N. Hancox, An overview of the impact behavior of fibre-reinforced composites Impact behavior of fiber-reinforced composite materials and structures, 2000.

W. Cantwell and J. Morton, The impact resistance of composite materials ??? a review, Composites, vol.22, issue.5, pp.347-62, 1991.
DOI : 10.1016/0010-4361(91)90549-V

B. Jang, W. Kowbel, and B. Jang, Impact behavior and impact-fatigue testing of polymer composites, Composites Science and Technology, vol.44, issue.2, pp.107-125, 1992.
DOI : 10.1016/0266-3538(92)90103-A

S. Abrate, Impact on composites structures, 1998.
DOI : 10.1017/CBO9780511574504

G. Bibo, D. Leicy, P. Hogg, and M. Kemp, High-temperature damage tolerance of carbon fibre-reinforced plastics, Composites, vol.25, issue.6, pp.414-438, 1994.
DOI : 10.1016/0010-4361(94)90097-3

G. Bibo, P. Hogg, and M. Kemp, High-temperature damage tolerance of carbon fibre-reinforced plastics:, Composites, vol.26, issue.2, pp.91-102, 1995.
DOI : 10.1016/0010-4361(95)90408-R

B. Jang, C. Huang, C. Hsieh, W. Kowbel, and B. Jang, Repeated impact failure of continuous fiber reinforced thermoplastic and thermoset composites, J Compos Mater, vol.25, issue.9, pp.1171-203, 1991.

T. Ishikawa, S. Sugimoto, M. Matsushima, and Y. Hayashi, Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates, Composites Science and Technology, vol.55, issue.4, pp.349-63, 1995.
DOI : 10.1016/0266-3538(95)00079-8

P. Davies, L. Riou, F. Mazeas, and P. Warnier, Thermoplastic Composite Cylinders for Underwater Applications, Journal of Thermoplastic Composite Materials, vol.18, issue.5, pp.417-460, 2005.
DOI : 10.1177/0892705705054397

B. Schrauwen and T. Peijs, Influence of matrix ductility and fibre architecture on the repeated impact response of glass-fibre-reinforced laminated composites, Applied Composite Materials, vol.9, issue.6, pp.331-52, 2002.
DOI : 10.1023/A:1020267013414

J. Kim and M. Sham, Impact and delamination failure of woven-fabric composites, Composites Science and Technology, vol.60, issue.5, pp.745-61, 2000.
DOI : 10.1016/S0266-3538(99)00166-9

G. Bibo and P. Hogg, The role of reinforcement architecture on impact damage mechanisms and post-impact compression behaviour, Journal of Materials Science, vol.47, issue.1, pp.1115-1152, 1996.
DOI : 10.1007/BF00353091

F. Mili and B. Necib, Impact behavior of cross-ply laminated composite plates under low velocities, Composite Structures, vol.51, issue.3, pp.237-281, 2001.
DOI : 10.1016/S0263-8223(00)00134-3

M. Aktas-ß, C. Atas, B. Içten, and R. Karakuzu, An experimental investigation of the impact response of composite laminates, Composite Structures, vol.87, issue.4, pp.307-320, 2009.
DOI : 10.1016/j.compstruct.2008.02.003

P. Reis, J. Ferreira, P. Santos, M. Richardson, and J. Santos, Impact response of Kevlar composites with filled epoxy matrix, Composite Structures, vol.94, issue.12, pp.3520-3528, 2012.
DOI : 10.1016/j.compstruct.2012.05.025

J. Morton and E. Godwin, Impact response of tough carbon fibre composites, Composite Structures, vol.13, issue.1, pp.1-19, 1989.
DOI : 10.1016/0263-8223(89)90069-X

D. Prevorsek, H. Chin, and A. Bhatnagar, Damage tolerance: design for structural integrity and penetration, Composite Structures, vol.23, issue.2, pp.137-185, 1993.
DOI : 10.1016/0263-8223(93)90018-L

S. Bartus and U. Vaidya, Performance of long fiber reinforced thermoplastics subjected to transverse intermediate velocity blunt object impact, Composite Structures, vol.67, issue.3, pp.263-77, 2005.
DOI : 10.1016/j.compstruct.2004.07.023

G. Reyes and U. Sharma, Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact, Composite Structures, vol.92, issue.2, pp.523-554, 2010.
DOI : 10.1016/j.compstruct.2009.08.038

G. Nejhad, M. Parvizi-majidi, and A. , Impact behaviour and damage tolerance of woven carbon fibre-reinforced thermoplastic composites, Composites, vol.21, issue.2, pp.155-68, 1990.
DOI : 10.1016/0010-4361(90)90008-K

H. Wang and T. Vu-khanh, Damage Extension in Carbon Fiber/PEEK Crossply Laminates under Low Velocity Impact, Journal of Composite Materials, vol.29, issue.8, pp.684-707, 1994.
DOI : 10.1177/002199839402800801

S. Gao and J. Kim, Cooling rate influences in carbon fibre/PEEK composites. Part III: impact damage performance, Composites Part A: Applied Science and Manufacturing, vol.32, issue.6, pp.775-85, 2001.
DOI : 10.1016/S1359-835X(00)00189-5

F. Aymerich, P. Priolo, and D. Vacca, Static loading and low-velocity impact characterization of graphite/PEEK laminates, Proceedings of the international conference on advanced mater, 1998.

M. Vedula and M. Koczak, Impact Resistance of Cross-Plied Polyphenylene Sulfide Composites, Journal of Thermoplastic Composite Materials, vol.2, issue.3, pp.154-63, 1989.
DOI : 10.1177/089270578900200301

G. Spamer and N. Brink, Investigation of the CAI properties of C/PPS and C/APC-2 TP materials, Proceedings of the 33rd international SAMPE symposium: materials-pathway to the, 1988.

