A. Helleno and K. Schutzer, Investigation of tool path interpolation on the manufacturing of die and molds with HSC technology, Journal of Materials Processing Technology, vol.179, issue.1-3, pp.178-184, 2006.
DOI : 10.1016/j.jmatprotec.2006.03.092

. Siemens, Manual of programming?complementary notions: SINUMERIK 840D, Accessed, vol.26, 2004.

. Siemens, Polynomial functions and Nurbs: SINUMERIK 840D, Accessed, vol.26, 2005.

S. Lavernhe, Put into account of constraints associated to MT-NC couple in generation of 5 axes trajectory in HSM, 2006.

A. Guardiola, R. Ciro, A. Souza, A. , D. Santos et al., Influence of tool path interpolation on cycle time and following error during high-speed milling of die and mold surfaces. Paper presented at the 6th international conference on high-speed milling, pp.21-22, 2007.

A. Souza and R. Coelho, Investigation of tolerances required for NC program's generation using spline polynomial and linear interpolation to describe a free form tool path for high speed milling. Paper presented at the 6th international conference on high-speed milling, pp.21-22, 2007.

V. Pateloup, E. Duc, and P. Ray, Optimization of the pockets hollowing out trajectories for the high speed milling. Paper presented at the 16th French Congress of Mechanics, pp.1-6, 2003.

L. Tapie, K. Mawussi, and B. Anselmetti, Circular tests for HSM machine tools: Bore machining application, International Journal of Machine Tools and Manufacture, vol.47, issue.5, pp.805-819, 2006.
DOI : 10.1016/j.ijmachtools.2006.06.021
URL : https://hal.archives-ouvertes.fr/hal-00422388

V. Pateloup, E. Duc, and R. Pascal, Corner optimization for pocket machining, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, pp.1343-1353, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.011

D. Prevost, S. Liang, W. Zhao, and X. Xi, Modeling advanced torque machine tool/CNC in HSM to optimize the calculation of multi-axis trajectories. PhD thesis, the Normal School Superior of Cachan (LURPA), University of Paris 11 Design of a real-time NURBS interpolator with constant segment length for milling EDM, Int J Adv Manuf Technol, vol.67, pp.427-440, 2010.

H. Zhao, L. Zhu, and H. Ding, A real-time look-ahead interpolation methodology with curvature-continuous B-spline transition scheme for CNC machining of short line segments, International Journal of Machine Tools and Manufacture, vol.65, pp.88-98, 2013.
DOI : 10.1016/j.ijmachtools.2012.10.005

K. Erkorkmaz, S. Yeung, and Y. Altintas, Virtual CNC system. Part II. High speed contouring application, International Journal of Machine Tools and Manufacture, vol.46, issue.10, pp.1124-1138, 2006.
DOI : 10.1016/j.ijmachtools.2005.08.001

X. Pessoles, Aid to putting-down choice in 5 axes continuous machining by the kinematic behavior modeling of the machine tools, p.Paul Sabatier, 2010.

E. Msaddek, Z. Bouaziz, G. Dessein, and M. Baili, Optimization of pocket machining strategy in HSM, The International Journal of Advanced Manufacturing Technology, vol.27, issue.9???12, pp.69-81, 2012.
DOI : 10.1007/s00170-011-3801-9
URL : https://hal.archives-ouvertes.fr/hal-00735765

E. Msaddek, Z. Bouaziz, M. Baili, and G. Dessein, Modeling and simulation of high-speed milling centers dynamics, The International Journal of Advanced Manufacturing Technology, vol.47, issue.3, pp.877-888, 2011.
DOI : 10.1007/s00170-010-2884-z
URL : https://hal.archives-ouvertes.fr/hal-00793153

E. Duc, Machining of freeform?contribution to the improvement of the quality of machining paths, the Normal School Superior, 1998.

M. Smaoui, Z. Bouaziz, A. Zghal, G. Dessein, and M. Baili, Simulation of the deflected cutting tool trajectory in complex surface milling, The International Journal of Advanced Manufacturing Technology, vol.19, issue.5-8, pp.463-474, 2011.
DOI : 10.1007/s00170-011-3213-x
URL : https://hal.archives-ouvertes.fr/hal-00793552

G. Dessein and X. Desforges, Path defects in high speed machining. Paper presented at the 3rd international conference on integrated design and manufacturing in mechanical engineering, pp.16-19, 2000.

A. Jalid, S. Hariri, J. Senelaer, and A. Gharad, Uncertainties valuation of the measure on the tridimensional measure machine: new method of estimation of the surface parameters and associated uncertainties. 19th French congress of mechanic, pp.24-28, 2009.