E. J. Abbott and F. A. Firestone, Specifying surface quality, Mech. Eng, vol.55, p.569, 1933.

K. L. Woo and T. R. Thomas, Contact of rough surfaces: a review of experimental work, Wear, vol.58, issue.2, pp.331-340, 1980.

K. L. Johnson, Contact Mechanics, 1987.

W. Wang, P. L. Wong, J. B. Luo, and Z. Zhang, A new optical measurement on moving surface, Tribol. Int, vol.31, issue.5, pp.281-287, 1998.

W. Wang, P. L. Wong, and Z. Zhang, Experimental study of the real time change in surface roughness during running-in for PEHL contacts, Wear, vol.244, issue.1-2, pp.140-146, 2000.

B. Bhushan, Surface roughness analysis and measurement techniques, Modern Tribology Handbook, vol.1, pp.49-119, 2001.

J. Horng, M. Len, and J. Lee, The contact characteristics of rough surfaces in line contact during running-in process, Wear, vol.253, pp.899-913, 2002.

J. Jounini, P. Revel, P. Mazeran, and M. Bigerelle, The ability of precision hard turning to increase rolling contact fatigue life, Tribol. Int, vol.59, pp.141-146, 2013.

J. A. Greenwood and J. B. Williamson, Contact of nominally flat surfaces, vol.109, pp.618-626, 1966.

J. A. Greenwood and J. J. Wu, Surface roughness and contact: an apology, Meccanica, vol.36, issue.6, pp.617-630, 2001.

B. Persson, O. Albohr, U. Tartaglino, A. Volokitin, and E. Tosatti, On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion, J. Phys.: Condens. Matter, vol.17, issue.1, pp.1-62, 2005.

C. Vallet, D. Lasseux, H. Zahouani, and P. Sainsot, Sampling effect on contact and transport properties between fractal surfaces, Tribol. Int, vol.42, issue.8, pp.2-114, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00413318

L. Li, I. Etsion, and F. E. Talke, Elastic-plastic spherical contact modeling including roughness effects, Tribol. Lett, vol.40, issue.3, pp.357-363, 2010.
DOI : 10.1007/s11249-010-9716-z
URL : https://link.springer.com/content/pdf/10.1007%2Fs11249-010-9716-z.pdf

R. L. Jackson and I. Green, A statistical model of elasto-plastic asperity contact between rough surfaces, Tribol. Int, vol.39, issue.9, pp.906-914, 2006.

M. Ciavarella, J. A. Greenwood, and M. Paggi, Inclusion of interaction in the Greenwood and Williamson contact theory, Wear, vol.265, issue.5, pp.729-734, 2008.

K. Komvopoulos and D. H. Choi, Elastic finite element analysis of muli-asperity contacts, ASME J. Tribol, vol.114, pp.823-831, 1992.
DOI : 10.1115/1.2920955

J. J. Kalker, Three-Dimensional Elastic Bodies in Rolling Contact, p.314, 1990.
DOI : 10.1115/1.2900773
URL : http://appliedmechanics.asmedigitalcollection.asme.org/data/journals/jamcav/26347/255_1.pdf

D. A. Hills, D. Nowell, and A. Sackfield, Chapter 14-rough contacts and numerical methods, Mechanics of Elastic Contacts, pp.392-438, 1993.
DOI : 10.1016/b978-0-7506-0540-3.50017-9

J. Yonqing and Z. Linqing, A full numerical solution for the elastic contact of three dimensional real rough surfaces, Wear, vol.157, pp.151-161, 1992.

M. N. Webster and R. S. Sayles, A numerical model for the elastic frictonless contact of real rough surfaces, ASME J. Tribol, vol.108, pp.314-320, 1986.

T. Nogi and T. Kato, Influence of a hard surface layer on the limit of elastic contact-Part I: analysis using a real surface model, ASME J. Tribol, vol.119, pp.493-500, 1997.

I. A. Polonsky and L. M. Keer, A fast and accurate method for numerical analysis of elastic layered contacts, ASME J. Tribol, vol.122, pp.30-35, 2000.

