The contribution of grain boundary barriers to the electrical conductivity of titanium oxide thin films

Nicolas Martin (1) , Aurélien Besnard (1) , Fabrice Stahl (1) , Corinne Nouveau (2)

1 FEMTO-ST - Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174)
2 LABOMAP - Laboratoire Bourguignon des Matériaux et Procédés

Titanium oxide thin films were prepared by reactive magnetron sputtering. The reactive gas pulsing process was implemented to control the oxygen injection in the deposition process and,consequently, to tune the oxygen concentration in the films from pure titanium to stoichiometric TiO2, maintaining a homogeneous in-depth concentration. The electrical conductivity of the films was investigated as a function of the oxygen injection time, the metalloid concentration and temperature, in the range 90-600 K. The curved Arrhenius plots of the conductivity were examined taking into account the grain boundary limited transport model of Werner J. H. Werner Solid State Phenom. 37-38, 213 1994 . The grain barrier heights were found to depend significantly on the oxygen supplied into the deposition process and thus, on the oxygen-to-titanium atomic ratio in the films. The analysis as a function of temperature showed that the conduction mechanism in the coatings was not solely limited by the oxygen-to-titanium atomic ratio, but also by the grain boundary scattering.

Mots clés: reactive magnetron sputtering; TiO2; electrical conductivity; oxygen injection time; metalloid concentration and temperature variation; grain barrier

Domaines: Matériaux; Supraconductivité [cond-mat.supr-con]; Matériaux; Plasmas

Nicolas Martin, Aurélien Besnard, Fabrice Stahl, Corinne Nouveau. The contribution of grain boundary barriers to the electrical conductivity of titanium oxide thin films. Applied Physics Letters, 2008, 93 (6), pp.064102-3. ⟨10.1063/1.2970034⟩. ⟨hal-00981143⟩