B. Abdolhamidzadeh, T. Abbasi, D. Rashtchian, and A. S. , Domino effect in processindustry -An inventory of past events and identification of some patterns, Journal of Loss Prevention in the Process Industries, pp.575-593, 2011.

R. M. Darbra, A. Palacios, and C. J. , Domino effect in chemical accidents: Main features and accident sequences, Journal of Hazardous Materials, vol.183, issue.1-3, pp.556-573, 2010.
DOI : 10.1016/j.jhazmat.2010.07.061

F. P. Lees, Loss prevention in the process industries, 1996.

D. F. Bagster and P. R. , The Estimation of Domino Incident Frequencies-An Approach, Trans IChemE, vol.69, pp.195-199, 1991.

C. Delvosalle, Domino effects phenomena: Definition, Overview and Classification, European Seminar on Domino Effects. Leuven, Belgium, Federal Ministry of Employment, Safety Administration, Direction Chemical Risks, pp.5-15, 1996.

J. Gledhill and . Lines, Development of methods to assess the significance of domino effects from major hazard sites, 1998.

F. I. Khan and S. A. Abbasi, Major accidents in process industries and an analysis of causes and consequences, Journal of Loss Prevention in the Process Industries, vol.12, issue.5, pp.361-378, 1999.
DOI : 10.1016/S0950-4230(98)00062-X

V. Cozzani and E. Salzano, Threshold values for domino effects caused by blast wave interaction with process equipment, Journal of Loss Prevention in the Process Industries, vol.17, issue.6, pp.437-447, 2004.
DOI : 10.1016/j.jlp.2004.08.003

V. Cozzani, The assessment of risk caused by domino effect in quantitative area risk analysis, Journal of Hazardous Materials, vol.127, issue.1-3, pp.14-30, 2005.
DOI : 10.1016/j.jhazmat.2005.07.003

F. I. Khan and A. S. , Models for domino effect analysis in chemical process industries, Process Safety Progress, vol.17, issue.2, pp.107-113, 1998.
DOI : 10.1002/prs.680170207

C. M. Petersen, Analysis of the LPG-disaster in mexico city, Journal of Hazardous Materials, vol.20, pp.85-107, 1988.
DOI : 10.1016/0304-3894(88)87008-0

. Hindu, Major fire in Vishakhapatnam refinery, 1997.

F. I. Khan and S. A. Abbasi, DOMIFFECT (DOMIno eFFECT): user-friendly software for domino effect analysis, Environmental Modelling and Software, vol.13, issue.2, pp.163-177, 1998.
DOI : 10.1016/S1364-8152(98)00018-8

F. Kadri, B. Birregah, and E. Châtelet, Abstract, Journal of Homeland Security and Emergency Management, vol.0, issue.0, pp.217-241, 2014.
DOI : 10.1515/jhsem-2012-0077

E. Krausmann and F. Mushtaq, A qualitative Natech damage scale for the impact of floods on selected industrial facilities, Natural Hazards, vol.322, issue.2, pp.179-197, 2008.
DOI : 10.1007/s11069-007-9203-5

L. J. Steinberg, H. Sengul, C. , and A. M. , Natech risk and management: an assessment of the state of the art, Natural Hazards, vol.14, issue.2, pp.143-152, 2008.
DOI : 10.1007/s11069-007-9205-3

D. G. Dimattia, F. L. Khan, and A. P. , Determination of human error probabilities for offshore platform musters, Journal of Loss Prevention in the Process Industries, pp.488-501, 2005.
DOI : 10.1016/j.jlp.2005.07.021

Z. Mohaghegh and A. Mosleh, Incorporating organizational factors into probabilistic risk assessment of complex socio-technical systems: Principles and theoretical foundations, Safety Science, vol.47, issue.8, pp.1139-1158, 2009.
DOI : 10.1016/j.ssci.2008.12.008

J. Piwowar, E. Châtelet, and P. Laclémence, An efficient process to reduce infrastructure vulnerabilities facing malevolence, Reliability Engineering & System Safety, vol.94, issue.11, pp.1869-1877, 2009.
DOI : 10.1016/j.ress.2009.06.009

