S. Charton, A. Kacem, A. Amokrane, G. Borda, F. Puel et al., Actinides oxalate precipitation in emulsion modeling: From the drop scale to the industrial process, Chemical Engineering Research and Design, vol.91, issue.4, pp.91-660, 2013.
DOI : 10.1016/j.cherd.2013.02.001

URL : https://hal.archives-ouvertes.fr/hal-01271829

R. J. Davey, A. M. Hilton, and J. Garside, Crystallization from Oil in Water Emulsions, Chemical Engineering Research and Design, vol.75, issue.2, pp.75-245, 1997.
DOI : 10.1205/026387697523525

A. Khalil, F. Puel, X. Cosson, O. Gorbatchev, Y. Chevalier et al., Crystallization-in-emulsion process of a melted organic compound: In situ optical monitoring and simultaneous droplet and particle size measurements, Journal of Crystal Growth, vol.342, issue.1, pp.99-109, 2012.
DOI : 10.1016/j.jcrysgro.2011.06.005

URL : https://hal.archives-ouvertes.fr/hal-01271819

A. C. Carvalho, D. Chicoma, C. Sayer, and R. Giudici, Comparison of Vinyl Acetate - Butyl Acrylate Emulsion Copolymerizations Conducted in a Continuous Pulsed Sieve Plate Column Reactor and in a Batch Stirred Tank Reactor, Macromolecular Symposia, vol.138, issue.1, pp.243-147, 2006.
DOI : 10.1002/masy.200651115

X. Ni, Y. Zhang, and I. Mustafa, Correlation of polymer particle size with droplet size in suspension polymerisation of methylmethacrylate in a batch oscillatory-baffled reactor, Chemical Engineering Science, vol.54, issue.6, pp.841-850, 1999.
DOI : 10.1016/S0009-2509(98)00279-6

G. S. Calabrese and S. Pissavini, From batch to continuous flow processing in chemicals manufacturing, AIChE Journal, vol.28, issue.4, pp.828-834, 2011.
DOI : 10.1002/aic.12598

D. A. Paquet and W. H. Ray, Tubular reactors for emulsion polymerization: I. Experimental investigation, AIChE Journal, vol.40, issue.1, pp.73-87, 1994.
DOI : 10.1002/aic.690400110

C. Sayer, M. Palma, and R. Giudici, Modeling Continuous Vinyl Acetate Emulsion Polymerization Reactions in a Pulsed Sieve Plate Column, Industrial & Engineering Chemistry Research, vol.41, issue.7, pp.41-1733, 2002.
DOI : 10.1021/ie010675q

M. Zerfa and B. W. Brooks, Experimental investigation of vinyl chloride drop behavior during suspension polymerization, Journal of Applied Polymer Science, vol.65, issue.1, pp.127-134, 1997.
DOI : 10.1002/(SICI)1097-4628(19970705)65:1<127::AID-APP16>3.0.CO;2-0

F. Jahanzad, S. Sajjadi, and B. W. Brooks, On the evolution of particle size average and size distribution in suspension polymerization processes, Macromolecular Symposia, vol.206, issue.1, pp.255-262, 2004.
DOI : 10.1002/masy.200450220

F. Jahanzad, S. Sajjadi, and B. W. Brooks, Characteristic intervals in suspension polymerisation reactors: An experimental and modelling study, Chemical Engineering Science, vol.60, issue.20, pp.5574-5589, 2005.
DOI : 10.1016/j.ces.2005.04.063

C. Charcosset, I. Limayem, and H. Fessi, The membrane emulsification process???a review, Journal of Chemical Technology & Biotechnology, vol.79, issue.3, pp.209-218, 2004.
DOI : 10.1002/jctb.969

K. Urban, G. Wagner, D. Schaffner, D. Röglin, and J. Ulrich, Rotor-Stator and Disc Systems for Emulsification Processes, Chemical Engineering & Technology, vol.52, issue.1, pp.29-53, 2006.
DOI : 10.1002/ceat.200500304

E. Lobry, F. Theron, C. Gourdon, N. Le-sauze, C. Xuereb et al., Turbulent liquid???liquid dispersion in SMV static mixer at high dispersed phase concentration, Chemical Engineering Science, vol.66, issue.23, pp.66-5762, 2011.
DOI : 10.1016/j.ces.2011.06.073

