K. Abdelnour, A. Stinchcombe, and M. Porfiri, Wireless Powering of Ionic Polymer Metal Composites Toward Hovering Microswimmers, IEEE/ASME Transactions on Mechatronics, vol.17, issue.5, pp.924-934, 2012.
DOI : 10.1109/TMECH.2011.2148201

A. Abdulsadda and X. Tan, An artificial lateral line system using IPMC sensor arrays, International Journal of Smart and Nano Materials, vol.20, issue.025029, pp.226-242, 2012.
DOI : 10.1109/JOE.2010.2060810

B. Akle, W. Habchi, and T. Wallmersperger, High surface area electrodes in ionic polymer transducers: Numerical and experimental investigations of the electro-chemical behavior, Journal of Applied Physics, vol.109, issue.7, pp.74509-74510, 2011.
DOI : 10.1063/1.3556751

M. Aureli and M. Porfiri, Nonlinear sensing of ionic polymer metal composites, Continuum Mechanics and Thermodynamics, vol.20, issue.9, pp.273-310, 2013.
DOI : 10.1007/s00161-012-0253-x

M. Aureli, V. Kopman, and M. Porfiri, Free-Locomotion of Underwater Vehicles Actuated by Ionic Polymer Metal Composites, IEEE/ASME Transactions on Mechatronics, vol.15, issue.4, pp.603-614, 2010.
DOI : 10.1109/TMECH.2009.2030887

M. Aureli, W. Lin, and M. Porfiri, On the capacitance-boost of ionic polymer metal composites due to electroless plating: Theory and experiments, Journal of Applied Physics, vol.105, issue.10, pp.104911-104912, 2009.
DOI : 10.1063/1.3129503

M. Aureli, C. Prince, and M. Porfiri, Energy harvesting from base excitation of ionic polymer metal composites in fluid environments, Smart Materials and Structures, vol.19, issue.1, p.15003, 2010.
DOI : 10.1088/0964-1726/19/1/015003

Y. Bahramzadeh and M. Shahinpoor, Dynamic curvature sensing employing ionic-polymer???metal composite sensors, Smart Materials and Structures, vol.20, issue.9, p.94011, 2011.
DOI : 10.1088/0964-1726/20/9/094011

X. Bao, Y. Bar-cohen, and S. Lih, Measurement and macro models of ionomeric polymer metal composites (IPMC) In: Proceedings of the SPIE smart structures and materials symposium, EAPAD conference, p.17, 2002.

Y. Bar-cohen, Electroactive Polymer (EAP) Actuator as Artificial Muscle: Reality, Potential, and Challenges, 2004.

Y. Bar-cohen, S. Leary, and M. Shahinpoor, Flexible low-mass device and mechanisms actuated by electroactive polymers, Proceedings of SPIE conference electroactive polymer actuators and devices, 1999.

J. Barramba, J. Silva, and P. Branco, Evaluation of dielectric gel coating for encapsulation of ionic polymer???metal composite (IPMC) actuators, Sensors and Actuators A: Physical, vol.140, issue.2, pp.232-238, 2007.
DOI : 10.1016/j.sna.2007.06.035

M. Bennett, Ionic liquids as stable solvents for ionic polymer transducers, Sensors and Actuators A: Physical, vol.115, issue.1, pp.79-90, 2004.
DOI : 10.1016/j.sna.2004.03.043

B. Bhandari, G. Lee, and S. Ahn, A review on IPMC material as actuators and sensors: Fabrications, characteristics and applications, International Journal of Precision Engineering and Manufacturing, vol.5, issue.3, pp.141-163, 2012.
DOI : 10.1007/s12541-012-0020-8

C. Bonomo, P. Brunetto, and L. Fortuna, A Tactile Sensor for Biomedical Applications Based on IPMCs, IEEE Sensors Journal, vol.8, issue.8, pp.1486-1493, 2008.
DOI : 10.1109/JSEN.2008.920723

P. Branco and J. Dente, Derivation of a continuum model and its electric equivalent-circuit representation for ionic polymer???metal composite (IPMC) electromechanics, Smart Materials and Structures, vol.15, issue.2, pp.378-392, 2006.
DOI : 10.1088/0964-1726/15/2/019

P. Branco, B. Lopes, and J. Dente, Nonuniformly Charged Ionic Polymer–Metal Composite Actuators: Electromechanical Modeling and Experimental Validation, IEEE Transactions on Industrial Electronics, vol.59, issue.2, pp.1105-1113, 2012.
DOI : 10.1109/TIE.2011.2162710

P. Brunetto, L. Fortuna, and P. Giannone, A Resonant Vibrating Tactile Probe for Biomedical Applications Based on IPMC, IEEE Transactions on Instrumentation and Measurement, vol.59, issue.5, pp.1453-1462, 2010.
DOI : 10.1109/TIM.2009.2038297

