M. Merchant, Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip, Journal of Applied Physics, vol.16, issue.5, pp.267-275, 1945.
DOI : 10.1063/1.1707586

P. Oxley, Mechanics of metal cutting, International Journal of Machine Tool Design and Research, vol.1, issue.1-2, pp.50-60, 1963.
DOI : 10.1016/0020-7357(61)90046-4

E. Ceretti, P. Fallbohmer, W. Wu, and T. Altan, Application of 2D FEM to chip formation in orthogonal cutting, Journal of Materials Processing Technology, vol.59, issue.1-2, pp.169-180, 1996.
DOI : 10.1016/0924-0136(96)02296-0

M. Baker, Finite element investigation of the flow stress dependence of chip formation, Journal of Materials Processing Technology, vol.167, issue.1, pp.1-13, 2005.
DOI : 10.1016/j.jmatprotec.2004.09.076

W. Kline, R. Devor, and J. Lindberg, The prediction of cutting forces in end milling with application to cornering cuts, International Journal of Machine Tool Design and Research, vol.22, issue.1, pp.7-22, 1982.
DOI : 10.1016/0020-7357(82)90016-6

I. Yellowley, Observations on the mean values of forces, torque and specific power in the peripheral milling process, International Journal of Machine Tool Design and Research, vol.25, issue.4, pp.337-346, 1985.
DOI : 10.1016/0020-7357(85)90034-4

M. Yang and H. Park, The prediction of cutting force in ball-end milling, International Journal of Machine Tools and Manufacture, vol.31, issue.1, pp.45-54, 1991.
DOI : 10.1016/0890-6955(91)90050-D

Y. Altintas and P. Lee, A General Mechanics and Dynamics Model for Helical End Mills, CIRP Annals - Manufacturing Technology, vol.45, issue.1, pp.59-64, 1996.
DOI : 10.1016/S0007-8506(07)63017-0

S. Engin and Y. Altintas, Mechanics and dynamics of general milling cutters. Part I: helical end mills, International Journal of Machine Tools and Manufacture, vol.44, pp.2195-2212, 2001.

S. Engin and Y. Altintas, Mechanics and dynamics of general milling cutters., International Journal of Machine Tools and Manufacture, vol.41, issue.15, pp.2213-2231, 2001.
DOI : 10.1016/S0890-6955(01)00046-3

R. Zhu, S. Kapoor, and R. Devor, Mechanistic Modeling of the Ball End Milling Process for Multi-Axis Machining of Free-Form Surfaces, Journal of Manufacturing Science and Engineering, vol.123, issue.3, pp.369-379, 2001.
DOI : 10.1115/1.1369357

M. Fontaine, A. Devillez, A. Moufki, and D. Dudzinski, Predictive force model for ball-end milling and experimental validation with a wavelike form machining test, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.367-380, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.011
URL : https://hal.archives-ouvertes.fr/hal-00178459

A. Molinari and D. Dudzinski, Stationnary shear band in high speed machining, C.R, 1992.

D. Dudzinski and A. Molinari, A modelling of cutting for viscoplastic materials, International Journal of Mechanical Sciences, vol.39, issue.4, pp.369-389, 1997.
DOI : 10.1016/S0020-7403(96)00043-4

A. Moufki, A. Devillez, D. Dudzinski, and A. Molinari, Thermomechanical modelling of oblique cutting and experimental validation, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.971-989, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.018

N. Zeroudi, M. Fontaine, and K. Necib, Prediction of cutting forces in 3-axes milling of sculptured surfaces directly from CAM tool path, Journal of Intelligent Manufacturing, vol.123, issue.3, pp.1-15, 2010.
DOI : 10.1007/s10845-010-0460-x

N. Zeroudi and M. Fontaine, Prediction of Machined Surface Geometry Based on Analytical Modelling of Ball-end Milling, Procedia CIRP, vol.1, pp.108-113, 2012.
DOI : 10.1016/j.procir.2012.04.017

H. Shao, L. Liu, and H. Qu, Machinability study on 3%Co???12%Cr stainless steel in milling, Wear, vol.263, issue.1-6, pp.736-744, 2007.
DOI : 10.1016/j.wear.2007.01.074

D. Errico, G. Bugliosi, S. Guglielmi, and E. , Tool-life reliability of cermet inserts in milling tests, Journal of Materials Processing Technology, vol.77, issue.1-3, pp.337-343, 1998.
DOI : 10.1016/S0924-0136(97)00437-8

A. Maurel-pantel, M. Fontaine, S. Thibaud, and J. Gelin, 3D FEM simulations of shoulder milling operations on a 304L stainless steel, Simulation Modelling Practice and Theory, vol.22, pp.13-27, 2012.
DOI : 10.1016/j.simpat.2011.10.009
URL : https://hal.archives-ouvertes.fr/hal-00679945

