S. Bedi, S. Mann, and C. Menzel, Flank milling with flat end milling cutters, Computer-Aided Design, vol.35, issue.3, pp.293-300, 2003.
DOI : 10.1016/S0010-4485(01)00213-5
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.71.4275

C. Chu and J. Chen, Tool path planning for five-axis flank milling with developable surface approximation, The International Journal of Advanced Manufacturing Technology, vol.34, issue.7-8, pp.707-713, 2006.
DOI : 10.1007/s00170-005-2564-6

E. Duc, C. Lartigue, C. Tournier, and P. Bourdet, A New Concept for the Design and the Manufacturing of Free-Form Surfaces: The Machining Surface, CIRP Annals - Manufacturing Technology, vol.48, issue.1, pp.103-106, 1999.
DOI : 10.1016/S0007-8506(07)63141-2

G. Elber and R. Fish, 5-Axis Freeform Surface Milling Using Piecewise Ruled Surface Approximation, Journal of Manufacturing Science and Engineering, vol.119, issue.3, pp.383-387, 1997.
DOI : 10.1115/1.2831117

Z. Han, D. C. Yang, and J. Chuang, Isophote-based ruled surface approximation of free-form surfaces and its application in NC machining, International Journal of Production Research, vol.39, issue.9, pp.1911-1930, 2001.
DOI : 10.1080/00207540110024663

C. Lartigue, E. Duc, and A. Affouard, Tool path deformation in 5-axis flank milling using envelope surface, Computer-Aided Design, vol.35, issue.4, pp.375-382, 2003.
DOI : 10.1016/S0010-4485(02)00058-1

C. Lartigue, C. Tournier, M. Ritou, and D. Dumur, High-Performance NC for HSM by means of Polynomial Trajectories, CIRP Annals - Manufacturing Technology, vol.53, issue.1, pp.317-320, 2004.
DOI : 10.1016/S0007-8506(07)60706-9

S. Lavernhe, X. Duan, C. Tournier, and C. Lartigue, Performance of Off-Line Polynomial CNC Trajectories Within the Context of HSM, Manufacturing Engineering and Materials Handling Engineering, 2004.
DOI : 10.1115/IMECE2004-60900
URL : https://hal.archives-ouvertes.fr/hal-00577232

X. Liu, Five-axis NC cylindrical milling of sculptured surfaces, Computer-Aided Design, vol.27, issue.12, pp.887-894, 1995.
DOI : 10.1016/0010-4485(95)00005-4

C. Menzel, S. Bedi, and S. Mann, Triple tangent flank milling of ruled surfaces, Computer-Aided Design, vol.36, issue.3, pp.289-296, 2004.
DOI : 10.1016/S0010-4485(03)00118-0

F. Rehsteiner, Collision-Free Five-Axis Milling of Twisted Ruled Surfaces, CIRP Annals - Manufacturing Technology, vol.42, issue.1, pp.457-461, 1993.
DOI : 10.1016/S0007-8506(07)62485-8

W. Rubio, P. Lagarrigue, G. Dessin, and F. Pastor, Calculation of tool paths for a torus mill on free-form surfaces on five-axis machines with detection and elimination of interference, The International Journal of Advanced Manufacturing Technology, vol.20, issue.6, pp.13-20, 1998.
DOI : 10.1007/BF01179412

J. Senatore, F. Monies, J. Redonnet, and W. Rubio, Analysis of improved positioning in five-axis ruled surface milling using envelope surface, Computer-Aided Design, vol.37, issue.10, pp.989-998, 2005.
DOI : 10.1016/j.cad.2004.09.002

C. Tournier, C. Castagnetti, S. Lavernhe, and F. Avellan, Tool path generation and post-processor issues in five-axis high speed machining of hydro turbine blades, The 5th International Conference on High Speed Machining, pp.500-510, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00577235