L. Wang, S. Keshavarzmanesh, H. Feng, and R. Buchal, Assembly process planning and its future in collaborative manufacturing: a review, The International Journal of Advanced Manufacturing Technology, vol.68, issue.15, pp.132-144, 2009.
DOI : 10.1007/s00170-008-1458-9

A. Bourjault, Contribution a une approche methodologique de l'assemblage automatisé: Elaboration automatique des sequences operatoires, 1984.

T. De-fazio and D. Whitney, Simplified generation of all mechanical assembly sequences, IEEE Journal on Robotics and Automation, vol.3, issue.6, pp.640-658, 1987.
DOI : 10.1109/JRA.1987.1087132

G. Dini, F. Failli, B. Lazzerini, and F. Marcelloni, Generation of Optimized Assembly Sequences Using Genetic Algorithms, CIRP Annals - Manufacturing Technology, vol.48, issue.1, pp.17-20, 1999.
DOI : 10.1016/S0007-8506(07)63122-9

J. Latombe, R. Wilson, and F. Gazals, Assembly sequencing with toleranced parts, Computer-Aided Design, vol.29, issue.2, pp.159-174, 1997.
DOI : 10.1016/S0010-4485(96)00044-9

R. M. Marian, L. H. Luong, and K. Abhary, Assembly sequence planning and optimisation using genetic algorithms, Applied Soft Computing, vol.2, issue.3, pp.223-253, 2003.
DOI : 10.1016/S1568-4946(02)00064-9

R. B. Gottipolu and K. Ghosh, A simplified and efficient representation for evaluation and selection of assembly sequences, Computers in Industry, vol.50, issue.3, pp.251-26410, 2003.
DOI : 10.1016/S0166-3615(03)00015-0

L. Homem-de-mello and A. Sanderson, A correct and complete algorithm for the generation of mechanical assembly sequences, IEEE Transactions on Robotics and Automation, vol.7, issue.2, pp.228-240, 1991.
DOI : 10.1109/70.75905

R. Mantripragada and D. Whitney, The Datum Flow Chain: A systematic approach to assembly design and modeling, Research in Engineering Design, vol.65, issue.2, pp.150-165, 1998.
DOI : 10.1007/BF01607157

T. Cao and A. Sanderson, Task decomposition and analysis of robotic assembly task plans using petri nets, Industrial Electronics, IEEE Transactions on Robotics and Automation, vol.41, issue.6, pp.620-630, 1994.

C. Becker and A. Scholl, A survey on problems and methods in generalized assembly line balancing, European Journal of Operational Research, vol.168, issue.3, pp.694-715, 2006.
DOI : 10.1016/j.ejor.2004.07.023

T. A. Abdullah, K. Popplewell, and C. J. Page, A review of the support tools for the process of assembly method selection and assembly planning, International Journal of Production Research, vol.41, issue.11, pp.2391-2410, 2003.
DOI : 10.1080/002075431000087265

J. Camelio, S. J. Hu, and D. Ceglarek, Modeling Variation Propagation of Multi-Station Assembly Systems With Compliant Parts, Journal of Mechanical Design, vol.125, issue.4, pp.673-681, 2003.
DOI : 10.1115/1.1631574

M. Mounaud, F. Thiébaut, P. Bourdet, H. Falgarone, and N. Chevassus, Assembly sequence influence on geometric deviations propagation of compliant parts, International Journal of Production Research, vol.49, issue.4
DOI : 10.1080/00207540802178091

K. Chase, W. Greenwood, B. Loosli, and L. Hauglund, Least cost tolerance allocation for mechanical assemblies with automated process selection, Manufacturing Review, vol.3, issue.1, pp.49-59, 1990.

P. Adragna, M. Pillet, F. Formosa, and S. Samper, Inertial tolerancing and capability indices in an assembly production, Revue internationale d'ingénierie numérique, pp.71-88, 2006.

Y. Ding, J. Jin, D. Ceglarek, and J. Shi, Process-oriented tolerancing for multi-station assembly systems, IIE Transactions, vol.1, issue.6, pp.493-508, 2005.
DOI : 10.1080/00207549608905095

W. Huang, T. Phoomboplab, and D. Ceglarek, Process capability surrogate model-based tolerance synthesis for multi-station manufacturing systems, IIE Transactions, vol.1, issue.4, pp.309-322, 2009.
DOI : 10.1007/BF01749907

B. Marguet, ContributionàContribution`Contributionà l'analyse des variations géométriques dans les ensembles structuraux en aéronautique: Démarche et outils, 2001.

A. Ballu and L. Mathieu, Choice of functional specifications using graphs within the framework of education, pp.197-206, 1999.
DOI : 10.1007/978-94-017-1705-2_20

H. Falgarone and N. Chevassus, An innovative design method and tool for structural and functional analysis, Proceedings of CIRP Design Seminar, 2004.

F. Edgeworth, Mathematical physics; an essay on the application of mathematics to the moral sciences, p.1881

V. Pareto, Cours d'´ economie politique, p.1896

S. Liu and S. J. Hu, A parametric study of joint performance in sheet metal assembly, International Journal of Machine Tools and Manufacture, vol.37, issue.6, pp.873-884, 1997.
DOI : 10.1016/S0890-6955(95)00090-9

L. Andolfatto, F. Thiébaut, M. Douilly, and C. Lartigue, On neural network's ability to approximate the geometrical variation propagation in assembly, 12th CIRP Conference on Computer-Aided Tolerancing CAT2012, 2012.

W. Tan and B. Khoshnevis, Integration of process planning and scheduling a review, Journal of Intelligent Manufacturing, vol.11, issue.1, pp.51-63, 2000.
DOI : 10.1023/A:1008952024606

C. A. Coello, Recent Trends in Evolutionary Multiobjective Optimization, Evolutionary Multiobjective Optimization, Advanced Information and Knowledge Processing, pp.7-32, 2005.
DOI : 10.1007/1-84628-137-7_2

M. Reyes-sierra and C. A. Coello, Multi-objective particle swarm optimizers: A survey of the state-of-the-art, International Journal Of Computationnal Intelligence Research, vol.2, issue.3, pp.287-308, 2006.

K. Deb, S. Agrawal, A. Pratap, T. Meyarivan, K. Deb et al., A Fast Elitist Nondominated Sorting Genetic Algorithm for Multi-objective Optimization: NSGA-II, Parallel Problem Solving from Nature PPSN VI, pp.849-858, 2000.
DOI : 10.1007/3-540-45356-3_83
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.18.4257