A. Ammar, D. Ryckelynck, F. Chinesta, and R. Keunings, On the reduction of kinetic theory models related to finitely extensible dumbbells, Journal of Non-Newtonian Fluid Mechanics, vol.134, issue.1-3, pp.136-147, 2006.
DOI : 10.1016/j.jnnfm.2006.01.007
URL : https://hal.archives-ouvertes.fr/hal-01007150

A. Ammar, E. Pruliere, J. Ferec, F. Chinesta, and E. Cueto, Coupling finite elements and reduced approximation bases, Revue europ??enne de m??canique num??rique, vol.18, issue.5-6, 2009.
DOI : 10.3166/ejcm.18.445-463
URL : https://hal.archives-ouvertes.fr/hal-01006702

A. Bialecki, P. Jurgas, and G. Kuhn, Dual reciprocity BEM without matrix inversion for transient heat conduction. Engineering Analysis with Boundary Element, pp.227-236, 2002.

A. Bikas and A. Kanarachos, The dependence of cooling channels system geometry parameters on product quality as a result of uniform mold cooling, Proceedings of the 57th Annual Technical Conference ANTEC 99, pp.578-583, 1999.

C. A. Brebbia and J. Dominguez, Boundary Elements: An Introductory Course, Journal of Applied Mechanics, vol.58, issue.3, 1992.
DOI : 10.1115/1.2897280

C. A. Brebbia, C. S. Chen, and H. Power, Dual reciprocity method using compactly supported radial basis functions, Communications in Numerical Methods in Engineering, vol.15, issue.2, pp.137-150, 1999.

F. Chinesta, A. Ammar, F. Lemarchand, P. Beauchchene, and F. Boust, Alleviating mesh constraints: Model reduction, parallel time integration and high resolution homogenization, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.5, pp.400-413, 2008.
DOI : 10.1016/j.cma.2007.07.022
URL : https://hal.archives-ouvertes.fr/hal-00287227

R. Fletcher, Practical methods of optimization, 1987.
DOI : 10.1002/9781118723203

L. Godinho, A. Tadeu, and N. Simoes, Study of transient heat conduction in 2.5D domains using the boundary element method. Engineering Analysis with Boundary Elements, pp.593-606, 2004.

P. J. Holmes, J. L. Lumleyc, G. Berkoozld, J. C. Mattinglya, and R. W. Wittenberg, Lowdimensional models of coherent structures in turbulence, Physics Reports, vol.287, 1997.

J. Huang and G. Fadel, Bi-Objective Optimization Design of Heterogeneous Injection Mold Cooling Systems, Journal of Mechanical Design, vol.123, issue.2, pp.226-239, 2001.
DOI : 10.1115/1.1347992

K. Karhunen, Uber lineare methoden in der wahrscheinlichkeitsrechnung

. Acad and . Sci, Fennicae, ser, Al. Math. Phys, vol.37, 1946.

P. Krysl, S. Lall, and J. E. Marsden, Dimensional model reduction in non???linear finite element dynamics of solids and structures, International Journal for Numerical Methods in Engineering, vol.31, issue.4, pp.479-504, 2001.
DOI : 10.1002/nme.167

M. M. Loève, Probability theory. The University Series in Higher Mathematics, 1963.

E. N. Lorenz, Empirical orthogonal functions and statistical weather prediction. MIT, Departement of Meteorology, Scientific Report N1, Statistical Forecasting Project, 1956.

Y. Lu, D. Li, and J. Xiao, Simulation of cooling process of injection molding, Progress in Natural Science, vol.6, issue.2, pp.227-234, 1996.

E. Mathey, L. Penazzi, F. M. Schmidt, and F. Ronde-oustau, Automatic optimization of the cooling of injection mold based on the boundary element method Materials Processing and Design: Modeling, Simulation and Applications, Proceddings NUMIFORM 04, pp.222-227, 2004.

J. Moller, M. Carlson, R. Alterovitz, and J. Swartz, Post-ejection cooling behavior of injection molded parts, Proceeding of the 56th Annual Technical Conference ANTEC 98, pp.525-527, 1998.

