V. Sokolinsky, K. Indermuehle, and J. Hurtado, Numerical simulation of the crushing process of a corrugated composite plate, Composites Part A: Applied Science and Manufacturing, vol.42, issue.9, pp.1119-1145, 2011.
DOI : 10.1016/j.compositesa.2011.04.017

P. Feraboli, B. Wade, F. Deleo, M. Rassaian, M. Higgins et al., LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen, Composites Part A: Applied Science and Manufacturing, vol.42, issue.11, pp.1809-1834, 2011.
DOI : 10.1016/j.compositesa.2011.08.004

X. Xiao, C. Mcgregor, R. Vaziri, and A. Poursartip, Progress in braided composite tube crush simulation, International Journal of Impact Engineering, vol.36, issue.5, pp.711-720, 2009.
DOI : 10.1016/j.ijimpeng.2008.09.006

D. Fleming, C. Morrow, C. Clarke, and C. Bird, Finite Element Simulation of Delamination with Application to Crashworthy Design, Journal of the American Helicopter Society, vol.53, issue.3, 2006.
DOI : 10.4050/JAHS.53.267

C. Mcgregor, R. Vaziri, and X. X. , Simulation of progressive damage development in braided composite tubes under axial compression, Composites Part A: Applied Science and Manufacturing, vol.38, issue.11, pp.2247-59, 2007.
DOI : 10.1016/j.compositesa.2006.10.007

S. Pinho, P. Camanho, and M. De-moura, Numerical simulation of the crushing process of composite materials, International Journal of Crashworthiness, vol.14, issue.3, pp.263-76, 2004.
DOI : 10.1016/S0266-3538(98)00069-4

G. Farley and R. Jones, Energy-absorption capability of composite tubes and beams, 1989.

A. Mamalis, M. Robinson, D. Manolakos, G. Demosthenous, M. Ioannidis et al., Crashworthy capability of composite material structures, Composite Structures, vol.37, issue.2, pp.109-143, 1997.
DOI : 10.1016/S0263-8223(97)80005-0

L. Greve, A. Pickett, and F. Payen, Experimental testing and phenomenological modelling of the fragmentation process of braided carbon/epoxy composite tubes under axial and oblique impact, Composites Part B: Engineering, vol.39, issue.7-8, pp.7-81221, 2008.
DOI : 10.1016/j.compositesb.2008.02.002

S. Nixon and G. Barnes, Effective crushing simulation for composite structures. ICCM-17, 2009.

. Fig, The evolution of energy absorbed through various mechanisms during crushing tests of (a) medium-scale quasi-static and (b) dynamic plate crushing (9 m/s). (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.) [11] Laurea ARM. Finite element investigations on the microstructure of composite materials, 2007.

P. Ladevéze and G. Lubineau, On a damage mesomodel for laminates, Composites Science and Technology, vol.61, issue.15, pp.2149-58, 2001.
DOI : 10.1016/S0266-3538(01)00109-9

D. Guillon, S. Rivallant, J. Barrau, C. Petiot, P. Thevenet et al., Experimental and numerical study of the splaying mode crush of CFRP laminates. ICCM-17, 2009.

A. Duong, S. Rivallant, J. Barrau, C. Petiot, and B. Malherbe, Influence of speed on the crushing behavior of composite plates, 2010.

H. Israr, S. Rivallant, and J. Barrau, Experimental investigation on mean crushing stress characterization of carbon???epoxy plies under compressive crushing mode, Composite Structures, vol.96, pp.357-64, 2013.
DOI : 10.1016/j.compstruct.2012.09.022
URL : https://hal.archives-ouvertes.fr/hal-00784973

P. Prombut, Caractérisation de la propagation de délaminage des stratifiés composites multidirectionnels, 2007.

S. Pinho, P. Robinson, and L. Iannucci, Fracture toughness of the tensile and compressive fibre failure modes in laminated composites, Composites Science and Technology, vol.66, issue.13, pp.2069-79, 2006.
DOI : 10.1016/j.compscitech.2005.12.023

N. Hongkarnjanakul, C. Bouvet, and S. Rivallant, Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure, Composite Structures, vol.106, pp.549-59, 2013.
DOI : 10.1016/j.compstruct.2013.07.008
URL : https://hal.archives-ouvertes.fr/hal-00858522

A. Matzenmiller and K. Schwizerhof, Crashworthiness simulations of composites structures ? a first step with explicit time integration, Non-linear computational/mechanics ? state of the art, pp.642-70, 1991.

A. Mamalis, D. Manolakos, M. Ioannidis, and D. Papapostolou, The static and dynamic axial collapse of CFRP square tubes: Finite element modelling, Composite Structures, vol.74, issue.2, pp.213-248, 2006.
DOI : 10.1016/j.compstruct.2005.04.006

C. Bouvet, S. Rivallant, and J. Barrau, Low velocity impact modeling in composite laminates capturing permanent indentation, Composites Science and Technology, vol.72, issue.16, pp.1977-88, 2012.
DOI : 10.1016/j.compscitech.2012.08.019

Z. Bazant, B. Oh, C. Davila, and M. De-moura, Crack band theory for fracture of concrete Numerical simulation of mixed-mode progressive delamination in composite, Mater Struct J Compos Mater, vol.1637, issue.16, pp.155-177, 1983.

P. Camanho, C. Davila, and M. De-moura, Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials, Journal of Composite Materials, vol.37, issue.16, pp.1415-1453, 2003.
DOI : 10.1177/0021998303034505