S. Ahzi, A. Makradi, R. V. Gregory, and D. D. Edie, Modeling of deformation behavior and strain-induced crystallization in poly(ethylene terephthalate) above the glass transition temperature, Mechanics of Materials, vol.35, issue.12, pp.1139-1148, 2003.
DOI : 10.1016/S0167-6636(03)00004-8

N. M. Ames, V. Srivastava, S. A. Chester, and L. Anand, A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: Applications, International Journal of Plasticity, vol.25, issue.8, pp.1495-1539, 2009.
DOI : 10.1016/j.ijplas.2008.11.005

L. Anand and M. E. Gurtin, A theory of amorphous solids undergoing large deformations, with application to polymeric glasses, International Journal of Solids and Structures, vol.40, issue.6, pp.1465-1487, 2003.
DOI : 10.1016/S0020-7683(02)00651-0

L. Anand and N. M. Ames, On modeling the micro-indentation response of an amorphous polymer, International Journal of Plasticity, vol.22, issue.6, pp.1123-1170, 2006.
DOI : 10.1016/j.ijplas.2005.07.006

L. Anand, N. M. Ames, V. Srivastava, and S. A. Chester, A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation, International Journal of Plasticity, vol.25, issue.8, pp.1474-1494, 2009.
DOI : 10.1016/j.ijplas.2008.11.004

R. D. Andrews and A. V. Tobolsky, Elastoviscous properties of polyisobutylene. IV. Relaxation time spectrum and calculation of bulk viscosity, Journal of Polymer Science, vol.7, issue.23, pp.221-242, 1952.
DOI : 10.1002/pol.1951.120070210

A. S. Argon, A theory for the low-temperature plastic deformation of glassy polymers, Philosophical Magazine, vol.10, issue.4, 1973.
DOI : 10.1002/pol.1959.1203512829

E. M. Arruda and M. C. Boyce, A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials, Journal of the Mechanics and Physics of Solids, vol.41, issue.2, pp.389-412, 1993.
DOI : 10.1016/0022-5096(93)90013-6
URL : https://hal.archives-ouvertes.fr/hal-01390807

E. M. Arruda, M. C. Boyce, and R. Jayachandran, Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers, Mechanics of Materials, vol.19, issue.2-3, pp.193-212, 1995.
DOI : 10.1016/0167-6636(94)00034-E

G. Ayoub, F. Zaïri, M. Naït-abdelaziz, and J. M. Gloaguen, Modelling large deformation behaviour under loading???unloading of semicrystalline polymers: Application to a high density polyethylene, International Journal of Plasticity, vol.26, issue.3, pp.26-329, 2010.
DOI : 10.1016/j.ijplas.2009.07.005
URL : https://hal.archives-ouvertes.fr/hal-00461482

G. Ayoub, F. Zaïri, C. Fréderix, J. M. Gloaguen, M. Naït-abdelaziz et al., Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling, International Journal of Plasticity, vol.27, issue.4, pp.492-511, 2011.
DOI : 10.1016/j.ijplas.2010.07.005
URL : https://hal.archives-ouvertes.fr/hal-00574734

R. Ball, M. Doi, S. Edwards, and M. Warner, Elasticity of entangled networks, Polymer, vol.22, issue.8, pp.1010-1018, 1981.
DOI : 10.1016/0032-3861(81)90284-6

S. G. Bardenhagen, M. G. Stout, and G. Gray, Three-dimensional, finite deformation, viscoplastic constitutive models for polymeric materials, Mechanics of Materials, vol.25, issue.4, pp.235-253, 1997.
DOI : 10.1016/S0167-6636(97)00007-0

J. C. Bauwens, C. Bauwens-crowet, and G. Homes, Tensile yield-stress behavior of poly(vinyl chloride) and polycarbonate in the glass transition region, Journal of Polymer Science Part A-2: Polymer Physics, vol.7, issue.10, pp.1745-1754, 1969.
DOI : 10.1002/pol.1969.160071010

C. Bauwens-crowet, The compression yield behaviour of polymethyl methacrylate over a wide range of temperatures and strain-rates, Journal of Materials Science, vol.281, issue.7, pp.968-979, 1973.
DOI : 10.1007/BF00756628