P. Sainsot and A. A. Lubrecht, Efficient solution of the dry contact of rough surfaces: a comparison of FFT and MG methods, Proc. IMechE Part J, J. Eng. Tribol, vol.225, issue.6, pp.441-448, 2011.

P. Sainsot, Analytical stresses in rough contacts, Proc. IMechE Part C, vol.225, pp.274-279, 2011.
DOI : 10.1243/09544062jmes2300
URL : https://hal.archives-ouvertes.fr/hal-00610190

C. Jacq, D. Nelias, G. Lormand, and D. Girodin, Development of three-dimensional semi-analytical elastic-plastic contact code, ASME J. Tribol, vol.124, pp.653-667, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00454903

P. Sainsot, C. Jacq, and D. Nélias, A numerical model for elastoplastic rough contact, Computer Modeling in Engineering and Sciences, vol.4, pp.497-506, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00454931

F. Wang and L. M. Keer, Numerical simulation for three dimensional elastic-plastic contact with hardening behavior, ASME J. Tribol, vol.127, pp.494-502, 2005.
DOI : 10.1115/1.1924573

T. Chaise and D. Nelias, Contact pressure and residual strain in 3d elasto-plastic rolling contact for a circular or elliptical point contact, J. Tribol, vol.133, issue.4, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00760342

K. D. Van and M. H. Maitournam, Steady-state flow in classical elastoplasticity: applications to repeated rolling and sliding contact, J. Mech. Phys. Solids, vol.41, issue.11, pp.1691-1710, 1993.

K. D. Van and M. H. Maitournam, On some recent trends in modelling of contact fatigue and wear in rail, Wear, vol.253, pp.219-227, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00111361

V. A. Yastrebov, J. Durand, H. Proudhon, and G. Cailletaud, Rough surface contact analysis by means of the finite element method and of a new reduced model, C. R. Méc, vol.339, issue.7-8, pp.473-490, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00624090

L. Pei, S. Hyun, J. F. Molinari, and M. O. Robbins, November finite element modeling of elasto-plastic contact between rough surfaces, J. Mech. Phys. Solids, vol.53, issue.11, pp.2385-2409, 2005.

K. Poulios and P. Klit, Implementation and applications of a finite-element model for the contact between rough surfaces, Wear, vol.303, issue.1, pp.1-8, 2013.

M. J. Bryant, H. P. Evans, and R. W. Snidle, Plastic deformation in rough surface line contact-a finite element study, Tribol. Int, vol.46, issue.1, pp.269-278, 2012.

Y. Jiang, B. Xu, and H. Sehitoglu, Three-dimensional elastic-plastic stress analysis of rolling contact, ASME J. Tribol, vol.124, issue.4, pp.699-708, 2002.

C. J. Hooke and K. Y. Li, An experimental study of the relationship between surface roughness and stress in EHL contacts, Tribol. Interface Eng. Ser, vol.38, pp.735-746, 2000.

C. Mayeur, P. Sainsot, and L. Flamand, A numerical elastoplastic model for rough contact, ASME J. Tribol, vol.117, issue.3, pp.422-429, 1995.

J. Zarka, J. J. Engel, and G. Inglebert, On a simplified inelastic analysis of structures, Nucl. Eng. Des, vol.57, pp.333-368, 1980.

G. Inglebert, J. Frelat, and J. M. Proix, Structures under cyclic loading, Arch. Mech, vol.37, issue.4-5, pp.365-382, 1985.

G. Inglebert and J. Frelat, Quick analysis of inelastic structures using a simplified method, Nucl. Eng. Des, vol.116, issue.3, pp.281-291, 1989.

A. Kapoor and K. L. Johnson, Effect of changes in contact geometry on shakedown of surfaces in rolling/sliding contact, Int. Mech. Sci, vol.34, issue.3, pp.223-239, 1992.

Y. Kadin, Y. Kligerman, and I. Etsion, Multiple loading-unloading of an elasticplastic spherical contact, Int. J. Solids Struct, vol.43, issue.22, pp.7119-7127, 2006.

L. Li, A. Ovcharenko, I. Etsion, and F. Talke, The effect of asperity flattening during cyclic normal loading of a rough spherical contact, Tribol. Lett, vol.40, issue.3, pp.347-355, 2010.