URL : https://hal.archives-ouvertes.fr/hal-00782653

. Fig, Observation of the skin on the sample at low conversion for (a) Test 1 and (b) Test 2 (be careful both enlargements are different)

F. Theron and N. L. Sauze, Comparison between three static mixers for emulsification in turbulent flow, International Journal of Multiphase Flow, vol.37, issue.5, pp.488-500, 2011.
DOI : 10.1016/j.ijmultiphaseflow.2011.01.004

F. Theron, N. Le-sauze, and A. Ricard, Turbulent Liquid???Liquid Dispersion in Sulzer SMX Mixer, Industrial & Engineering Chemistry Research, vol.49, issue.2, pp.623-632, 2010.
DOI : 10.1021/ie900090d

J. T. Davies, Drop sizes of emulsions related to turbulent energy dissipation rates, Chemical Engineering Science, vol.40, issue.5, pp.839-842, 1985.
DOI : 10.1016/0009-2509(85)85036-3

S. Schultz, G. Wagner, K. Urban, and J. Ulrich, High-Pressure Homogenization as a Process for Emulsion Formation, Chemical Engineering & Technology, vol.27, issue.4, pp.361-368, 2004.
DOI : 10.1002/ceat.200406111

E. W. Barega, E. Zondervan, and A. B. De-haan, Influence of Physical Properties and Process Conditions on Entrainment Behavior in a Static-Mixer Settler Setup, Industrial & Engineering Chemistry Research, vol.52, issue.8, pp.52-2958, 2013.
DOI : 10.1021/ie301580m

E. Lobry, C. Gourdon, C. Xuereb, and T. Lasuye, Liquid?liquid dispersion in cocurrent disc and doughnut pulsed column effect of the operating conditions, physical properties and materials parameters, Chem. Eng. J, pp.233-257, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00861546

M. Torab-mostaedi, A. Ghaemi, M. Asadollahzadeh, and P. Pejmanzad, Mass transfer performance in pulsed disc and doughnut extraction columns, Brazilian Journal of Chemical Engineering, vol.28, issue.3, pp.447-456, 2011.
DOI : 10.1590/S0104-66322011000300010

C. W. Angle and H. A. Hamza, Predicting the sizes of toluene-diluted heavy oil emulsions in turbulent flow Part 2: Hinze???Kolmogorov based model adapted for increased oil fractions and energy dissipation in a stirred tank, Chemical Engineering Science, vol.61, issue.22
DOI : 10.1016/j.ces.2006.01.014

K. Arai, M. Konno, Y. Matanuga, and S. Saito, EFFECT OF DISPERSED-PHASE VISCOSITY ON THE MAXIMUM STABLE DROP SIZE FOR BREAKUP IN TURBULENT FLOW, Journal of Chemical Engineering of Japan, vol.10, issue.4, pp.10-325, 1977.
DOI : 10.1252/jcej.10.325

R. P. Borwankar, S. I. Chung, and D. T. Wasan, Drop sizes in turbulent liquid???liquid dispersions containing polymeric suspension stabilizers. I. The breakage mechanism, Journal of Applied Polymer Science, vol.32, issue.7, pp.32-5749, 1986.
DOI : 10.1002/app.1986.070320708

E. G. Chatzi and C. Kiparssides, Steady-state drop-size distributions in high holup fraction dispersion systems, AIChE Journal, vol.41, issue.7, pp.1640-1652, 1995.
DOI : 10.1002/aic.690410705

R. F. Meyer, W. B. Rogers, M. T. Mcclendon, and J. C. Crocker, Producing Monodisperse Drug-Loaded Polymer Microspheres via Cross-Flow Membrane Emulsification: The Effects of Polymers and Surfactants, Langmuir, vol.26, issue.18, pp.14479-14487, 2010.
DOI : 10.1021/la1023136

K. K. Singh, S. M. Mahajani, K. T. Shenoy, and S. K. Ghosh, Representative drop sizes and drop size distributions in A/O dispersions in continuous flow stirred tank, Hydrometallurgy, vol.90, issue.2-4, pp.121-136, 2008.
DOI : 10.1016/j.hydromet.2007.10.003