F. Bédoui, J. Diani, G. Régnier, and W. Seiler, Micromechanical modeling of isotropic elastic behavior of semicrystalline polymers, Acta Materialia, vol.54, issue.6, pp.1513-1523, 2006.
DOI : 10.1016/j.actamat.2005.11.028

S. Belbachir, F. Zaïri, G. Ayoub, U. Maschke, M. Naït-abdelaziz et al., Modelling of photodegradation effect on elastic???viscoplastic behaviour of amorphous polylactic acid films, Journal of the Mechanics and Physics of Solids, vol.58, issue.2, pp.241-255, 2010.
DOI : 10.1016/j.jmps.2009.10.003
URL : https://hal.archives-ouvertes.fr/hal-00447104

N. Billon, New constitutive modelling for time-dependent mechanical behaviour of polymers close to glass transition: fundamental and experimental validation, J. App. Polym, 2012.

J. L. Bouvard, D. K. Ward, D. Hossain, S. Nouranian, E. B. Marin et al., Review of Hierarchical Multiscale Modeling to Describe the Mechanical Behavior of Amorphous Polymers, Journal of Engineering Materials and Technology, vol.131, issue.4, p.41206, 2009.
DOI : 10.1115/1.3183779

J. L. Bouvard, D. K. Ward, D. Hossain, E. B. Marin, D. J. Bammann et al., A general inelastic internal state variable model for amorphous glassy polymers, Acta Mechanica, vol.41, issue.1-2, pp.71-96, 2010.
DOI : 10.1007/s00707-010-0349-y

J. L. Bouvard, D. K. Francis, M. A. Tschopp, E. B. Marin, D. J. Bammann et al., An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation, International Journal of Plasticity, vol.42, pp.168-193, 2013.
DOI : 10.1016/j.ijplas.2012.10.005
URL : https://hal.archives-ouvertes.fr/hal-00767846

M. C. Boyce, D. M. Parks, and A. S. Argon, Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model, Mechanics of Materials, vol.7, issue.1, pp.15-33, 1988.
DOI : 10.1016/0167-6636(88)90003-8

M. C. Boyce, S. Socrate, and P. G. Llana, Constitutive model for the finite deformation stress???strain behavior of poly(ethylene terephthalate) above the glass transition, Polymer, vol.41, issue.6, pp.2183-2201, 2000.
DOI : 10.1016/S0032-3861(99)00406-1

C. P. Buckley and D. C. Jones, Glass-rubber constitutive model for amorphous polymers near the glass transition, Polymer, vol.36, issue.17, pp.3301-3312, 1995.
DOI : 10.1016/0032-3861(95)99429-X

H. Cayzac, K. Saï, and L. Laiarinandrasana, Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model, International Journal of Plasticity, vol.51, pp.47-64, 2013.
DOI : 10.1016/j.ijplas.2013.06.008
URL : https://hal.archives-ouvertes.fr/hal-00905508

J. Chaboche, Thermodynamic formulation of constitutive equations and application to the viscoplasticity and viscoelasticity of metals and polymers, International Journal of Solids and Structures, vol.34, issue.18, pp.2239-2254, 1997.
DOI : 10.1016/S0020-7683(96)00162-X

O. Colak, Modeling deformation behavior of polymers with viscoplasticity theory based on overstress, International Journal of Plasticity, vol.21, issue.1, pp.145-160, 2005.
DOI : 10.1016/j.ijplas.2004.04.004

O. Colak and E. Krempl, Modeling of the monotonic and cyclic Swift effects using an isotropic, finite viscoplasticity theory based on overstress (FVBO), International Journal of Plasticity, vol.21, issue.3, pp.573-588, 2005.
DOI : 10.1016/j.ijplas.2004.04.010

A. D. Drozdov, Mullins??? effect in semicrystalline polymers, International Journal of Solids and Structures, vol.46, issue.18-19, pp.3336-3345, 2009.
DOI : 10.1016/j.ijsolstr.2009.05.001

