2, p.685, 2013.
DOI : 10.1007/s10035-013-0406-z

V. Esnault and J. Roux, 3D numerical simulation study of quasistatic grinding process on a model granular material, Mechanics of Materials, vol.66, p.88, 2013.
DOI : 10.1016/j.mechmat.2013.07.018
URL : https://hal.archives-ouvertes.fr/hal-00946069

F. Kun and H. J. Herrmann, A study of fragmentation processes using a discrete element method, Computer Methods in Applied Mechanics and Engineering, vol.138, issue.1-4, p.3, 1996.
DOI : 10.1016/S0045-7825(96)01012-2

G. D. 'addetta, F. Kun, and E. Ramm, On the application of a discrete model to the fracture process of cohesive granular materials, Granular Matter, vol.4, issue.2, p.77, 2002.
DOI : 10.1007/s10035-002-0103-9

S. Galindo-torres, D. Pedroso, D. Williams, and L. Li, Breaking processes in three-dimensional bonded granular materials with general shapes, Computer Physics Communications, vol.183, issue.2, p.266, 2012.
DOI : 10.1016/j.cpc.2011.10.001

F. Radja¨?radja¨? and V. Richefeu, Contact dynamics as a nonsmooth discrete element method, Mechanics of Materials, vol.41, issue.6, p.715, 2009.
DOI : 10.1016/j.mechmat.2009.01.028

M. Jean, The non-smooth contact dynamics method, Computer Methods in Applied Mechanics and Engineering, vol.177, issue.3-4, p.235, 1999.
DOI : 10.1016/S0045-7825(98)00383-1
URL : https://hal.archives-ouvertes.fr/hal-01390459

J. Moreau and E. J. Mech, A Solids Supp, p.93, 1994.

F. Radjai, M. Jean, J. Moreau, and S. Roux, Force Distributions in Dense Two-Dimensional Granular Systems, Physical Review Letters, vol.77, issue.2, p.274, 1996.
DOI : 10.1103/PhysRevLett.77.274
URL : https://hal.archives-ouvertes.fr/hal-00759668

L. Staron, J. Vilotte, and F. Radjai, Preavalanche Instabilities in a Granular Pile, Physical Review Letters, vol.89, issue.20, p.204302, 2002.
DOI : 10.1103/PhysRevLett.89.204302
URL : https://hal.archives-ouvertes.fr/hal-00120707

M. Renouf and P. Alart, Conjugate gradient type algorithms for frictional multi-contact problems: applications to granular materials, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.18-20, p.2019, 2005.
DOI : 10.1016/j.cma.2004.07.009
URL : https://hal.archives-ouvertes.fr/hal-01393138

E. Azéma, F. Radja¨?radja¨?, R. Peyroux, F. Dubois, and G. Saussine, Vibrational dynamics of confined granular materials, Physical Review E, vol.74, issue.3, p.31302, 2006.
DOI : 10.1103/PhysRevE.74.031302

N. Estrada, A. Taboada, and F. Radja¨?radja¨?, Shear strength and force transmission in granular media with rolling resistance, Physical Review E, vol.78, issue.2, p.21301, 2008.
DOI : 10.1103/PhysRevE.78.021301
URL : https://hal.archives-ouvertes.fr/hal-00412020

E. Azéma and F. Radja¨?radja¨?, Stress-strain behavior and geometrical properties of packings of elongated particles, Physical Review E, vol.81, issue.5, p.51304, 2010.
DOI : 10.1103/PhysRevE.81.051304

E. Azéma and F. Radja¨?radja¨?, Force chains and contact network topology in sheared packings of elongated particles, Physical Review E, vol.85, issue.3, p.31303, 2012.
DOI : 10.1103/PhysRevE.85.031303

N. Estrada, E. Azéma, F. Radjai, and A. Taboada, Identification of rolling resistance as a shape parameter in sheared granular media, Physical Review E, vol.84, issue.1, p.11306, 2011.
DOI : 10.1103/PhysRevE.84.011306
URL : https://hal.archives-ouvertes.fr/hal-00594891