N. E. Pereira, Characterisation of a Continuous Oscillatory Baffled Tubular Reactor, 2002.

N. E. Pereira and X. Ni, Droplet size distribution in a continuous oscillatory baffled reactor, Chemical Engineering Science, vol.56, issue.3, pp.735-739, 2001.
DOI : 10.1016/S0009-2509(00)00283-9

S. Hall, M. Cooke, A. El-hamouz, and A. J. Kowalski, Droplet break-up by in-line Silverson rotor???stator mixer, Chemical Engineering Science, vol.66, issue.10, pp.66-2068, 2011.
DOI : 10.1016/j.ces.2011.01.054

H. G. Yuan, G. Kalfas, and W. H. Ray, SUSPENSION POLYMERIZATION, Journal of Macromolecular Science, Part C: Polymer Reviews, vol.5, issue.2-3, pp.215-299, 1991.
DOI : 10.1002/app.1987.070340616

G. F. Hoedemakers and D. Thoenes, Continuous Emulsion Polymerisation in a Pulsed Packed Column, 1990.
DOI : 10.1007/978-94-009-0767-6_23

X. Ni, J. C. Johnstone, K. C. Symes, B. D. Grey, and D. C. Bennett, Suspension polymerization of acrylamide in an oscillatory baffled reactor: From drops to particles, AIChE Journal, vol.51, issue.8, pp.47-1746, 2001.
DOI : 10.1002/aic.690470807

X. Ni, K. R. Murray, Y. Zhang, D. C. Bennett, and T. Howes, Polymer product engineering utilising oscillatory baffled reactors, Powder Technology, vol.124, issue.3, pp.281-286, 2002.
DOI : 10.1016/S0032-5910(02)00022-0

X. Ni, G. Brogan, A. Struthers, D. C. Bennett, and S. F. Wilson, A Systematic Study of the Effect of Geometrical Parameters on Mixing Time in Oscillatory Baffled Columns, Chemical Engineering Research and Design, vol.76, issue.5, pp.76-635, 1998.
DOI : 10.1205/026387698525162

X. Ni, Y. S. De-gélicourt, M. H. Baird, and N. V. Rao, Scale-up of single phase axial dispersion coefficients in batch and continuous oscillatory baffled tubes, The Canadian Journal of Chemical Engineering, vol.45, issue.3, pp.79-444, 2001.
DOI : 10.1002/cjce.5450790318

X. Ni, Y. Zhang, and I. Mustafa, An investigation of droplet size and size distribution in methylmethacrylate suspensions in a batch oscillatory-baffled reactor, Chemical Engineering Science, vol.53, issue.16, pp.2903-2919, 1998.
DOI : 10.1016/S0009-2509(98)00124-9

P. Stonestreet, P. M. Van-der, and . Veeken, The Effects of Oscillatory Flow and Bulk Flow Components on Residence Time Distribution in Baffled Tube Reactors, Chemical Engineering Research and Design, vol.77, issue.8, pp.77-671, 1999.
DOI : 10.1205/026387699526809

Y. Zhang, X. Ni, and I. Mustafa, A Study of Oil-Water Dispersion in a Pulsed Baffled Reactor, Journal of Chemical Technology & Biotechnology, vol.66, issue.3, pp.305-311, 1996.
DOI : 10.1002/(SICI)1097-4660(199607)66:3<305::AID-JCTB517>3.0.CO;2-3

D. Mignard, L. P. Amin, and X. Ni, Determination of breakage rates of oil droplets in a continuous oscillatory baffled tube, Chemical Engineering Science, vol.61, issue.21, pp.61-6902, 2006.
DOI : 10.1016/j.ces.2006.07.025

X. Ni and N. E. Pereira, Parameters affecting fluid dispersion in a continuous oscillatory baffled tube, AIChE Journal, vol.54, issue.1, pp.37-45, 2000.
DOI : 10.1002/aic.690460106

V. C. Eze, A. N. Phan, C. Pirez, A. P. Harvey, A. F. Lee et al., Heterogeneous catalysis in an oscillatory baffled flow reactor, Catalysis Science & Technology, vol.54, issue.183, pp.2373-2379, 2013.
DOI : 10.1039/c3cy00282a

A. N. Phan, A. P. Harvey, and V. Eze, Rapid Production of Biodiesel in Mesoscale Oscillatory Baffled Reactors, Chemical Engineering & Technology, vol.6, issue.12, pp.1214-1220, 2012.
DOI : 10.1002/ceat.201200031

F. Castro, A. Ferreira, F. Rocha, A. Vicente, and J. A. Teixeira, Continuous-flow precipitation of hydroxyapatite at 37 degrees c in a meso oscillatory flow reactor, Ind. Eng. Chem. Res, pp.52-9816, 2013.