R. B. Dupaix and D. Krishnan, A Constitutive Model for Strain-Induced Crystallization in Poly(ethylene terephthalate) (PET) during Finite Strain Load-Hold Simulations, Journal of Engineering Materials and Technology, vol.128, issue.1, 2006.
DOI : 10.1115/1.1924564

N. Dusunceli and O. U. Colak, Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers, International Journal of Plasticity, vol.24, issue.7, pp.1224-1242, 2008.
DOI : 10.1016/j.ijplas.2007.09.003

S. F. Edwards and T. Vilgis, The effect of entanglements in rubber elasticity, Polymer, vol.27, issue.4, pp.483-492, 1986.
DOI : 10.1016/0032-3861(86)90231-4

H. Eyring, Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates, The Journal of Chemical Physics, vol.4, issue.4, 1936.
DOI : 10.1063/1.1749836

E. Ghorbel, A viscoplastic constitutive model for polymeric materials, International Journal of Plasticity, vol.24, issue.11, pp.2032-2058, 2008.
DOI : 10.1016/j.ijplas.2008.01.003

E. Gorlier, J. M. Haudin, and N. Billon, Strain-induced crystallisation in bulk amorphous PET under uni-axial loading, Polymer, vol.42, issue.23, pp.9541-9549, 2001.
DOI : 10.1016/S0032-3861(01)00497-9
URL : https://hal.archives-ouvertes.fr/hal-00536370

L. E. Govaert, P. H. Timmermans, and W. A. Brekelmans, The Influence of Intrinsic Strain Softening on Strain Localization in Polycarbonate: Modeling and Experimental Validation, Journal of Engineering Materials and Technology, vol.122, issue.2, 2000.
DOI : 10.1115/1.482784

G. Sell, C. , and J. J. , Determination of the plastic behaviour of solid polymers at constant true strain rate, Journal of Materials Science, vol.15, issue.6, pp.583-591, 1979.
DOI : 10.1007/BF00772717

G. 'sell, C. Hiver, J. M. Dahoun, and A. , Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking, International Journal of Solids and Structures, vol.39, issue.13-14, pp.3857-3872, 2002.
DOI : 10.1016/S0020-7683(02)00184-1

O. Gueguen, J. Richeton, S. Ahzi, and A. Makradi, Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers, Acta Materialia, vol.56, issue.7, pp.1650-1655, 2008.
DOI : 10.1016/j.actamat.2007.12.015
URL : https://hal.archives-ouvertes.fr/hal-00321594

M. F. Horstemeyer and D. J. Bammann, Historical review of internal state variable theory for inelasticity, International Journal of Plasticity, vol.26, issue.9, pp.1310-1334, 2010.
DOI : 10.1016/j.ijplas.2010.06.005

M. A. Kennedy, A. J. Peacock, and L. Mandelkern, Tensile Properties of Crystalline Polymers: Linear Polyethylene, Macromolecules, vol.27, issue.19, pp.5297-5310, 1994.
DOI : 10.1021/ma00097a009

A. Khan and H. Zhang, Finite deformation of a polymer: experiments and modeling, International Journal of Plasticity, vol.17, issue.9, 2001.
DOI : 10.1016/S0749-6419(00)00073-5

A. Khan, O. Lopez-pamies, and R. Kazmi, Thermo-mechanical large deformation response and constitutive modeling of viscoelastic polymers over a wide range of strain rates and temperatures, International Journal of Plasticity, vol.22, issue.4, pp.581-601, 2006.
DOI : 10.1016/j.ijplas.2005.08.001

F. Khan and C. Yeakle, Experimental investigation and modeling of non-monotonic creep behavior in polymers, International Journal of Plasticity, vol.27, issue.4, pp.512-521, 2011.
DOI : 10.1016/j.ijplas.2010.06.007

E. Krempl and K. Ho, Extension of the viscoplasticity theory based on overstress (VBO) to capture non-standard rate dependence in solids, Int. J. Plast, vol.18, pp.851-872, 2002.

