F. Rehsteiner and H. Renker, Collision-Free Five-Axis Milling of Twisted Ruled Surfaces, CIRP Annals - Manufacturing Technology, vol.42, issue.1, pp.457-461, 1993.
DOI : 10.1016/S0007-8506(07)62485-8

W. Liu, Five-axis NC cylindrical milling of sculptured surfaces, Computer-Aided Design, vol.27, issue.12, pp.887-894, 1995.
DOI : 10.1016/0010-4485(95)00005-4

W. Rubio, P. Lagarrigue, G. Dessein, and F. Pastor, Calculation of tool paths for a torus mill on free-form surfaces on five-axis machines with detection and elimination of interference, The International Journal of Advanced Manufacturing Technology, vol.20, issue.6, pp.13-20, 1998.
DOI : 10.1007/BF01179412

J. Redonnet, W. Rubio, and G. Dessein, Side milling of ruled surfaces: Optimum positioning of the milling cutter and calculation of interference, The International Journal of Advanced Manufacturing Technology, vol.119, issue.3, pp.459-465, 1998.
DOI : 10.1007/BF01351391
URL : https://hal.archives-ouvertes.fr/hal-01017618

F. Monies, J. Redonnet, W. Rubio, and P. Lagarrigue, Improved positioning of a conical mill for machining ruled surfaces: application to turbine blades, Proceedings of the Institution of Mechanical Engineers, pp.625-634, 2000.
DOI : 10.1243/0954405001518323

J. Senatore, F. Monies, J. Redonnet, and W. Rubio, Improved positioning for side milling of ruled surfaces: Analysis of the rotation axis's influence on machining error, International Journal of Machine Tools and Manufacture, vol.47, issue.6, pp.934-945, 2007.
DOI : 10.1016/j.ijmachtools.2006.07.008

S. Bedi, S. Mann, and C. Menzel, Flank milling with flat end milling cutters, Computer-Aided Design, vol.35, issue.3, pp.293-300, 2003.
DOI : 10.1016/S0010-4485(01)00213-5

C. Menzel, S. Bedi, and S. Mann, Triple tangent flank milling of ruled surfaces, Computer-Aided Design, vol.36, issue.3, pp.389-296, 2004.
DOI : 10.1016/S0010-4485(03)00118-0

J. Chiou, Accurate tool position for five-axis ruled surface machining by swept envelope approach, Computer-Aided Design, vol.36, issue.10, pp.967-974, 2004.
DOI : 10.1016/j.cad.2003.10.001

H. Gong, L. Cao, and J. Liu, Improved positioning of cylindrical cutter for flank milling ruled surfaces, Computer-Aided Design, vol.37, issue.12, pp.1205-1213, 2005.
DOI : 10.1016/j.cad.2004.11.006

P. Wu, Y. Li, and C. Chu, Optimized tool path generation based on dynamic programming for five-axis flank milling of rule surface, International Journal of Machine Tools and Manufacture, vol.48, issue.11, pp.1224-1233, 2008.
DOI : 10.1016/j.ijmachtools.2008.03.009

S. Lavernhe, C. Tournier, and C. Lartigue, Kinematical performance prediction in multi-axis machining for process planning optimization, The International Journal of Advanced Manufacturing Technology, vol.53, issue.1, pp.5-6, 2008.
DOI : 10.1007/s00170-007-1001-4
URL : https://hal.archives-ouvertes.fr/hal-00373706

C. Lavenrhe, C. Tournier, and . Lartigue, Optimization of 5-axis high-speed machining using a surface based approach, Computer-Aided Design, vol.40, pp.1015-1023, 2008.

M. Ho, Y. Hwang, and C. Hu, Five-axis tool orientation smoothing using quaternion interpolation algorithm, International Journal of Machine Tools and Manufacture, vol.43, issue.12, pp.1259-1267, 2003.
DOI : 10.1016/S0890-6955(03)00107-X

C. Castagnetti, E. Duc, and P. Ray, The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation, Computer-Aided Design, vol.40, issue.9
DOI : 10.1016/j.cad.2008.07.002

E. Duc, C. Lartigue, C. Tournier, and P. Bourdet, A New Concept for the Design and the Manufacturing of Free-Form Surfaces: The Machining Surface, CIRP Annals - Manufacturing Technology, vol.48, issue.1, pp.103-106, 1999.
DOI : 10.1016/S0007-8506(07)63141-2

A. Affouard, E. Duc, C. Lartigue, J. Langeron, and P. Bourdet, Avoiding 5-axis singularities using tool path deformation, International Journal of Machine Tools and Manufacture, vol.44, issue.4, p.415, 2004.
DOI : 10.1016/j.ijmachtools.2003.10.008

C. Lartigue, E. Duc, and A. Affouard, Tool path deformation in 5-axis flank milling using envelope surface, Computer-Aided Design, vol.35, issue.4, pp.375-382, 2003.
DOI : 10.1016/S0010-4485(02)00058-1

P. Pechard, C. Tournier, C. Lartigue, and J. Lugarini, Introducing minimum energy tool path in 5-axis flank milling, 3rd CIRP International Conference High Performance Cutting, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01097743

L. Piegl and W. Tiller, The Nurbs Book : Second Edition, 1997.

C. Li, S. Mann, and S. Bedi, Error measurements for flank milling, Computer-Aided Design, vol.37, issue.14, pp.1459-1468, 2005.
DOI : 10.1016/j.cad.2005.02.014

A. Dugas, J. Lee, and J. Hascoet, An enhanced machining simulator with tool deflection error analysis, Journal of Manufacturing Systems, vol.21, issue.6, pp.451-564, 2003.
DOI : 10.1016/S0278-6125(02)80051-6

X. Wang, F. Cheng, and B. Barsky, Energy and B-spline interproximation, Computer-Aided Design, vol.29, issue.7, pp.485-496, 1997.
DOI : 10.1016/S0010-4485(96)00087-5