E. Ozturk, L. T. Tunc, and E. Budak, Investigation of lead and tilt angle effects in 5-axis ball-end milling processes, International Journal of Machine Tools and Manufacture, vol.49, issue.14, pp.1053-1062, 2009.
DOI : 10.1016/j.ijmachtools.2009.07.013

Y. Quinsat, S. Lavernhe, and C. Lartigue, Characterization of 3D surface topography in 5-axis milling, Wear, vol.271, issue.3-4, pp.590-595, 2011.
DOI : 10.1016/j.wear.2010.05.014
URL : https://hal.archives-ouvertes.fr/hal-00999713

X. Pessoles, Y. Landon, and W. Rubio, Kinematic modelling of a 3-axis NC machine tool in linear and circular interpolation, The International Journal of Advanced Manufacturing Technology, vol.44, issue.12???13, pp.639-655, 2010.
DOI : 10.1007/s00170-009-2236-z
URL : https://hal.archives-ouvertes.fr/hal-00466700

Y. Altintas and E. Budak, Analytical Prediction of Stability Lobes in Milling, CIRP Annals - Manufacturing Technology, vol.44, issue.1, pp.357-362, 1995.
DOI : 10.1016/S0007-8506(07)62342-7

S. A. Tobias and W. Fishwick, Theory of regenerative machine tool chatter, Engineer, vol.205, pp.199-203, 1958.

E. Budak, Analytical models for high performance milling. Part I: Cutting forces, structural deformations and tolerance integrity, International Journal of Machine Tools and Manufacture, vol.46, issue.12-13, pp.1478-1488, 2006.
DOI : 10.1016/j.ijmachtools.2005.09.009

E. Budak, Analytical models for high performance milling. Part II: Process dynamics and stability, International Journal of Machine Tools and Manufacture, vol.46, issue.12-13, pp.1489-1499, 2006.
DOI : 10.1016/j.ijmachtools.2005.09.010

M. A. Davies, J. R. Pratt, B. Dutterer, and T. J. Burns, Stability Prediction for Low Radial Immersion Milling, Journal of Manufacturing Science and Engineering, vol.124, issue.2, pp.217-225, 2002.
DOI : 10.1115/1.1455030

P. V. Bayly, J. E. Halley, B. P. Mann, and M. A. Davies, Stability of Interrupted Cutting by Temporal Finite Element Analysis, Journal of Manufacturing Science and Engineering, vol.125, issue.2, pp.220-225, 2003.
DOI : 10.1115/1.1556860

T. Insperger and G. Stepan, Updated semi-discretization method for periodic delay-differential equations with discrete delay, International Journal for Numerical Methods in Engineering, vol.61, issue.1, pp.117-141, 2004.
DOI : 10.1002/nme.1061

T. Insperger, B. P. Mann, T. Surmann, and G. Stepan, On the chatter frequencies of milling processes with runout, International Journal of Machine Tools and Manufacture, vol.48, issue.10, pp.1081-1089, 2008.
DOI : 10.1016/j.ijmachtools.2008.02.002

M. Zatarain, J. Munoa, G. Peigne, and T. Insperger, Analysis of the Influence of Mill Helix Angle on Chatter Stability, CIRP Annals - Manufacturing Technology, vol.55, issue.1, pp.365-368, 2006.
DOI : 10.1016/S0007-8506(07)60436-3

G. Stepan, R. Szalai, B. P. Mann, P. V. Bayly, T. Insperger et al., Nonlinear Dynamics of High-Speed Milling???Analyses, Numerics, and Experiments, Journal of Vibration and Acoustics, vol.127, issue.2, pp.197-203, 2005.
DOI : 10.1115/1.1891818

T. Insperger, J. Gradisek, M. Kalveram, G. Stepan, K. Weinert et al., Machine Tool Chatter and Surface Location Error in Milling Processes, Journal of Manufacturing Science and Engineering, vol.128, issue.4, pp.913-920, 2006.
DOI : 10.1115/1.2280634

S. Seguy, T. Insperger, L. Arnaud, G. Dessein, and G. Peigne, SUPPRESSION OF PERIOD DOUBLING CHATTER IN HIGH-SPEED MILLING BY SPINDLE SPEED VARIATION, Machining Science and Technology, vol.205, issue.2, pp.153-171, 2011.
DOI : 10.1504/IJMMM.2009.023116

T. Insperger, G. Stepan, and J. Turi, On the higher-order semi-discretizations for periodic delayed systems, Journal of Sound and Vibration, vol.313, issue.1-2, pp.334-341, 2008.
DOI : 10.1016/j.jsv.2007.11.040

J. Gradisek, M. Kalveram, T. Insperger, K. Weinert, G. Stepan et al., On stability prediction for milling, International Journal of Machine Tools and Manufacture, vol.45, issue.7-8, pp.769-781, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.015

F. Lapujoulade, T. Mabrouki, and K. Raissi, Pr??diction du comportement vibratoire du fraisage lat??ral de finition des pi??ces ?? parois mincesVibratory behavior prediction of thin-walled parts during lateral finish milling, M??canique & Industries, vol.3, issue.4, pp.403-418, 2002.
DOI : 10.1016/S1296-2139(02)01179-X