S. Niromandi, I. Alfaro, E. Cueto, and F. Chinesta, Real-time deformable models of non-linear tissues by model reduction techniques, Computer Methods and Programs in Biomedicine, vol.91, issue.3, pp.223-231, 2008.
DOI : 10.1016/j.cmpb.2008.04.008

S. W. Opolski and T. W. Kwon, Injection molding cooling system design, Annual Technical Conference and Exhibition, pp.264-268, 1987.

T. A. Osswald, Polymer Processing ? Fundamentals, 1998.

H. M. Park and D. H. Cho, The use of the Karhunen-Lo??ve decomposition for the modeling of distributed parameter systems, Chemical Engineering Science, vol.51, issue.1, pp.81-98
DOI : 10.1016/0009-2509(95)00230-8

S. Park and T. Kwon, Optimal cooling system design for the injection molding process, Polymer Engineering & Science, vol.6, issue.9, pp.1450-1462, 1998.
DOI : 10.1002/pen.10316

R. Pasquetti and D. Petit, Inverse diffusion by boundary elements. Engineering Analysis with Boundary Elements, pp.197-205, 1995.
DOI : 10.1016/0955-7997(95)00018-j

N. Pirc, F. Bugarin, F. M. Schmidt, and M. Mongeau, 3D BEM-based cooling-channel shape optimization for injection molding processes, International Journal for Simulation and Multidisciplinary Design Optimization, vol.2, issue.3, pp.245-252, 2008.
DOI : 10.1051/ijsmdo:2008033
URL : http://doi.org/10.1051/ijsmdo:2008033

N. Pirc, F. M. Schmidt, M. Mongeau, F. Bugarin, and F. Chinesta, Optimization of 3D cooling channels in injection molding using DRBEM and model reduction, International Journal of Material Forming, vol.134, issue.S1, 2009.
DOI : 10.1007/s12289-009-0598-2
URL : https://hal.archives-ouvertes.fr/hal-01008627

N. S. Rao, G. Schumacher, N. R. Schott, and K. T. O-'brien, Optimization of Cooling Systems in Injection Molds by an Easily Applicable Analytical Model, Journal of Reinforced Plastics and Composites, vol.21, issue.5, pp.451-459, 2002.
DOI : 10.1177/0731684402021005471

D. Ryckelynck, A priori hyperreduction method: an adaptive approach, Journal of Computational Physics, vol.202, issue.1, pp.346-366, 2005.
DOI : 10.1016/j.jcp.2004.07.015

D. Ryckelynck, L. Hermanns, F. Chinesta, and E. Alarcón, An efficient ???a priori??? model reduction for boundary element models, Engineering Analysis with Boundary Elements, vol.29, issue.8, pp.796-801, 2005.
DOI : 10.1016/j.enganabound.2005.04.003
URL : https://hal.archives-ouvertes.fr/hal-00020778

D. Ryckelynck, F. Chinesta, E. Cueto, and A. Ammar, On thea priori model reduction: Overview and recent developments, Archives of Computational Methods in Engineering, vol.43, issue.5, pp.91-128, 2006.
DOI : 10.1007/BF02905932

L. Sirovich, Turbulence and the dynamics of coherent structures part I: Coherent structures. Quaterly of applied mathematics, XLV, pp.561-57, 1987.

G. H. Sutradhar, L. J. Paulino, and . Gray, Transient heat conduction in homogeneous and nonhomogeneousmaterials by the Laplace transform Galerkin boundary element method. Engineering Analysis with Boundary Elements, pp.119-132, 2002.

L. Tang, K. Pochiraju, C. Chassapis, and S. Manoochehri, A Computer-Aided Optimization Approach for the Design of Injection Mold Cooling Systems, Journal of Mechanical Design, vol.120, issue.2, pp.165-174, 1998.
DOI : 10.1115/1.2826955

N. Verdon, C. Allery, C. Béghein, A. Hamdouni, and D. Ryckelynck, Reduced-order modelling for solving linear and non-linear equations, International Journal for Numerical Methods in Biomedical Engineering, vol.2, issue.1, 2009.
DOI : 10.1002/cnm.1286
URL : https://hal.archives-ouvertes.fr/hal-00541925

M. H. Wesselmann, Impact of moulding conditions on the properties of short fibre reinforced high performance thermoplastic parts, 1998.

S. Y. Yang and L. Lien, Effects of cooling time and mold temperature on quality of moldings with precision contour Advances in Polymer Technology, pp.289-295, 1996.