P. Perilhon, MOSAR, techniques de l'ingénieur, traité sécurité et gestion des risques, SE, vol.4, pp.60-61, 2000.

L. Moigne and J. L. , Théorie du Système Général, théorie de la modélisation, 1994.

F. Kadri, E. Chatelet, and P. Lallement, The Assessment of Risk Caused by Fire and Explosion in Chemical Process Industry: A Domino Effect-Based Study, Journal of Risk Analysis and Crisis Response, vol.3, issue.2, pp.66-76, 2013.
DOI : 10.2991/jrarc.2013.3.2.1
URL : https://hal.archives-ouvertes.fr/hal-01026560

F. Kadri, E. Châtelet, and G. Chen, Method for quantitative assessment of the domino effect in industrial sites, Process Safety and Environmental Protection, vol.91, issue.6, pp.452-462, 2013.
DOI : 10.1016/j.psep.2012.10.010

F. Kadri, E. Chatelet, and G. Chen, Method for Quantitative Assessment of Domino Effect Caused by Heat Radiation in Industrial Sites, Presented at the International Conference on Risk Analysis (ICRA4), pp.1-8, 2011.

N. A. Labath and A. Amendola, Analysis of domino effect incident scenarios by the DYLAM aproach, 6th International ymposium on Loss Prevention and Safety Promotion in the Process Industries, Olso Norway, pp.12-22, 1989.

G. Purdy, R. M. Pitblado, and D. F. Bagster, Tank Fire Escalation Modeling and Mitigation, Internaional Symposium on Loss Prevention and Safety promotion in the process Industries, 1992.

G. N. Pettitt, Evaluating the probability of major hazardous incidents as a result of escalation events, Journal of Loss Prevention in the Process Industries, vol.6, issue.1, pp.37-46, 1993.
DOI : 10.1016/0950-4230(93)80018-H

D. F. Bagster and R. M. Pitblado, The Estimation of Domino Incident Frequencies-An Approach Trans IChemE, pp.195-199, 1991.

P. Latha, G. Gautam, and K. V. Raghavan, Strategies for Quantification of Thermally Initiated Cascade Effects Journal of Loss Prevention Process Industries, pp.15-21, 1992.

N. F. Scilly and J. H. Crowther, Methodologies for Predicting Domino Effects from Pressure Vessel Fragmentation International Conference on Hazard Identification and Risk Analysis, Human Factors and Human Reliability in Process Safety, pp.15-17, 1992.

N. A. Eisenberg, C. J. Lynch, and R. J. Breeding, Vulnerability Model: A Simulation System for Assessing Damage Resulting from Marine Spills, 1975.

F. I. Khan and S. A. Abbasi, Hazard Identification and Ranking (HIRA) : A Multi-Attribute Technique for Hazard Identification Process Safety Progress, pp.1-16, 1998.

V. Cozzani and E. Salzano, The quantitative assessment of domino effects caused by overpressure, Journal of Hazardous Materials, vol.107, issue.3, pp.67-80, 2004.
DOI : 10.1016/j.jhazmat.2003.09.013

V. Cozzani and E. Salzano, The quantitative assessment of domino effect caused by overpressure Part II, Case studies Journal of Hazardous Materials, A107, pp.81-94, 2004.

F. Kadri, E. Châtelet, and G. Chen, Quantitative Risk Assessment of Domino Effect Caused by Heat Load, Int. J. Syst. Control, vol.3, pp.42-48, 2012.

F. Kadri, E. Chatelet, and G. Chen, Method for quantitative assessment of domino effect caused by overpressure Advances in Safety, Reliability and Risk Management, pp.1360-1367, 2011.

V. Cozzani, G. Antonioni, and G. Spadoni, Quantitative assessment of domino scenarios by a GISbased software tool Journal of Loss Prevention in the Process Industries, pp.463-477, 2006.

