Skip to Main content Skip to Navigation
Journal articles

Vector control method applied to a traveling wave in a finite beam

Abstract : This paper presents the closed-loop control of exciters to produce a traveling wave in a finite beam. This control is based on a dynamical modeling of the system established in a rotating reference frame. This method allows dynamic and independent control of the phase and amplitude of two vibration modes. The condition to obtain the traveling wave is written in this rotating frame, and requires having two vibration modes with the same amplitude, and imposing a phase shift of 90° between them. The advantage of the method is that it allows easy implementation of a closed loop control that can handle parameter drift of the system, after a temperature rise, for example. The modeling is compared with measurement on an experimental test bench which also implements real-time control. We managed to experimentally obtain a settling time of 250 ms for the traveling wave, and a standing wave ratio (SWR) of 1.3.
Complete list of metadata

Cited literature [12 references]  Display  Hide  Download
Contributor : Compte de Service Administrateur Ensam Connect in order to contact the contributor
Submitted on : Wednesday, February 15, 2017 - 4:52:25 PM
Last modification on : Saturday, December 18, 2021 - 3:05:12 AM
Long-term archiving on: : Tuesday, May 16, 2017 - 12:23:37 PM


Files produced by the author(s)



Frédéric Giraud, Christophe Giraud-Audine, Michel Amberg, Betty Lemaire-Semail. Vector control method applied to a traveling wave in a finite beam. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Institute of Electrical and Electronics Engineers, 2014, 61 (1), pp.147-158. ⟨10.1109/TUFFC.2014.6689782⟩. ⟨hal-01064859⟩



Les métriques sont temporairement indisponibles