C. Ma, C. Lee, M. Chang, and N. Tai, Effect of physical aging on the toughness of carbon fiber-reinforced poly(ether ether ketone) and poly(phenylene sulfide) composites. I, Polymer Composites, vol.21, issue.6, pp.441-448, 1992.
DOI : 10.1002/pc.750130607

G. Davies, Design methodology to improve damage tolerance in composites In: Brite Euram 3159-89 contract report, Dept. of Aeronautics, 1993.

I. De-baere, S. Jacques, W. Van-paepegem, and J. Degrieck, Study of the Mode I and Mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic, Polymer Testing, vol.31, issue.2, pp.322-354, 2012.
DOI : 10.1016/j.polymertesting.2011.12.009

P. Davies, M. Benzeggagh, D. Charentenay, and F. , The delamination behavior of carbon fiber reinforced PPS. In: 32nd International SAMPE, symposium, pp.134-180, 1987.

F. Lachaud, B. Lorrain, L. Michel, and R. Barriol, Experimental and numerical study of delamination caused by local buckling of thermoplastic and thermoset composites, Composites Science and Technology, vol.58, issue.5, pp.727-760, 1997.
DOI : 10.1016/S0266-3538(97)00153-X

O. 'brien and K. , Composite interlaminar shear fracture toughness giic: shear measurement or sheer myth? Tech Memorandum, NASA, 1997.

N. Alif, L. Carlsson, and L. Boogh, The effect of weave pattern and crack propagation direction on mode I delamination resistance of woven glass and carbon composites, Composites Part B: Engineering, vol.29, issue.5, pp.603-614, 1998.
DOI : 10.1016/S1359-8368(98)00014-6

J. Kim, L. Leung, S. Lee, and Y. Hirai, Impact performance of a woven fabric CFRP laminate, Polym Compos, vol.4, pp.549-61, 1996.

J. Funk and J. Deaton, The interlaminar fracture toughness of woven graphite/ epoxy composites, NASA tech paper, 1989.

Y. Siow and V. Shim, An Experimental Study of Low Velocity Impact Damage in Woven Fiber Composites, Journal of Composite Materials, vol.32, issue.12, pp.1178-202, 1998.
DOI : 10.1177/002199839803201203

D. Jegley, Compression behavior of graphite?thermoplastic and graphite? epoxy panels with circular holes or impact damage, NASA tech paper, p.3071, 1991.

D. Baker, Mechanical property characterization and impact resistance of selected graphite/PEEK composite materials. NASA tech Memorandum 102769, AVSCOM tech, pp.90-102, 1991.

C. Atas and O. Sayman, An overall view on impact response of woven fabric composite plates, Composite Structures, vol.82, issue.3, pp.336-381, 2008.
DOI : 10.1016/j.compstruct.2007.01.014

L. Karaog-?lan, A. Noor, and Y. Kim, Frictional contact/impact response of textile composite structures, Composite Structures, vol.37, issue.2, pp.269-80, 1997.
DOI : 10.1016/S0263-8223(97)80018-9

J. Chaudhuri, G. Ghoe, and J. Vinson, Impact Characterization of Graphite Fiber Reinforced Thermoplastic Laminates, Journal of Reinforced Plastics and Composites, vol.12, issue.6, pp.67-685, 1993.
DOI : 10.1177/073168449301200605

J. Aucher, B. Vieille, and L. Taleb, Influence de la temp??rature sur le comportement m??canique de stratifi??s tiss??s thermoplastique ou thermodurcissable, Revue des composites et des mat??riaux avanc??s, vol.21, issue.3, pp.317-360, 2011.
DOI : 10.3166/rcma.21.317-343

B. Vieille, J. Aucher, and L. Taleb, Woven ply thermoplastic laminates under severe conditions: Notched laminates and bolted joints, Composites Part B: Engineering, vol.42, issue.3, pp.341-350, 2011.
DOI : 10.1016/j.compositesb.2010.12.025

A. Tropis, M. Thomas, J. Bounie, and P. Lafon, Certification of the composite outer wing of the ATR72, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 1989-1996 (vols 203-210), vol.209, issue.47, pp.327-366, 1994.
DOI : 10.1243/PIME_PROC_1995_209_307_02

R. Akkerman, L. Warnet, and E. Van-de-ven, Impact damage in woven fabric reinforced composites, Proceedings of the 10th international conference on textile comp TEXCOMP'10, 2010.

E. Abdallah, C. Bouvet, S. Rivallant, B. Broll, and J. Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, pp.1238-1283, 2009.
DOI : 10.1016/j.compscitech.2009.02.029

L. Berglund, Thermoplastic Resins, Handbook of composites, 1998.
DOI : 10.1007/978-1-4615-6389-1_7

D. Moore and J. Seferis, Toughness characterization of carbon fiber PEEK laminates, Pure Appl Chem, vol.63, issue.11, pp.1609-1634, 1991.

L. Carlsson, J. Gillespie, and B. Trethewey, Mode II Interlaminar Fracture of Graphite/Epoxy and Graphite/PEEK, Journal of Reinforced Plastics and Composites, vol.5, issue.3, pp.170-87, 1986.
DOI : 10.1177/073168448600500302

G. Kardomateas and R. Carlson, A Micromechanical Model for the Fiber Bridging of Macro-Cracks in Composite Plates, Journal of Applied Mechanics, vol.63, issue.1, pp.225-258, 1996.
DOI : 10.1115/1.2787203