G. Landucci, G. Gubinelli, G. Antonioni, and V. Cozzani, The assessment of the damage probability of storage tanks in domino events triggered by fire, Accident Analysis & Prevention, vol.41, issue.6, pp.41-1206, 2009.
DOI : 10.1016/j.aap.2008.05.006

F. Kadri, P. Lallement, and E. Chatelet, The Quantitative Risk Assessment of domino effect on Industrial Plants Using Colored Stochastic Petri Nets, PSAM11 & ESREL Conference. Presented at the PSAM11 & ESREL Conference, p.10, 2012.

W. E. Baker, P. A. Cox, P. Westine, J. J. Kulesz, and R. A. Strehlow, Explosion Hazards and Evaluation Amsterdam, p.807, 1983.

U. Hauptmanns, A Monte-Carlo besed procedure for treating the flight of missiles from tank explosion Probabilitic Engineering Mechanics, pp.307-312, 2001.

U. Hauptmanns, A procedure for analyzing the flight of missiles from explosions of cylindrical vessels Journal of Loss Prevention in the Process Industries, pp.395-402, 2001.

G. Gubinelli, S. Zanelli, and V. Cozzani, A simplified model for the assessment of the impact probability of fragments, Journal of Hazardous Materials, vol.116, issue.3, pp.175-187, 2004.
DOI : 10.1016/j.jhazmat.2004.09.002

R. Pula, F. I. Khan, B. Veitch, and P. R. Amyotte, A Model for Estimating the Probability of Missile Impact: Missiles Originating from Bursting Horizontal Cylindrical Vessels Process Safety Progress, pp.129-139, 2007.

G. Gubinelli and V. Cozzani, Assessment of missile hazards: Evaluation of the fragment number and drag factors, Journal of Hazardous Materials, vol.161, issue.1, pp.439-449, 2009.
DOI : 10.1016/j.jhazmat.2008.03.116

G. Gubinelli and V. Cozzani, Assessment of missile hazards: Identification of reference fragmentation patterns, Journal of Hazardous Materials, vol.163, issue.2-3, pp.1008-1018, 2009.
DOI : 10.1016/j.jhazmat.2008.07.056

A. Mebarki, Q. B. Nguyen, F. Mercier, R. Ami-saada, and M. Reimeringer, Reliability analysis of metallic targets under metallic rods impact: Towards a simplified probabilistic approach, Journal of Loss Prevention in the Process Industries, pp.518-527, 2008.
DOI : 10.1016/j.jlp.2008.04.002
URL : https://hal.archives-ouvertes.fr/hal-00717832

A. Mebarki, F. Mercier, Q. B. Nguyen, and R. Ami-saada, Structural fragments and explosions in industrial facilities. Part I: Probabilistic description of the source terms, Journal of Loss Prevention in the Process Industries, pp.408-416, 2009.
DOI : 10.1016/j.jlp.2009.02.006
URL : https://hal.archives-ouvertes.fr/hal-00814864

A. Mebarki, Q. B. Nguyen, and F. Mercier, Structural fragments and explosions in industrial facilities: Part II ??? Projectile trajectory and probability of impact, Journal of Loss Prevention in the Process Industries, pp.417-425, 2009.
DOI : 10.1016/j.jlp.2009.02.005
URL : https://hal.archives-ouvertes.fr/hal-00814864

Q. B. Nguyen, A. Mebarki, A. Saada, R. Mercier, F. Reimeringer et al., Integrated probabilistic framework for domino effect and risk analysis Advances in Engineering Software, pp.40-892, 2009.

F. I. Khan and S. A. Abbasi, An assessment of the likelihood of occurrence, and the damage potential of domino effect (chain of accidents) in a typical cluster of industries Journal of Loss Prevention in the Process Industries, pp.283-306, 2001.

F. I. Khan and S. A. Abbasi, Estimation of probabilities and likely consequences of a chain of accidents (domino effect) in Manali Industrial Complex, Journal of Cleaner Production, vol.9, issue.6, pp.493-508, 2001.
DOI : 10.1016/S0959-6526(01)00008-7

F. I. Khan, Use Maximum-Credible Accident Scenarios for Realistic and Reliable Risk Assessment, Chemical Engeneering Progress, issue.11, pp.97-56, 2001.