V. Visseq, A. Martin, D. Iceta, E. Azéma, D. Dureisseix et al., Dense granular dynamics analysis by a domain decomposition approach, Computational Mechanics, vol.102, issue.19???22, p.709, 2012.
DOI : 10.1007/s00466-012-0699-5
URL : https://hal.archives-ouvertes.fr/hal-00689838

B. Saint-cyr, J. Delenne, C. Voivret, F. Radjai, and P. Sornay, Rheology of granular materials composed of nonconvex particles, Physical Review E, vol.84, issue.4, p.41302, 2011.
DOI : 10.1103/PhysRevE.84.041302
URL : https://hal.archives-ouvertes.fr/hal-00759629

J. C. Quezada, P. Breul, G. Saussine, and F. Radjai, Stability, deformation, and variability of granular fills composed of polyhedral particles, Physical Review E, vol.86, issue.3, p.31308, 2012.
DOI : 10.1103/PhysRevE.86.031308

C. Voivret, F. Radja¨?radja¨?, J. Delenne, and M. S. Youssoufi, Multiscale Force Networks in Highly Polydisperse Granular Media, Physical Review Letters, vol.102, issue.17, p.178001, 2009.
DOI : 10.1103/PhysRevLett.102.178001
URL : https://hal.archives-ouvertes.fr/hal-00689872

D. Kadau, G. Bartels, L. Brendel, and D. E. Wolf, Contact dynamics simulations of compacting cohesive granular systems, Computer Physics Communications, vol.147, issue.1-2, p.190, 2002.
DOI : 10.1016/S0010-4655(02)00242-4

I. Bratberg, F. Radjai, and A. Hansen, Dynamic rearrangements and packing regimes in randomly deposited two-dimensional granular beds, Physical Review E, vol.66, issue.3, p.31303, 2002.
DOI : 10.1103/PhysRevE.66.031303
URL : https://hal.archives-ouvertes.fr/hal-00759657

D. Nguyen, E. Azéma, F. Radjai, and P. Sornay, Effect of size polydispersity versus particle shape in dense granular media, Physical Review E, vol.90, issue.1, p.12202, 2014.
DOI : 10.1103/PhysRevE.90.012202
URL : https://hal.archives-ouvertes.fr/hal-01059980

E. Azéma, N. Estrada, and F. Radja¨?radja¨?, Nonlinear effects of particle shape angularity in sheared granular media, Physical Review E, vol.86, issue.4, p.41301, 2012.
DOI : 10.1103/PhysRevE.86.041301

G. Saussine, C. Cholet, P. Gautier, F. Dubois, C. Bohatier et al., Modelling ballast behaviour under dynamic loading. Part 1: A 2D polygonal discrete element method approach, Computer Methods in Applied Mechanics and Engineering, vol.195, issue.19-22, p.2841, 2006.
DOI : 10.1016/j.cma.2005.07.006
URL : https://hal.archives-ouvertes.fr/hal-00580793

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, p.163, 1920.
DOI : 10.1098/rsta.1921.0006

X. Gao, R. Dodds, R. Tregoning, J. Joyce, R. Link et al., A Weibull stress model to predict cleavage fracture in plates containing surface cracks, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.35, issue.6, p.481, 1999.
DOI : 10.1108/02644409810200686

Z. Bertalan, A. Shekhawat, J. P. Sethna, and S. Zapperi, Fracture Strength: Stress Concentration, Extreme Value Statistics, and the Fate of the Weibull Distribution, Physical Review Applied, vol.2, issue.3, p.34008, 2014.
DOI : 10.1103/PhysRevApplied.2.034008

S. Batdorf and H. Heinisch, Weakest Link Theory Reformulated for Arbitrary Fracture Criterion, Journal of the American Ceramic Society, vol.8, issue.4, p.355, 1978.
DOI : 10.1007/BF00116368

V. Richefeu, M. Sa¨?dsa¨?d-el-youssoufi, and F. Radja¨?radja¨?, Shear strength properties of wet granular materials, Physical Review E, vol.73, issue.5, p.51304, 2006.
DOI : 10.1103/PhysRevE.73.051304
URL : https://hal.archives-ouvertes.fr/hal-00022654