Z. Tekiner and S. Yesilyurt, Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steel, Materials & Design, vol.25, issue.6, pp.507-513, 2004.
DOI : 10.1016/j.matdes.2003.12.011

O. Sullivan, D. Cotterell, and M. , Machinability of austenitic stainless steel SS303, Journal of Materials Processing Technology, vol.124, issue.1-2, pp.153-159, 2002.
DOI : 10.1016/S0924-0136(02)00197-8

A. Salak, K. Vasilko, M. Selecka, and H. Danninger, New short time face turning method for testing the machinability of PM steels, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.62-69, 2006.
DOI : 10.1016/j.jmatprotec.2006.02.014

S. Kumar, A. , R. Durai, A. Sornakumar, and T. , The effect of tool wear on tool life of alumina-based ceramic cutting tools while machining hardened martensitic stainless steel, Journal of Materials Processing Technology, vol.173, issue.2, pp.151-156, 2006.
DOI : 10.1016/j.jmatprotec.2005.11.012

T. Akasawa, H. Sakurai, M. Nakamura, T. Tanaka, and K. Takano, Effects of free cutting additives on the machinability of austenetic stainless steels, International. Journal of Materials Processing Technology, vol.143144, pp.66-71, 2003.

F. Valiorgue, J. Rech, H. Hamdi, C. Bonnet, P. Gilles et al., Modelling of friction phenomena in material removal processes, Journal of Materials Processing Technology, vol.201, issue.1-3, pp.450-453, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.266

F. Valiorgue, J. Rech, H. Hamdi, P. Gilles, and J. Bergheau, 3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel, International Journal of Machine Tools and Manufacture, vol.53, issue.1, pp.77-90, 2012.
DOI : 10.1016/j.ijmachtools.2011.09.011

C. Bonnet, F. Valiorgue, J. Rech, C. Claudin, H. Hamdi et al., Identification of a friction model???Application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool, International Journal of Machine Tools and Manufacture, vol.48, issue.11, pp.1211-1223, 2008.
DOI : 10.1016/j.ijmachtools.2008.03.011

G. Johnson and J. Cook, Constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures, Proceedings of 7th Symposium On Ballistics, 1983.

A. Maurel-pantel, G. Michel, S. Thibaud, M. Fontaine, and J. Gelin, 3D FEM simulations of milling on a 304L stainless steel, Steel Research International, vol.79, issue.2, pp.726-733, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00679945

A. Maurel, M. Fontaine, S. Thibaud, G. Michel, and J. Gelin, Inverse Method for Identification of Material Parameters Directly from Milling Experiments, AIP Conference Proceedings, pp.1435-1438, 2008.
DOI : 10.1063/1.2729601
URL : https://hal.archives-ouvertes.fr/hal-00329611

M. Fontaine, A. Devillez, and D. Dudzinski, Parametric geometry for modelling of milling operations, International Journal of Machining and Machinability of Materials, vol.2, issue.2, pp.186-205, 2007.
DOI : 10.1504/IJMMM.2007.013782
URL : https://hal.archives-ouvertes.fr/hal-00261036

A. More, W. Jiang, W. Brown, and A. Malshe, Tool wear and machining performance of cBN???TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel, Journal of Materials Processing Technology, vol.180, issue.1-3, pp.1-3253, 2006.
DOI : 10.1016/j.jmatprotec.2006.06.013

H. Chandrasekaran and J. Johansson, Chip Flow and Notch Wear Mechanisms during the Machining of High Austenitic Stainless Steels CIRP Annals -Manufacturing Technology, pp.101-105, 1994.

A. Gilbin, M. Fontaine, G. Michel, S. Thibaud, and P. Picard, Capability of tungsten carbide micro-mills to machine hardened tool steel, International Journal of Precision Engineering and Manufacturing, vol.118, issue.3, pp.23-28, 2013.
DOI : 10.1007/s12541-013-0004-3

M. Fontaine, A. Moufki, A. Devillez, and D. Dudzinski, Modelling of cutting forces in ball-end milling with tool???surface inclination, Journal of Materials Processing Technology, vol.189, issue.1-3, pp.85-96, 2007.
DOI : 10.1016/j.jmatprotec.2007.01.007
URL : https://hal.archives-ouvertes.fr/hal-00261032

N. Abukhshim, P. Mativenga, and M. Sheikh, Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining, International Journal of Machine Tools and Manufacture, vol.46, issue.7-8, pp.7-8782, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.024

K. Abou-el-hossein and Z. Yahya, High-speed end-milling of AISI 304 stainless steels using new geometrically developed carbide inserts, Journal of Materials Processing Technology, vol.162, issue.163, pp.596-602, 2005.
DOI : 10.1016/j.jmatprotec.2005.02.129