F. I. Khan and S. A. Abbasi, Criterion for developing credible accident scenarios for risk assessment Journal of Loss Prevention in the Process Industries, pp.467-475, 2002.

G. Antonioni, G. Spadoni, and V. Cozzani, A methodology for the quantitative risk assessment of major accidents triggered by seismic events, Journal of Hazardous Materials, vol.147, issue.1-2, pp.48-59, 2007.
DOI : 10.1016/j.jhazmat.2006.12.043

E. Renni, G. Antonioni, S. Bonvicini, S. Gigliola, and V. Cozzani, A novel framework for the quantitative assessment of risk due to major accidents triggered by lightning, Chemical Engeneering Transactions, vol.17, pp.311-316, 2009.

B. Abdolhamidzadeh, T. Abbasi, D. Rashtchian, and S. A. Abbasi, A new method for assessing domino effect in chemical process industry, Journal of Hazardous Materials, vol.182, issue.1-3, pp.1-3, 2010.
DOI : 10.1016/j.jhazmat.2010.06.049

F. I. Khan and S. A. Abbasi, MAXCRED: A software package for quantitative risk analysis, 1994.

F. I. Khan and S. A. Abbasi, MAXCRED ? a new software package for rapid risk assessment in chemical process industries, Environmental Modelling and Software, pp.11-25, 1999.

F. I. Khan and S. A. Abbasi, Risk analysis of a chloralkali industry situated in a populated area using the software package MAXCRED-II, Process Safety Progress, vol.16, issue.3, pp.172-184, 2004.
DOI : 10.1002/prs.680160312

D. Egidi, F. P. Foraboschi, G. Spadoni, and A. Amendola, The ARIPAR project: analysis of the major accident risks connected with industrial and transportation activities in the Ravenna area, Reliability Engineering & System Safety, vol.49, issue.1, pp.75-89, 1995.
DOI : 10.1016/0951-8320(95)00026-X

G. Spadoni, S. Contini, and G. Uguccioni, The New Version of ARIPAR and the Benefits Given in Assessing and Managing Major Risks in Industrialised Areas, Process Safety and Environmental Protection, vol.81, issue.1, pp.19-30, 2003.
DOI : 10.1205/095758203762851958

S. Ditali, M. Colombi, G. Moreschini, and S. Senni, Consequence analysis in LPG installation using an integrated computer package, Journal of Hazardous Materials, vol.71, issue.1-3, pp.1-3, 2000.
DOI : 10.1016/S0304-3894(99)00077-1

V. Cozzani, A. Tugnoli, and E. Salzano, Prevention of domino effect: From active and passive strategies to inherently safer design, Journal of Hazardous Materials, vol.139, issue.2, pp.209-219, 2007.
DOI : 10.1016/j.jhazmat.2006.06.041

C. Delvosalle, C. Fievez, and S. Brohez, A Methodology and a Software (DOMINOXL) for Studying Domino Effects Chisa, th International Congress of Chemical and Process Engineering, pp.25-29, 2002.

J. Tixier, G. Dusserre, S. Rault-doumax, J. Ollivier, and C. Bourely, OSIRIS: Software for the consequence evaluation of transportation of dangerous goods accidents, Environmental Modelling and Software, pp.17-627, 2002.

J. Tixier, S. Rault-doumax, A. Dandrieux, J. P. Dimbour, and G. Dusserre, GeOsiris : Domino effects software, GOsiris: Logiciel de gestion des effets domino, lambda 13 -ESREL European Conference, pp.1-5, 2002.

J. Y. Lee, J. W. Lee, J. Ko, and . En-sup-yoon, Optimization for allocating the explosive facilities in order to minimize the domino effect using nonlinear programming, Korean Journal of Chemical Engineering, vol.81, issue.1, pp.649-656, 2005.
DOI : 10.1007/BF02705777

G. L. Reniers and W. Dullaert, DomPrevPlanning: User-friendly software for planning domino effects prevention Safety Science, pp.45-1060, 2007.