M. L. Campomanes and Y. Altintas, An Improved Time Domain Simulation for Dynamic Milling at Small Radial Immersions, Journal of Manufacturing Science and Engineering, vol.125, issue.3, pp.416-422, 2003.
DOI : 10.1115/1.1580852

X. Liu and K. Cheng, Modelling the machining dynamics of peripheral milling, International Journal of Machine Tools and Manufacture, vol.45, issue.11, pp.1301-1320, 2005.
DOI : 10.1016/j.ijmachtools.2005.01.019

T. Surmann and D. Enk, Simulation of milling tool vibration trajectories along changing engagement conditions, International Journal of Machine Tools and Manufacture, vol.47, issue.9, pp.1442-1448, 2007.
DOI : 10.1016/j.ijmachtools.2006.09.030

L. Arnaud, O. Gonzalo, S. Seguy, H. Jauregi, and G. Peigne, Simulation of low rigidity part machining applied to thin-walled structures, The International Journal of Advanced Manufacturing Technology, vol.47, issue.199???203, pp.479-488, 2011.
DOI : 10.1007/s00170-010-2976-9
URL : https://hal.archives-ouvertes.fr/hal-00767641

P. Lorong, G. Coffignal, E. Balmes, M. Guskov, and A. Texier, Simulation of a Finishing Operation: Milling of a Turbine Blade and Influence of Damping, Volume 4: Advanced Manufacturing Processes; Biomedical Engineering; Multiscale Mechanics of Biological Tissues; Sciences, Engineering and Education; Multiphysics; Emerging Technologies for Inspection, 2012.
DOI : 10.1115/ESDA2012-82534
URL : https://hal.archives-ouvertes.fr/hal-01082886

S. Seguy, G. Dessein, and L. Arnaud, Surface roughness variation of thin wall milling, related to modal interactions, International Journal of Machine Tools and Manufacture, vol.48, issue.3-4, pp.261-274, 2008.
DOI : 10.1016/j.ijmachtools.2007.09.005
URL : https://hal.archives-ouvertes.fr/hal-00748570

K. Ahmadi and F. Ismail, Analytical stability lobes including nonlinear process damping effect on machining chatter, International Journal of Machine Tools and Manufacture, vol.51, issue.4, pp.296-308, 2011.
DOI : 10.1016/j.ijmachtools.2010.12.008

K. Ahmadi and F. Ismail, Machining chatter in flank milling, International Journal of Machine Tools and Manufacture, vol.50, issue.1, pp.75-85, 2010.
DOI : 10.1016/j.ijmachtools.2009.09.005

E. Budak, E. Ozturk, and L. T. Tunc, Modeling and simulation of 5-axis milling processes, CIRP Annals - Manufacturing Technology, vol.58, issue.1, pp.347-350, 2009.
DOI : 10.1016/j.cirp.2009.03.044

E. Shamoto and K. Akazawa, Analytical prediction of chatter stability in ball end milling with tool inclination, CIRP Annals - Manufacturing Technology, vol.58, issue.1, pp.351-354, 2009.
DOI : 10.1016/j.cirp.2009.03.087

S. Engin and Y. Altintas, Mechanics and dynamics of general milling cutters., International Journal of Machine Tools and Manufacture, vol.41, issue.15, pp.2213-2231, 2001.
DOI : 10.1016/S0890-6955(01)00046-3

H. Paris, D. Brissaud, and A. Gouskov, A More Realistic Cutting Force Model at Uncut Chip Thickness Close to Zero, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.415-418, 2007.
DOI : 10.1016/j.cirp.2007.05.096
URL : https://hal.archives-ouvertes.fr/hal-00181779

V. Thevenot, L. Arnaud, G. Dessein, and G. , Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling, The International Journal of Advanced Manufacturing Technology, vol.27, issue.7-8, pp.638-644, 2006.
DOI : 10.1007/s00170-004-2241-1
URL : https://hal.archives-ouvertes.fr/hal-00800292

]. S. Seguy, F. J. Campa, L. N. Lopez-de-lacalle, L. Arnaud, G. Dessein et al., Toolpath dependent stability lobes for the milling of thin-walled parts, International Journal of Machining and Machinability of Materials, vol.4, issue.4, pp.377-392, 2008.
DOI : 10.1504/IJMMM.2008.023720
URL : https://hal.archives-ouvertes.fr/hal-00963033

Y. Landon, S. Segonds, M. Mousseigne, and P. Lagarrigue, Correction of milling tool paths by Tool Positioning Defect (TPD) compensation, Institution of Mechanical Engineers (I MECH E) Part B?Journal of Engineering Manufacture, pp.217-1063, 2003.

S. Segonds, Y. Landon, F. Monies, and P. Lagarrigue, Method for rapid characterisation of cutting forces in end milling considering runout, International Journal of Machining and Machinability of Materials, vol.1, issue.1, pp.45-61, 2006.
DOI : 10.1504/IJMMM.2006.010658