P. Brunetto, L. Fortuna, and P. Giannone, Characterization of the Temperature and Humidity Influence on Ionic Polymer–Metal Composites as Sensors, IEEE Transactions on Instrumentation and Measurement, vol.60, issue.8, pp.2951-2959, 2011.
DOI : 10.1109/TIM.2011.2118870

Y. Cha and M. Porfiri, Bias-dependent model of the electrical impedance of ionic polymer-metal composites, Physical Review E, vol.87, issue.2, p.22403, 2013.
DOI : 10.1103/PhysRevE.87.022403

Y. Cha, M. Aureli, and M. Porfiri, A physics-based model of the electrical impedance of ionic polymer metal composites, Journal of Applied Physics, vol.111, issue.12, pp.124901-124902, 2012.
DOI : 10.1063/1.4729051

X. Chen, G. Zhu, and X. Yang, Model-Based Estimation of Flow Characteristics Using an Ionic Polymer–Metal Composite Beam, IEEE/ASME Transactions on Mechatronics, vol.18, issue.3, pp.932-943, 2013.
DOI : 10.1109/TMECH.2012.2194300

Z. Chen and X. Tan, A Control-Oriented and Physics-Based Model for Ionic Polymer--Metal Composite Actuators, IEEE/ASME Transactions on Mechatronics, vol.13, issue.5, pp.519-529, 2008.
DOI : 10.1109/TMECH.2008.920021

Z. Chen, D. Hedgepeth, and X. Tan, A nonlinear, control-oriented model for ionic polymer???metal composite actuators, Smart Materials and Structures, vol.18, issue.5, p.55008, 2009.
DOI : 10.1088/0964-1726/18/5/055008

Z. Chen, S. Shatara, and X. Tan, Modeling of Biomimetic Robotic Fish Propelled by An Ionic Polymer–Metal Composite Caudal Fin, IEEE/ASME Transactions on Mechatronics, vol.15, issue.3, pp.448-459, 2010.
DOI : 10.1109/TMECH.2009.2027812

Z. Chen, X. Tan, and A. Will, A dynamic model for ionic polymer???metal composite sensors, Smart Materials and Structures, vol.16, issue.4, pp.1477-1488, 2007.
DOI : 10.1088/0964-1726/16/4/063

A. Colozza, Fly like a Bird, IEEE Spectrum, vol.44, issue.5, pp.38-43, 2007.
DOI : 10.1109/MSPEC.2007.352531

J. Darryll, Proposer Information Pamphlet (PI) for Defense Advanced Research Project Agency (DARPA) Defense Sciences Office (DSO) Nano Air Vehicle (NAV) Program, 2005.

D. Gennes, P. Okumura, K. Shahinpoor, and M. , Mechanoelectric effects in ionic gels, Europhysics Letters (EPL), vol.50, issue.4, pp.513-518, 2000.
DOI : 10.1209/epl/i2000-00299-3

D. Bufalo, G. Placidi, L. Porfiri, and M. , A mixture theory framework for modeling the mechanical actuation of ionic polymer metal composites, Smart Materials and Structures, vol.17, issue.4, p.45010, 2008.
DOI : 10.1088/0964-1726/17/4/045010

B. Fang, M. Ju, and C. Lin, A new approach to develop ionic polymer???metal composites (IPMC) actuator: Fabrication and control for active catheter systems, Sensors and Actuators A: Physical, vol.137, issue.2, pp.321-329, 2007.
DOI : 10.1016/j.sna.2007.03.024

K. Farinholt and D. Leo, Modeling of electromechanical charge sensing in ionic polymer transducers, Mechanics of Materials, vol.36, issue.5-6, pp.421-433, 2004.
DOI : 10.1016/S0167-6636(03)00069-3

Y. Fotsing and X. Tan, Bias-Dependent Impedance Model for Ionic Polymer-Metal Composite Actuators, ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 2, p.124907, 2012.
DOI : 10.1115/SMASIS2011-5011

S. Galante, A. Lucantonio, and P. Nardinocchi, The multiplicative decomposition of the deformation gradient in the multiphysics modeling of ionic polymers, International Journal of Non-Linear Mechanics, vol.51, pp.112-120, 2013.
DOI : 10.1016/j.ijnonlinmec.2013.01.005

J. Jung, J. Jeon, and V. Sridhar, Electro-active graphene???Nafion actuators, Carbon, vol.49, issue.4, pp.1279-1289, 2011.
DOI : 10.1016/j.carbon.2010.11.047

K. Jung, N. J. Choi, and H. , Investigations on actuation characteristics of IPMC artificial muscle actuator, Sensors and Actuators A: Physical, vol.107, issue.2, pp.183-192, 2003.
DOI : 10.1016/S0924-4247(03)00346-7

R. Kanno, A. Kurata, and M. Hattori, Characteristics and modeling of ICPF actuator, Proceedings of the Japan-USA symposium on flexible automation, pp.691-698, 1994.