L. S. Peixoto, P. A. Melo, M. Nele, and J. C. Pinto, Expanded Core/Shell Poly(vinyl acetate)/Poly(vinyl alcohol) Particles for Embolization, Macromolecular Materials and Engineering, vol.43, issue.8, pp.294-463, 2009.
DOI : 10.1002/mame.200900028

. Pinto, Synthesis of poly(vinyl alcohol) and/or poly(vinyl acetate) particles with spherical morphology and core-shell structure and its use in vascular embolization, Macromol. Symp, vol.243, pp.190-199, 2006.

G. Kalfas, H. Yuan, and W. H. Ray, Modeling and experimental studies of aqueous suspension polymerization processes. 2. Experiments in batch reactors, Industrial & Engineering Chemistry Research, vol.32, issue.9, pp.1831-1838, 1993.
DOI : 10.1021/ie00021a006

W. S. Lyoo and H. W. Lee, Synthesis of high-molecular-weight poly(vinyl alcohol) with high yield by novel one-batch suspension polymerization of vinyl acetate and saponification, Colloid Polym. Sci, pp.280-835, 2002.

W. S. Lyoo, S. G. Lee, J. P. Kim, S. S. Han, and C. J. Lee, Low temperature suspension polymerization of vinyl acetate using 2,2???-azobis(2,4-dimethylvaleronitrile) for the preparation of high molecular weight poly(vinyl alcohol) with high yield, Colloid & Polymer Science, vol.276, issue.11, pp.276-951, 1998.
DOI : 10.1007/s003960050333

H. Buron, O. Mengual, G. Meunier, I. Cayré, and P. Snabre, Optical characterization of concentrated dispersions: applications to laboratory analyses and on-line process monitoring and control, Polymer International, vol.53, issue.9, pp.53-1205, 2004.
DOI : 10.1002/pi.1231

A. Pizzino, M. Catté, E. Van-hecke, J. Salager, and J. Aubry, On-line light backscattering tracking of the transitional phase inversion of emulsions, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.338, issue.1-3, pp.148-154, 2009.
DOI : 10.1016/j.colsurfa.2008.05.041

A. B. Jahya, G. W. Stevens, and H. R. Pratt, Pulsed Disc???and???Doughnut Column Performance, Solvent Extraction and Ion Exchange, vol.31, issue.1, pp.63-82, 2009.
DOI : 10.1021/ie00018a023

K. Sreenivasulu, D. Venkatanarasaiah, and Y. B. Varma, Drop size distributions in liquid pulsed columns, Bioprocess Engineering, vol.17, issue.3, pp.189-195, 1997.
DOI : 10.1007/s004490050374

M. Torab-mostaedi, A. Ghaemi, and M. Asadollahzadeh, Flooding and drop size in a pulsed disc and doughnut extraction column, Chemical Engineering Research and Design, vol.89, issue.12, pp.2742-2751, 2011.
DOI : 10.1016/j.cherd.2011.06.006

M. L. Van-delden, G. S. Vos, N. J. Kuipers, and A. B. De-haan, Extraction of Caprolactam with Toluene in a Pulsed Disc and Doughnut Column???Part II: Experimental Evaluation of the Hydraulic Characteristics, Solvent Extraction and Ion Exchange, vol.5, issue.4, pp.519-538, 2006.
DOI : 10.1021/ie00038a032

A. C. Jealous and H. F. Johnson, Power Requirements for Pulse Generation in Pulse Columns, Industrial & Engineering Chemistry, vol.47, issue.6, pp.47-1159, 1955.
DOI : 10.1021/ie50546a021

T. Ueda, K. Takeuchi, and M. Kato, Polymer particle formation in suspension polymerization of vinyl chloride and vinyl acetate, Journal of Polymer Science Part A-1: Polymer Chemistry, vol.10, issue.10, pp.1-2841, 1972.
DOI : 10.1002/pol.1972.170101003