A. Antoniadis, C. Savakis, N. Bilalis, and A. Balouktsis, Prediction of Surface Topomorphy and Roughness in Ball-End Milling, The International Journal of Advanced Manufacturing Technology, vol.21, issue.12, pp.965-971, 2003.
DOI : 10.1007/s00170-002-1418-8

M. Arizmendi, J. Fernández, L. De-lacalle, A. Lamikiz, A. Gil et al., Model development for the prediction of surface topography generated by ball-end mills taking into account the tool parallel axis offset. Experimental validation, CIRP Annals - Manufacturing Technology, vol.57, issue.1, pp.101-104, 2008.
DOI : 10.1016/j.cirp.2008.03.045

J. Aurich, O. Braun, G. Warnecke, and L. Cronjäger, Development of a Superabrasive Grinding Wheel With Defined Grain Structure Using Kinematic Simulation, CIRP Annals - Manufacturing Technology, vol.52, issue.1, pp.275-280, 2003.
DOI : 10.1016/S0007-8506(07)60583-6

J. Berglund, C. Brown, B. Rosén, and N. Bay, Milled die steel surface roughness correlation with steel sheet friction, CIRP Annals - Manufacturing Technology, vol.59, issue.1, pp.577-580, 2010.
DOI : 10.1016/j.cirp.2010.03.140

K. Bouzakis, P. Aichouh, and K. Efstathiou, Determination of the chip geometry, cutting force and roughness in free form surfaces finishing milling, with ball end tools, International Journal of Machine Tools and Manufacture, vol.43, issue.5, pp.499-514, 2003.
DOI : 10.1016/S0890-6955(02)00265-1

I. Buj-corral, J. Vivancos-calvet, and A. Domínguez-fernández, Surface topography in ball-end milling processes as a function of feed per tooth and radial depth of cut, International Journal of Machine Tools and Manufacture, vol.53, issue.1, pp.151-159, 2012.
DOI : 10.1016/j.ijmachtools.2011.10.006

B. Denkena, V. Böß, D. Nespor, and A. Samp, Kinematic and Stochastic Surface Topography of Machined TiAl6V4-Parts by means of Ball Nose End Milling, 1st CIRP Conference on Surface Integrity (CSI), pp.81-87, 2011.
DOI : 10.1016/j.proeng.2011.11.083

T. Gao, W. Zhang, K. Qiu, and M. Wan, Numerical Simulation of Machined Surface Topography and Roughness in Milling Process, Journal of Manufacturing Science and Engineering, vol.128, issue.1, pp.96-103, 2005.
DOI : 10.1115/1.2123047

N. Guillemot, C. Lartigue, R. Billardon, and B. Mawussi, Prediction of the endurance limit taking account of the microgeometry after finishing milling, International Journal on Interactive Design and Manufacturing (IJIDeM), vol.27, issue.2, pp.239-249, 2010.
DOI : 10.1007/s12008-010-0104-6

I. Inasaki, Grinding Process Simulation Based on the Wheel Topography Measurement, CIRP Annals - Manufacturing Technology, vol.45, issue.1, pp.347-350, 1996.
DOI : 10.1016/S0007-8506(07)63077-7

B. Kim and C. Chu, Texture prediction of milled surfaces using texture superposition method, Computer-Aided Design, vol.31, issue.8, pp.485-494, 1999.
DOI : 10.1016/S0010-4485(99)00045-7

S. Lavernhe, C. Tournier, and C. Lartigue, Kinematical performance prediction in multi-axis machining for process planning optimization, The International Journal of Advanced Manufacturing Technology, vol.53, issue.1, pp.534-544, 2008.
DOI : 10.1007/s00170-007-1001-4
URL : https://hal.archives-ouvertes.fr/hal-00373706

S. Lavernhe, Y. Quinsat, and C. Lartigue, Model for the prediction of 3D surface topography in 5-axis milling, The International Journal of Advanced Manufacturing Technology, vol.37, issue.9-12, pp.9-12915, 2010.
DOI : 10.1007/s00170-010-2686-3
URL : https://hal.archives-ouvertes.fr/hal-00538108

N. Liu, M. Loftus, and A. Whitten, Surface finish visualisation in high speed, ball nose milling applications, International Journal of Machine Tools and Manufacture, vol.45, issue.10, pp.1152-1161, 2005.
DOI : 10.1016/j.ijmachtools.2004.12.007

D. Novovic, R. Dewes, D. Aspinwall, W. Voice, and P. Bowen, The effect of machined topography and integrity on fatigue life, International Journal of Machine Tools and Manufacture, vol.44, issue.2-3, pp.125-134, 2004.
DOI : 10.1016/j.ijmachtools.2003.10.018

Y. Quinsat, L. Sabourin, and C. Lartigue, Surface topography in ball end milling process: Description of a 3D surface roughness parameter, Journal of Materials Processing Technology, vol.195, issue.1-3, pp.135-143, 2008.
DOI : 10.1016/j.jmatprotec.2007.04.129
URL : https://hal.archives-ouvertes.fr/hal-01154042

Y. Quinsat, S. Lavernhe, and C. Lartigue, Characterization of 3D surface topography in 5-axis milling, the 12th International Conference on Metrology and Properties of Engineering Surfaces, pp.590-595, 2011.
DOI : 10.1016/j.wear.2010.05.014
URL : https://hal.archives-ouvertes.fr/hal-00999713

A. Souto-lebel, N. Guillemot, C. Lartigue, and R. Billardon, Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life, 1st CIRP Conference on Surface Integrity (CSI), pp.343-348, 2011.
DOI : 10.1016/j.proeng.2011.11.123