H. Kim, D. Kim, and J. Han, Study of flapping actuator modules using IPMC, Electroactive Polymer Actuators and Devices (EAPAD) 2007, 2007.
DOI : 10.1117/12.715633

K. Kim, D. Pugal, and K. Leang, A Twistable Ionic Polymer-Metal Composite Artificial Muscle for Marine Applications, Marine Technology Society Journal, vol.45, issue.4, pp.83-98, 2011.
DOI : 10.4031/MTSJ.45.4.9

S. Kim, R. Tiwari, and K. Kim, A Novel Ionic Polymer Metal ZnO Composite (IPMZC), Sensors, vol.11, issue.12, pp.4674-4687, 2011.
DOI : 10.3390/s110504674

G. Lee, J. Choi, and M. Kim, Fabrication and reliable implementation of an ionic polymer???metal composite (IPMC) biaxial bending actuator, Smart Materials and Structures, vol.20, issue.10, p.105026, 2011.
DOI : 10.1088/0964-1726/20/10/105026

J. Lee, J. Oh, and G. Jeong, New computational model for predicting the mechanical behavior of ionic polymer metal composite (IPMC) actuators, International Journal of Precision Engineering and Manufacturing, vol.133, issue.2, pp.737-740, 2011.
DOI : 10.1016/j.sna.2006.04.037

S. Lee, H. Park, and S. Pandita, Performance improvement of IPMC for a flapping actuator, International Journal of Control, Automation and Systems, vol.4, issue.6, pp.748-755, 2006.

H. Lin, B. Fang, and M. Ju, Control of Ionic Polymer-Metal Composites for Active Catheter Systems via Linear Parameter-Varying Approach, Journal of Intelligent Material Systems and Structures, vol.10, issue.4, pp.273-282, 2009.
DOI : 10.1177/1045389X08093565

Z. Liu, M. Xu, and J. Moschetta, A review on conceptual design of nano air vehicles, CSB, vol.55, issue.34, pp.3257-3268, 2010.
DOI : 10.1360/972010-469

J. Madden, N. Vandesteeg, and P. Anquetil, Artificial Muscle Technology: Physical Principles and Naval Prospects, IEEE Journal of Oceanic Engineering, vol.29, issue.3, pp.706-728, 2004.
DOI : 10.1109/JOE.2004.833135

J. Najem, S. Sarles, and B. Akle, Biomimetic jellyfish-inspired underwater vehicle actuated by ionic polymer metal composite actuators, Smart Materials and Structures, vol.21, issue.9, p.94026, 2012.
DOI : 10.1088/0964-1726/21/9/094026

P. Nardinocchi, M. Pezzulla, and L. Placidi, Thermodynamically based multiphysic modeling of ionic polymer metal composites, Journal of Intelligent Material Systems and Structures, vol.22, issue.16, pp.1887-1897, 2011.
DOI : 10.1177/1045389X11417195

S. Nemat-nasser and Y. Wu, Comparative experimental study of ionic polymer???metal composites with different backbone ionomers and in various cation forms, Journal of Applied Physics, vol.93, issue.9, pp.5255-5267, 2003.
DOI : 10.1063/1.1563300

S. Nemat-nasser and S. Zamani, Experimental study of Nafion- and Flemion-based ionic polymer metal composites (IPMCs) with ethylene glycol as solvent, Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD), 2003.
DOI : 10.1117/12.488551

K. Newbury and D. Leo, Linear Electromechanical Model of Ionic Polymer Transducers -Part I: Model Development, Journal of Intelligent Material Systems and Structures, vol.14, issue.6, pp.333-342, 2003.
DOI : 10.1177/1045389X03034976

O. Halloran, A. , O. Malley, F. Mchugh, and P. , A review on dielectric elastomer actuators, technology, applications, and challenges, Journal of Applied Physics, vol.104, issue.7, p.71101, 2008.
DOI : 10.1063/1.2981642

M. Porfiri, Charge dynamics in ionic polymer metal composites, Journal of Applied Physics, vol.104, issue.10, pp.104915-104916, 2008.
DOI : 10.1063/1.3017467

M. Porfiri, An electromechanical model for sensing and actuation of ionic polymer metal composites, Smart Materials and Structures, vol.18, issue.1, p.15016, 2009.
DOI : 10.1088/0964-1726/18/1/015016

M. Porfiri, Influence of electrode surface roughness and steric effects on the nonlinear electromechanical behavior of ionic polymer metal composites, Physical Review E, vol.79, issue.4, p.41503, 2009.
DOI : 10.1103/PhysRevE.79.041503