E. Krempl and F. Khan, Rate (time)-dependent deformation behavior: an overview of some properties of metals and solid polymers, International Journal of Plasticity, vol.19, issue.7, pp.1069-1095, 2003.
DOI : 10.1016/S0749-6419(03)00002-0

D. Lai, I. Yakimets, and M. Guignon, A non linear viscoelastic model developed for semicrystalline polymer deformed at small strains with loading and unloading paths, Mat. Sci, 2005.

B. J. Lee, D. M. Parks, and S. Ahzi, Micromechanical modeling of large plastic deformation and texture evolution in semi-crystalline polymers, Journal of the Mechanics and Physics of Solids, vol.41, issue.10, pp.1651-1687, 1993.
DOI : 10.1016/0022-5096(93)90018-B

B. J. Lee, A. S. Argon, D. M. Parks, S. Ahzi, and Z. Bartczak, Simulation of large strain plastic deformation and texture evolution in high density polyethylene, Polymer, vol.34, issue.17, pp.3555-3575, 1993.
DOI : 10.1016/0032-3861(93)90039-D

S. Y. Lee, D. C. Bassett, and R. H. Olley, Lamellar deformation and its variation in drawn isolated polyethylene spherulites, Polymer, vol.44, issue.19, pp.5961-5967, 2003.
DOI : 10.1016/S0032-3861(03)00545-7

G. Li and A. Shojaei, A viscoplastic theory of shape memory polymer fibres with application to self-healing materials, Proc. R. Soc. A: Math, pp.2319-2346, 2012.
DOI : 10.1106/YEIH-QUDH-FC7W-4QFM

A. Makradi, S. Ahzi, R. V. Gregory, and D. D. Edie, A two-phase self-consistent model for the deformation and phase transformation behavior of polymers above the glass transition temperature: application to PET, International Journal of Plasticity, vol.21, issue.4, pp.741-758, 2005.
DOI : 10.1016/j.ijplas.2004.04.012

Y. Marco, L. Chevalier, and M. Chaouche, WAXD study of induced crystallization and orientation in poly(ethylene terephthalate) during biaxial elongation, Polymer, vol.43, issue.24, pp.6569-6574
DOI : 10.1016/S0032-3861(02)00488-3

A. Maurel-pantel, E. Baquet, J. Bikard, and N. Billon, Coupled Thermo Mechanical Characterisation of Polymers Based on Inverse Analyses and IR Measurements, Applied Mechanics and Materials, vol.70, 2011.
DOI : 10.4028/www.scientific.net/AMM.70.393
URL : https://hal.archives-ouvertes.fr/hal-00842058

B. Meissner and L. Matejka, Comparison of recent rubber-elasticity theories with biaxial stress???strain data: the slip-link theory of Edwards and Vilgis, Polymer, vol.43, issue.13, pp.3803-3809, 2002.
DOI : 10.1016/S0032-3861(02)00150-7

C. Miehe, S. Goktepe, and J. Mendez-diez, Finite viscoplasticity of amorphous glassy polymers in the logarithmic strain space, International Journal of Solids and Structures, vol.46, issue.1, pp.181-202, 2009.
DOI : 10.1016/j.ijsolstr.2008.08.029

S. Moreau, A. Chrysochoos, J. Muracciole, and B. Wattrisse, Analysis of thermoelastic effects accompanying the deformation of PMMA and PC polymers, Comptes Rendus M??canique, vol.333, issue.8, pp.648-653, 2005.
DOI : 10.1016/j.crme.2005.06.007
URL : https://hal.archives-ouvertes.fr/hal-00008145

S. Nikolov and I. Doghri, A micro/macro constitutive model for the small-deformation behavior of polyethylene, Polymer, vol.41, issue.5, pp.1883-1891, 2000.
DOI : 10.1016/S0032-3861(99)00330-4

S. Nikolov, I. Doghri, O. Pierard, L. Zealouk, and A. Goldberg, Multi-scale constitutive modeling of the small deformations of semi-crystalline polymers, Journal of the Mechanics and Physics of Solids, vol.50, issue.11, pp.2275-2302, 2002.
DOI : 10.1016/S0022-5096(02)00036-4

F. Pierron and A. Vautrin, Measurement of the in-plane shear strengths of unidirectional composites with the Iosipescu test, Composites Science and Technology, vol.57, issue.12, pp.1653-1660, 1997.
DOI : 10.1016/S0266-3538(97)00099-7

M. Ponçot, F. Addiego, and A. Dahoun, True intrinsic mechanical behaviour of semicrystalline and amorphous polymers : influences of volume deformation and cavities shape, 2013.

