E. Ezugwu and Z. Wang, Titanium alloys and their machinability???a review, Journal of Materials Processing Technology, vol.68, issue.3, pp.262-74, 1997.
DOI : 10.1016/S0924-0136(96)00030-1

H. Siekmann, How to machine titanium, Tool Eng, vol.34, pp.78-82, 1955.

R. Komanduri, Some clarifications on the mechanics of chip formation when machining titanium alloys, Wear, vol.76, issue.1, pp.15-34, 1982.
DOI : 10.1016/0043-1648(82)90113-2

E. Ezugwu, J. Bonney, and Y. Yamane, An overview of the machinability of aeroengine alloys, Journal of Materials Processing Technology, vol.134, issue.2, pp.233-53, 2003.
DOI : 10.1016/S0924-0136(02)01042-7

E. Ezugwu, Key improvements in the machining of difficult-to-cut aerospace superalloys, International Journal of Machine Tools and Manufacture, vol.45, issue.12-13, pp.1353-67, 2005.
DOI : 10.1016/j.ijmachtools.2005.02.003

P. Dearnley and A. Grearson, Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318, Materials Science and Technology, vol.81, issue.1, pp.47-58, 1986.
DOI : 10.1016/0043-1648(85)90210-8

P. Dearnley, A. Grearson, and J. Aucote, Wear mechanisms of cemented carbidesand ceramics used for machining titanium alloys, High Technol Ceram, vol.38, pp.2699-712, 1987.

J. Leopold, The application of visioplasticity in predictive modelling the chip flow. Tool loading and surface integrity in turning operations. 3rd CIRP international workshop on ''Modelling Of Machining Operations, 2000.

H. Bil, S. Engin, and A. Erman, A comparison of orthogonal cutting data from experiments with three different finite element models, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.933-977, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.016

T. Marusich, Effects of friction and cutting speed on cutting force, Proc ASME, pp.115-138, 2001.

Y. Donyo, Contribution à l'analyse des modes de formation du copeau en usinage grande vitesse du TA6V, 2002.

J. Limido, C. Espinosa, M. Salaün, and J. Lacome, SPH method applied to high speed cutting modelling, International Journal of Mechanical Sciences, vol.49, issue.7, pp.898-908, 2007.
DOI : 10.1016/j.ijmecsci.2006.11.005

L. Lucy, A numerical approach to the testing of fusion process, Astron J, vol.88, pp.1013-1037, 1977.

R. Gingold and J. Monaghan, Smoothed particle hydrodynamics: theory and application to non-spherical stars, Monthly Notices of the Royal Astronomical Society, vol.181, issue.3, pp.375-89, 1977.
DOI : 10.1093/mnras/181.3.375

L. Libersky and A. Petschek, Smoothed particle hydrodynamics with strength of materials, Proceedings of the next free lagrange conference, pp.248-57, 1991.

J. Monaghan, Smoothed particle hydrodynamics, Reports on Progress in Physics, vol.68, issue.8, pp.1703-59, 2005.
DOI : 10.1088/0034-4885/68/8/R01

T. Özel, The influence of friction models on finite element simulations of machining, International Journal of Machine Tools and Manufacture, vol.46, issue.5, pp.518-548, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.001

G. Johnson and W. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of 7th international symposium on ballistics, pp.541-548, 1983.

R. Kountanya and W. Endres, A high-magnification experimental study of orthogonal cutting with edge-radiused tools, Proceedings of symposium on fundamental issues in machining, pp.2001-23317, 2001.

Y. Karpat and T. Özel, An integrated analytical thermal model for orthogonal cutting with chamfered tools, Trans North Am Manuf Res Inst, vol.34, pp.611-636, 2006.

M. Calamaz, D. Coupard, M. Nouari, and F. Girot, A finite element model of high speed machining of TA6V titanium alloy, Proceedings of 6th international conference high speed machining, pp.21-22, 2007.

P. Arrazola, F. Meslin, L. Maître, F. , and M. S. , Sensitivity study in numerical cutting modelling, p.7, 2004.

H. Meyer and D. Kleponis, Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration, International Journal of Impact Engineering, vol.26, issue.1-10, pp.509-530, 2001.
DOI : 10.1016/S0734-743X(01)00107-5

D. Lesuer, M. Leblanc, and G. Kay, Modeling large-strain high rate deformation metals, 2001.

W. Lee and C. Lin, High-temperature deformation behaviour of Ti6Al4V alloy evaluated by high strain-rate compression tests, Journal of Materials Processing Technology, vol.75, issue.1-3, pp.127-163, 1998.
DOI : 10.1016/S0924-0136(97)00302-6

T. Özel and E. Zeren, Determination of work material flow stress and friction properties for FEA of machining using orthogonal cutting tests, J Mater Process Technol, vol.153154, pp.1019-1044, 2004.

Y. Yen, A. Jain, and T. Altan, A finite element analysis of orthogonal machining using different tool edge geometries, Journal of Materials Processing Technology, vol.146, issue.1, pp.72-81, 2004.
DOI : 10.1016/S0924-0136(03)00846-X