E. Ezugwu and Z. Wang, Titanium alloys and their machinability???a review, Journal of Materials Processing Technology, vol.68, issue.3, pp.262-274, 1997.
DOI : 10.1016/S0924-0136(96)00030-1

V. Wagner, Improvment of machinabiltiy of refractory titanium: the ti-5553, 2011.

P. Arrazola, A. Garaya, L. Iriartea, M. Armendiaa, S. Maryab et al., Machinability of titanium alloys (Ti6Al4V and Ti555.3), Journal of Materials Processing Technology, vol.209, issue.5, 2009.
DOI : 10.1016/j.jmatprotec.2008.06.020

URL : https://hal.archives-ouvertes.fr/hal-01002827

C. Machai and D. Biermann, Machining of ??-titanium-alloy Ti???10V???2Fe???3Al under cryogenic conditions: Cooling with carbon dioxide snow, Journal of Materials Processing Technology, vol.211, issue.6, pp.1175-1183, 2011.
DOI : 10.1016/j.jmatprotec.2011.01.022

P. Gilles, F. Monies, and W. Rubio, Optimum orientation of a torus milling cutter: Method to balance the transversal cutting force, International Journal of Machine Tools and Manufacture, vol.47, issue.15, pp.2263-2273, 2007.
DOI : 10.1016/j.ijmachtools.2007.06.003

F. Maitre, Relations entre ??nergies de coupe et endommagement des outils, Wear, vol.62, issue.1, pp.139-160, 1980.
DOI : 10.1016/0043-1648(80)90040-X

L. Deshayes, Analysis of an equivalent tool face for the cutting speed range prediction of complex grooved tools, Journal of Materials Processing Technology, vol.190, issue.1-3, pp.251-262, 2007.
DOI : 10.1016/j.jmatprotec.2007.02.037

V. Wagner, M. Baili, G. Dessein, and D. Lallement, Experimental study of coated carbide tools behaviour: application for Ti-5-5-5-3 turning, International Journal of Machining and Machinability of Materials, vol.9, issue.3/4, pp.233-248, 2011.
DOI : 10.1504/IJMMM.2011.039649

URL : https://hal.archives-ouvertes.fr/hal-00797746

M. Baili, V. Wagner, G. Dessein, J. Sallabery, and D. Lal, An Experimental Investigation of Hot Machining with Induction to Improve Ti-5553 Machinability, Applied Mechanics and Materials, vol.62, pp.67-76, 2011.
DOI : 10.4028/www.scientific.net/AMM.62.67

URL : https://hal.archives-ouvertes.fr/hal-00763682

M. Donachie, A technical guide, 2004.

N. Zlatin and M. Field, Procedures and Precautions in Machining Titanium Alloys, Titan Sci Technol, pp.489-504, 1973.
DOI : 10.1007/978-1-4757-1346-6_37

A. Moufki, A. Molinari, and D. Dudzinski, Modelling of orthogonal cutting with a temperature dependent friction law, Journal of the Mechanics and Physics of Solids, vol.46, issue.10, pp.2103-213810, 1998.
DOI : 10.1016/S0022-5096(98)00032-5

S. Padley and S. Deevi, Single layer and multilayer wear resistant coating of (ti,al)n: a review, Mater Sci Eng A, vol.342, issue.12, pp.58-79, 2003.

S. Ranganath, A. Campbell, and D. Gorkiewicz, A model to calibrate and predict forces in machining with honed cutting tools or inserts, Tehran International Congress on Manufacturing Engineering (TICME2005), pp.820-840, 2007.
DOI : 10.1016/j.ijmachtools.2006.06.019

P. Albrecht, New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting, Journal of Engineering for Industry, vol.82, issue.4, pp.348-358, 1960.
DOI : 10.1115/1.3664242

M. Kapoor, Microstructure-level force prediction model for micro-milling of multi-phase materials, ASME J Eng Ind, vol.125, issue.2, pp.205-209, 2003.

P. Oxley, Mechanics of Machining: An Analytical Approach to Assessing Machinability, Journal of Applied Mechanics, vol.57, issue.1, 1989.
DOI : 10.1115/1.2888318

H. Ren and Y. Altintas, Mechanics of Machining With Chamfered Tools, Journal of Manufacturing Science and Engineering, vol.122, issue.4, pp.650-659, 2000.
DOI : 10.1115/1.1286368

J. Manjunathaiah and W. Endres, A study of apparent negative rake angle and its effect on shear angle during orthogonal cutting with edge radiused tools, Transactions-North american manufacturgin research institution of, pp.197-202, 2000.

J. Barry and G. Byrne, The Mechanisms of Chip Formation in Machining Hardened Steels, Journal of Manufacturing Science and Engineering, vol.124, issue.3, pp.528-535, 2002.
DOI : 10.1115/1.1455643

R. Komanduri, V. Turkovich, and B. , New observations on the mechanism of chip formation when machining titanium alloys, Wear, vol.69, issue.2, pp.179-188, 1981.
DOI : 10.1016/0043-1648(81)90242-8

G. Poulachon and A. Moisan, A Contribution to the Study of the Cutting Mechanisms During High Speed Machining of Hardened Steel, CIRP Annals - Manufacturing Technology, vol.47, issue.1, pp.73-76, 1998.
DOI : 10.1016/S0007-8506(07)62788-7

W. Koning, Applied research on the machinability of titanium and its alloys, Proceedings of the institution of mechanical engineers part B: management and engineering manufacture, pp.53-60, 2005.

V. Corduan, T. Himbart, G. Poulachon, M. Dessoly, M. Lambertin et al., Wear Mechanisms of New Tool Materials for Ti-6AI-4V High Performance Machining, CIRP Annals - Manufacturing Technology, vol.52, issue.1, pp.73-76, 2003.
DOI : 10.1016/S0007-8506(07)60534-4

R. Freeman, T. Kitagawa, A. Kudo, and K. Maekawa, The machining of titanium and some of its alloys University of Birmingham, Birmingham 28 Temperature and wear of cutting tools in high speed machining of inconel 718 and ti-6al- 6v-2sn, Wear, vol.202, issue.2, pp.142-148, 1974.

E. Turkes, S. Orakes, S. Neselie, and S. Yaldiz, Linear analysis of chatter vibration and stability for orthogonal cutting in turning, International Journal of Refractory Metals and Hard Materials, vol.29, issue.2, pp.163-169, 2011.
DOI : 10.1016/j.ijrmhm.2010.10.002

Z. Palmai, Cutting temperature in intermittent cutting, International Journal of Machine Tools and Manufacture, vol.27, issue.2, pp.261-274, 1987.
DOI : 10.1016/S0890-6955(87)80055-X

D. Ferrasi, Metal cutting, 1972.

E. Trent and P. Wright, Metal cutting, 1986.