M. Pyrz and F. Zaïri, Identification of viscoplastic parameters of phenomenological constitutive equations for polymers by deterministic and evolutionary approach, Modelling and Simulation in Materials Science and Engineering, vol.15, issue.2, 2007.
DOI : 10.1088/0965-0393/15/2/006
URL : https://hal.archives-ouvertes.fr/hal-00192344

C. Regrain, L. Laiarinandrasana, S. Toillon, and K. Saï, Multi-mechanism models for semi-crystalline polymer: Constitutive relations and finite element implementation, International Journal of Plasticity, vol.25, issue.7, 2009.
DOI : 10.1016/j.ijplas.2008.09.010
URL : https://hal.archives-ouvertes.fr/hal-00390737

J. Richeton, S. Ahzi, K. S. Vecchio, F. C. Jiang, and A. Makradi, Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates, International Journal of Solids and Structures, vol.44, issue.24, pp.7938-7954, 2007.
DOI : 10.1016/j.ijsolstr.2007.05.018
URL : https://hal.archives-ouvertes.fr/hal-00322014

R. E. Robertson, Theory for the Plasticity of Glassy Polymers, The Journal of Chemical Physics, vol.44, issue.10, pp.3950-3956, 1966.
DOI : 10.1063/1.1726558

E. Roguet, S. Castagnet, and J. Grandidier, Mechanical features of the rubbery amorphous phase in tension and torsion in a semi-crystalline polymer, Mechanics of Materials, vol.39, issue.4, pp.380-391, 2007.
DOI : 10.1016/j.mechmat.2006.06.003

E. Roux and P. Bouchard, Kriging metamodel global optimization of clinching joining processes accounting for ductile damage, Journal of Materials Processing Technology, vol.213, issue.7, pp.1038-1047, 2013.
DOI : 10.1016/j.jmatprotec.2013.01.018
URL : https://hal.archives-ouvertes.fr/hal-00805670

A. Rozanski and A. Galeski, Plastic yielding of semicrystalline polymers affected by amorphous phase, International Journal of Plasticity, vol.41, pp.14-29, 2013.
DOI : 10.1016/j.ijplas.2012.07.008

A. Shojaei, G. Li, and G. Z. Voyiadjis, Cyclic Viscoplastic-Viscodamage Analysis of Shape Memory Polymers Fibers With Application to Self-Healing Smart Materials, Journal of Applied Mechanics, vol.80, issue.1, pp.11-14, 2013.
DOI : 10.1115/1.4007140

V. Srivastava, S. A. Chester, N. M. Ames, and L. Anand, A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition, International Journal of Plasticity, vol.26, issue.8, pp.1138-1182, 2010.
DOI : 10.1016/j.ijplas.2010.01.004

V. Srivastava, S. A. Chester, A. , and L. , Thermally actuated shape-memory polymers: Experiments, theory, and numerical simulations, Journal of the Mechanics and Physics of Solids, vol.58, issue.8, pp.1100-1124, 2010.
DOI : 10.1016/j.jmps.2010.04.004

J. Sweeney and I. M. Ward, Rate dependent and network phenomena in the multiaxial drawing of poly(vinyl chloride), Polymer, vol.36, issue.2, pp.299-308, 1995.
DOI : 10.1016/0032-3861(95)91317-Z

J. Sweeney and I. M. Ward, A constitutive law for large deformations of polymers at high temperatures, Journal of the Mechanics and Physics of Solids, vol.44, issue.7, pp.44-51, 1996.
DOI : 10.1016/0022-5096(96)00033-6

J. Sweeney, T. Collins, P. Coates, and I. Ward, Application of an elastic model to the large deformation, high temperature stretching of polypropylene, Polymer, vol.38, issue.24, pp.5991-5999, 1997.
DOI : 10.1016/S0032-3861(97)00159-6

