K. F. Beckstette, Trends in Asphere and Freeform Optics, Proc. of Optonet Workshop, 2008.

P. R. Dumas, J. Fleig, G. W. Forbes, D. Golini, and W. I. Kordonski, Flexible Polishing and Metrology Solutions for Free- Form Optics, p.1372, 2014.

G. Wanders, Advanced Techniques in Freeform Manufacturing, Proc. of Optonet Workshop, 2006.

H. H. Karow, Fabrication Methods for Precision Optics, pp.334-578, 1993.

A. Y. Yi, C. Huang, F. Klocke, C. Brecher, and G. Pongs, Development of a compression molding process for three-dimensional tailored free-form glass optics, Applied Optics, vol.45, issue.25, pp.6511-6518, 2006.
DOI : 10.1364/AO.45.006511

W. B. Lee, C. F. Cheung, W. M. Chiu, and T. P. Leung, An investigation of residual form error compensation in the ultra-precision machining of aspheric surfaces, Journal of Materials Processing Technology, vol.99, issue.1-3, pp.129-134, 2000.
DOI : 10.1016/S0924-0136(99)00403-3

H. Nouira, R. Bergmans, A. Küng, H. Piree, R. Henselmans et al., Ultra-High Precision CMMs as well as Tactile and Optical Single Scanning Probes Evaluation in Dimensional Metrology, Proc. of CAFMET, 2014.

E. Abbé, Meßapparate Für Physiker, Zeitschrift Für Instrumentenkunde, vol.10, pp.446-447, 1890.

R. Leach, Optical Measurement of Surface Topography, pp.71-106, 2011.
DOI : 10.1007/978-3-642-12012-1

D. J. Whitehouse, Surfaces and Their Measurement, 2002.

J. J. Moré, The Levenberg-Marquardt algorithm: Implementation and theory, Numerical Analysis, vol.11, pp.105-116, 1978.
DOI : 10.1016/B978-0-12-468650-2.50005-5

D. C. Liu and J. Nocedal, On the limited memory BFGS method for large scale optimization, Mathematical Programming, vol.32, issue.2, pp.503-528, 1989.
DOI : 10.1007/BF01589116

J. Nocedal, Updating quasi-Newton matrices with limited storage, Mathematics of Computation, vol.35, issue.151, pp.773-782, 1980.
DOI : 10.1090/S0025-5718-1980-0572855-7

A. Vissiere, H. Nouira, M. Damak, O. Gibaru, D. et al., A newly conceived cylinder measuring machine and methods that eliminate the spindle errors, Measurement Science and Technology, vol.23, issue.9, 2012.
DOI : 10.1088/0957-0233/23/9/094015
URL : https://hal.archives-ouvertes.fr/hal-01084382

A. Vissiere, H. Nouira, M. Damak, O. Gibaru, D. et al., Concept and architecture of a new apparatus for cylindrical form measurement with a nanometric level of accuracy, Measurement Science and Technology, vol.23, issue.9, 2012.
DOI : 10.1088/0957-0233/23/9/094014
URL : https://hal.archives-ouvertes.fr/hal-01084368

V. Zelený and V. Stejskal, The Most Recent Ways of CMM Calibration

. Fig, 12 Tactile measurement residual errors for a clear aperture of r = 1.75 mm. (a) Histogram distribution of the residual errors (blue) and theoretical normal distribution fit (red) around the average and for a span from -3? to 3?; (b) residual errors map web, 2000.

R. Thalmann, A New High Precision Length Measuring Machine, Proc. of 8th International Congress of Metrology, 1997.

D. Flack, Good Practice Guide No. 42-CMM Verification, National Physical Laboratory, issue.2, 2011.

C. O. Lee, K. Park, B. C. Park, L. , and Y. W. , An algorithm for stylus instruments to measure aspheric surfaces, Measurement Science and Technology, vol.16, issue.5, p.1215, 2005.
DOI : 10.1088/0957-0233/16/5/023

J. Stone, S. D. Phillips, and G. A. Mandolfo, Corrections for wavelength variations in precision interferometric displacement measurements, Journal of Research of the National Institute of Standards and Technology, vol.101, issue.5, pp.671-674, 1996.
DOI : 10.6028/jres.101.065

B. En and . Iso, Geometrical Product Specifications (GPS) Surface Texture. Areal Nominal Characteristics of Non-Contact (Confocal Chromatic Probe) Instruments, pp.25178-602, 2010.

D. Vaissiere, Métrologie tridimensionnelle des états de surface par microscopie confocale à champ étendu, 2003.

H. Nouira, N. El-hayek, X. Yuan, N. Anwer, and J. Salgado, Metrological Characterization of Optical Confocal Sensors Measurements, Proc. of 14th International Conference on Metrology and Properties of Engineering Surfaces, 2013.

H. Nouira, N. El-hayek, X. Yuan, and N. Anwer, Characterization of the main error sources of chromatic confocal probes for dimensional measurement, Measurement Science and Technology, vol.25, issue.4, 2014.
DOI : 10.1088/0957-0233/25/4/044011

F. Fang, X. Zhang, A. Weckenmann, G. Zhang, and C. Evans, Manufacturing and measurement of freeform optics, CIRP Annals, vol.62, issue.2, pp.823-846, 2013.
DOI : 10.1016/j.cirp.2013.05.003

G. W. Forbes, Shape specification for axially symmetric optical surfaces, Optics Express, vol.15, issue.8, pp.5218-5226, 2007.
DOI : 10.1364/OE.15.005218

I. Dis, Optics and Photonics -Preparation of Drawings for Optical Elements and Systems -Part 5: Surface Form Tolerances, pp.10110-10115, 2007.

W. Zheng, P. Bo, Y. Liu, W. , and W. , Fast B-spline curve fitting by L-BFGS, Computer Aided Geometric Design, vol.29, issue.7, pp.448-462, 2012.
DOI : 10.1016/j.cagd.2012.03.004

S. J. Ahn, Least Squares Orthogonal Distance Fitting of Curves and Surfaces in Space, Document ID : LNCS 3151, 2004.
DOI : 10.1007/b104017

F. Pomerleau, F. Colas, R. Siegwart, and S. Magnenat, Comparing ICP variants on real-world data sets, Autonomous Robots, vol.25, issue.3, pp.133-148, 2013.
DOI : 10.1002/rob.20234
URL : https://hal.archives-ouvertes.fr/hal-01143458