D. Pugal, K. Jung, and A. Aabloo, Ionic polymer-metal composite mechanoelectrical transduction: review and perspectives, Polymer International, vol.131, issue.3, pp.279-289, 2010.
DOI : 10.1002/pi.2759

J. Rodrigues, R. Almeida, and J. Dente, Review of Recent Patents with Applications of Ionic Polymer-Metal Composites (IPMCs), Recent Patents on Electrical Engineeringe, vol.4, issue.1, pp.10-15, 2011.
DOI : 10.2174/1874476111104010010

M. Shahinpoor, Ionic polymer???conductor composites as biomimetic sensors, robotic actuators and artificial muscles???a review, Electrochimica Acta, vol.48, issue.14-16, pp.14-16, 2003.
DOI : 10.1016/S0013-4686(03)00224-X

M. Shahinpoor and K. Kim, Ionic polymer-metal composites: I. Fundamentals, Smart Materials and Structures, vol.10, issue.4, pp.819-833, 2001.
DOI : 10.1088/0964-1726/10/4/327

M. Shahinpoor and K. Kim, Ionic polymer???metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial muscles, Smart Materials and Structures, vol.13, issue.6, pp.1362-1388, 2004.
DOI : 10.1088/0964-1726/13/6/009

M. Shahinpoor and K. Kim, Ionic polymer???metal composites: IV. Industrial and medical applications, Smart Materials and Structures, vol.14, issue.1, pp.197-214, 2005.
DOI : 10.1088/0964-1726/14/1/020

M. Shahinpoor, Y. Bar-cohen, and J. Simpson, Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles - a review, Smart Materials and Structures, vol.7, issue.6, pp.15-30, 1998.
DOI : 10.1088/0964-1726/7/6/001

B. Tang, Probe into application of three parameter method, Materials Science Edition, vol.25, issue.9, pp.81-84, 2003.

S. Timoshenko, History of Strength of Materials, 1953.

R. Tiwari and K. Kim, IPMC as a mechanoelectric energy harvester: tailored properties, Smart Materials and Structures, vol.22, issue.1, p.15017, 2013.
DOI : 10.1088/0964-1726/22/1/015017

D. Truong, K. Ahnl, and D. Nam, Identification of a nonlinear black-box model for a self-sensing polymer metal composite actuator, Smart Materials and Structures, vol.19, issue.8, p.85015, 2010.
DOI : 10.1088/0964-1726/19/8/085015

M. Vahabi, E. Mehdizadeh, and M. Kabganian, Experimental identification of IPMC actuator parameters through incorporation of linear and nonlinear least squares methods, Sensors and Actuators A: Physical, vol.168, issue.1, pp.140-148, 2011.
DOI : 10.1016/j.sna.2011.03.034

T. Wallmersperger, D. Leo, and C. Kothera, Transport modeling in ionomeric polymer transducers and its relationship to electromechanical coupling, Journal of Applied Physics, vol.101, issue.2, p.24912, 2007.
DOI : 10.1063/1.2409362

Y. Xiao and K. Bhattacharya, Modeling electromechanical properties of ionic polymers, Smart Structures and Materials 2001: Electroactive Polymer Actuators and Devices, pp.292-300, 2001.
DOI : 10.1117/12.432658

S. Yeom and I. Oh, A biomimetic jellyfish robot based on ionic polymer metal composite actuators, Smart Materials and Structures, vol.18, issue.8, p.85002, 2009.
DOI : 10.1088/0964-1726/18/8/085002

W. Yim, M. Trabia, and J. Renno, Dynamic Modeling of Segmented Ionic Polymer Metal Composite (IPMC) Actuator, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.9-15, 2006.
DOI : 10.1109/IROS.2006.282177

G. Yun, H. Kim, and K. J. , Blocked force measurement of an electro-active paper actuator using a cantilevered force transducer, Smart Materials and Structures, vol.17, issue.2, p.25021, 2008.
DOI : 10.1088/0964-1726/17/2/025021

S. Yun, J. Kim, and C. Song, Performance of Electro-active paper actuators with thickness variation, Sensors and Actuators A: Physical, vol.133, issue.1, pp.225-230, 2007.
DOI : 10.1016/j.sna.2006.03.007

U. Zangrilli and L. Weiland, Prediction of the ionic polymer transducer sensing of shear loading, Smart Materials and Structures, vol.20, issue.9, p.94013, 2011.
DOI : 10.1088/0964-1726/20/9/094013

W. Zhang, S. Guo, and B. Liu, A new type of hybrid fish-like microrobot, International Journal of Automation and Computing, vol.116, issue.1, pp.358-365, 2006.
DOI : 10.1007/s11633-006-0358-4