J. Sweeney, T. Collins, P. Coates, A. Unwin, R. Duckett et al., Application of a large deformation model to unstable tensile stretching of polyethylene, International Journal of Plasticity, vol.18, issue.3, pp.399-414, 2002.
DOI : 10.1016/S0749-6419(00)00104-2

Y. Tomita, Constitutive modelling of deformation behavior of glassy polymers and applications, International Journal of Mechanical Sciences, vol.42, issue.8, pp.1455-1469, 2000.
DOI : 10.1016/S0020-7403(99)00085-5

M. Uchida and N. Tada, Micro-, meso- to macroscopic modeling of deformation behavior of semi-crystalline polymer, International Journal of Plasticity, vol.49, pp.164-184, 2013.
DOI : 10.1016/j.ijplas.2013.03.007

K. Urayama, K. Yokoyama, and S. Kohjiya, Viscoelastic Relaxation of Guest Linear Poly(dimethylsiloxane) in End-Linked Poly(dimethylsiloxane) Networks, Macromolecules, vol.34, issue.13, pp.4513-4518, 2001.
DOI : 10.1021/ma010167s

D. Valentin, F. Paray, and B. Guetta, The hygrothermal behaviour of glass fibre reinforced Pa66 composites: A study of the effect of water absorption on their mechanical properties, Journal of Materials Science, vol.6, issue.1, pp.46-56, 1987.
DOI : 10.1007/BF01160550

J. A. Van-dommelen, D. M. Parks, M. C. Boyce, W. A. Brekelmans, and F. P. Baaijens, Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers, Journal of the Mechanics and Physics of Solids, vol.51, issue.3, pp.519-541, 2003.
DOI : 10.1016/S0022-5096(02)00063-7

J. Verdu, Action de l'eau sur les plastiques, pp.1-8, 2000.

G. Z. Voyiadjis, A. Shojaei, and G. Li, A generalized coupled viscoplastic???viscodamage???viscohealing theory for glassy polymers, International Journal of Plasticity, vol.28, issue.1, pp.21-45, 2012.
DOI : 10.1016/j.ijplas.2011.05.012

P. D. Wu and E. Van-der-giessen, On improved network models for rubber elasticity and their applications to orientation hardening in glassy polymers, Journal of the Mechanics and Physics of Solids, vol.41, issue.3, pp.427-456, 1993.
DOI : 10.1016/0022-5096(93)90043-F

P. D. Wu and E. Van-der-giessen, On neck propagation in amorphous glassy polymers under plane strain tension, International Journal of Plasticity, vol.11, issue.3, pp.211-235, 1995.
DOI : 10.1016/0749-6419(94)00043-3

F. Zaïri, K. Woznica, and M. Naït-abdelaziz, Phenomenological nonlinear modelling of glassy polymers, Comptes Rendus M??canique, vol.333, issue.4, pp.359-364, 2005.
DOI : 10.1016/j.crme.2005.02.003

F. Zaïri, M. Naït-abdelaziz, K. Woznica, and J. M. Gloaguen, Constitutive equations for the viscoplastic-damage behaviour of a rubber-modified polymer, European Journal of Mechanics - A/Solids, vol.24, issue.1, pp.169-182, 2005.
DOI : 10.1016/j.euromechsol.2004.11.003

F. Zaïri, M. Naït-abdelaziz, K. Woznica, and J. M. Gloaguen, Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate, Journal of Engineering Materials and Technology, vol.129, issue.1, 2007.
DOI : 10.1115/1.2400256

F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, and J. M. Lefebvre, Modelling of the elasto-viscoplastic damage behaviour of glassy polymers, International Journal of Plasticity, vol.24, issue.6, pp.945-965, 2008.
DOI : 10.1016/j.ijplas.2007.08.001

F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, and J. M. Lefebvre, Constitutive modelling of the large inelastic deformation behaviour of rubber-toughened poly(methyl methacrylate): effects of strain rate, temperature and rubber-phase volume fraction, Modelling and Simulation in Materials Science and Engineering, vol.18, issue.5, pp.1-22, 2010.
DOI : 10.1088/0965-0393/18/5/055004