Deformation at ambient and high temperature of in situ Laves phases-ferrite composites.

P. Donnadieu (1) , C. Pohlmann (2) , S. Scudino (2) , J.J. Blandin (1) , K.B. Surreddi (2) , J. Eckert (2)

1 SIMaP - Science et Ingénierie des Matériaux et Procédés
2 Institute for Complex Materials [Dresden]

The mechanical behavior of a Fe80Zr10Cr10 alloy has been studied at ambient and high temperature. This Fe80Zr10Cr10 alloy, whoose microstructure is formed by alternate lamellae of Laves phase and ferrite, constitutes a very simple example of an in situ CMA phase composite. The role of the Laves phase type was investigated in a previous study while the present work focuses on the influence of the microstructure length scale owing to a series of alloys cast at different cooling rates that display microstructures with Laves phase lamellae width ranging from similar to 50 nm to similar to 150 nm. Room temperature compression tests have revealed a very high strength (up to 2 GPa) combined with a very high ductility (up to 35%). Both strength and ductility increase with reduction of the lamella width. High temperature compression tests have shown that a high strength (900 MPa) is maintained up to 873 K. Microstructural study of the deformed samples suggests that the confinement of dislocations in the ferrite lamellae is responsible for strengthening at both ambient and high temperature. The microstructure scale in addition to CMA phase structural features stands then as a key parameter for optimization of mechanical properties of CMA in situ composites.

Domaines: Matériaux

P. Donnadieu, C. Pohlmann, S. Scudino, J.J. Blandin, K.B. Surreddi, et al.. Deformation at ambient and high temperature of in situ Laves phases-ferrite composites.. Science and Technology of Advanced Materials, 2014, 15 (3), pp.8. ⟨10.1088/1468-6996/15/3/034801⟩. ⟨hal-01073496⟩