M. Halpern, Industrial requirements and practices in finite element meshing: a survey of trends, Proceedings of the 6th International Meshing Roundtable, 1997.

H. Borouchaki, Surface mesh enhancement with geometric singularities identification, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.48-49, pp.48-49, 2005.
DOI : 10.1016/j.cma.2004.11.017

X. Sheng and B. E. Hirsh, Triangulation of trimmed surfaces in parametric space, Computer-Aided Design, vol.24, issue.8, pp.437-444, 1992.
DOI : 10.1016/0010-4485(92)90011-X

E. Bechet, J. Cuilliere, and F. Trochu, Generation of a finite element MESH from stereolithography (STL) files, Computer-Aided Design, vol.34, issue.1, pp.1-17, 2002.
DOI : 10.1016/S0010-4485(00)00146-9

J. Cuilliere, An adaptive method for the automatic triangulation of 3D parametric surfaces, Computer-Aided Design, vol.30, issue.2, pp.139-149, 1998.
DOI : 10.1016/S0010-4485(97)00085-7

P. J. Frey and H. Bourouchaki, Surface meshing using a geometric error estimate, International Journal for Numerical Methods in Engineering, vol.7, issue.2, pp.227-245, 2003.
DOI : 10.1002/nme.766

P. J. Frey and P. George, Mesh generation : Application to finite elements, 2008.
DOI : 10.1002/9780470611166

Z. Guan, An extended advancing front technique for closed surfaces mesh generation, International Journal for Numerical Methods in Engineering, vol.50, issue.4, pp.642-667, 2008.
DOI : 10.1002/nme.2190

P. Laug and H. Borouchaki, BLSURF-mesh generator for composite parametric surfaces-user's manual

S. H. Lo and T. S. Lau, Mesh generation over curved surfaces with explicit control on discretization error, Engineering Computations, vol.15, issue.3, pp.357-373, 1998.
DOI : 10.1108/02644409810208516

P. Laug and H. Borouchaki, Curve linearization and discretization for meshing composite parametric surfaces, Communications in Numerical Methods in Engineering, vol.58, issue.1-2, pp.869-876, 2004.
DOI : 10.1002/cnm.725

M. W. Beall, J. Walsh, and M. S. Shephard, Accessing CAD geometry for mesh generation, Proceedings of 12th International Meshing Roundtable, 2003.

S. Dey, M. S. Shephard, and M. K. Georges, Elimination of the adverse effects of small model features by the local modification of automatically generated meshes, Engineering with Computers, vol.5, issue.3/4, pp.134-152, 1997.
DOI : 10.1007/BF01221211

L. Fine, L. Remondini, and J. C. Leon, Automated generation of FEA models through idealization operators, International Journal for Numerical Methods in Engineering, vol.22, issue.1-2, pp.83-108, 2000.
DOI : 10.1002/1097-0207(20000910/20)49:1/2<83::AID-NME924>3.0.CO;2-N

M. S. Shephard, M. W. Beall, and R. M. , Revisiting the elimination of the adverse effects of small model features in automatically generated meshes, Proceedigs of the 7th International Meshing Roundtable, pp.119-132, 1998.

S. Gao, Feature suppression based CAD mesh model simplification, Computer-Aided Design, vol.42, issue.12, pp.1178-1188, 2010.
DOI : 10.1016/j.cad.2010.05.010

W. R. Quadros and S. J. Owen, Defeaturing CAD models using a geometry-based size field and facet-based reduction operators, Engineering with Computers, vol.59, issue.2, pp.211-224, 2012.
DOI : 10.1007/s00366-011-0252-8

P. Laug, Some aspects of parametric surface meshing. Finite Elements in Analysis and Design, pp.216-226, 2010.

S. J. Owen and S. Saigal, Surface mesh sizing control, International Journal for Numerical Methods in Engineering, vol.220, issue.1-3, pp.497-511, 2000.
DOI : 10.1002/(SICI)1097-0207(20000110/30)47:1/3<497::AID-NME781>3.0.CO;2-H

S. Pippa and G. Caligiana, GradH-Correction: guaranteed sizing gradation in multi-patch parametric surface meshing, International Journal for Numerical Methods in Engineering, vol.41, issue.4, pp.495-515, 2005.
DOI : 10.1002/nme.1177

S. Venkataraman and M. Sohoni, Blend recognition algorithm and applications, Proceedings of the sixth ACM symposium on Solid modeling and applications , SMA '01, pp.99-108, 2001.
DOI : 10.1145/376957.376970

S. Venkataraman, M. Sohoni, and R. Rajadhyaksha, Removal of blends from boundary representation models, Proceedings of the seventh ACM symposium on Solid modeling and applications , SMA '02, pp.83-94, 2002.
DOI : 10.1145/566282.566297

S. Venkataraman and M. Sohoni, Reconstruction of feature volumes and feature suppression, Proceedings of the seventh ACM symposium on Solid modeling and applications , SMA '02, pp.60-71, 2002.
DOI : 10.1145/566282.566295

K. Y. Lee, A small feature suppression/unsuppression system for preparing B-rep models for analysis, Proceedings of the 2005 ACM symposium on Solid and physical modeling , SPM '05, 2005.
DOI : 10.1145/1060244.1060258

B. W. Clark, Removing Small Features with Real CAD Operations, Proceedings of the 16th International Meshing Roundtable, 2007.
DOI : 10.1007/978-3-540-75103-8_11

A. Thakur, A. G. Banerjee, and S. K. Gupta, A survey of CAD model simplification techniques for physicsbased simulation applications, CAD Computer Aided Design, issue.2, pp.41-65, 2009.

A. Sheffer, Model simplification for meshing using face clustering, Computer-Aided Design, vol.33, issue.13, pp.925-934, 2001.
DOI : 10.1016/S0010-4485(00)00116-0

A. Sheffer, VIRTUAL TOPOLOGY OPERATORS FOR MESHING, International Journal of Computational Geometry & Applications, vol.10, issue.03, pp.309-331, 2000.
DOI : 10.1142/S0218195900000188

K. Inoue, Clustering a large number of faces for 2-Dimensional mesh generation, Proceedings of the 8th International Meshing Roundtable, 1999.

P. Wei, C. Wenliang, and B. Yidong, Mesh Generation Based on Virtual Geometry, Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, 2010.
DOI : 10.1063/1.3457519

T. Tautges, Automatic Detail Reduction for Mesh Generation Applications, Proceedings of the 10th International Meshing Roundtable, 2001.

G. Foucault, Adaptation of CAD model topology for finite element analysis, Computer-Aided Design, vol.40, issue.2, pp.176-196, 2008.
DOI : 10.1016/j.cad.2007.10.009
URL : https://hal.archives-ouvertes.fr/hal-00188600

D. L. Marcum and J. A. Gaither, Unstructured surface grid generation using global mapping and physical space approximation, Proceedings of the 8th International Meshing Roundtable, 1999.

F. Noel, Global parameterization of a topological surface defined as a collection of trimmed bi-parametric patches: Application to automatic mesh construction, International Journal for Numerical Methods in Engineering, vol.9, issue.8, pp.54-965, 2002.
DOI : 10.1002/nme.454

B. Wu and S. Wang, Automatic triangulation over three-dimensional parametric surfaces based on advancing front method. Finite Elements in Analysis and Design, pp.9-10, 2005.

C. K. Lee, Automatic metric advancing front triangulation over curved surfaces, Engineering Computations, vol.17, issue.1, pp.48-74, 2000.
DOI : 10.1108/02644400010308080

C. K. Lee, Automatic metric 3D surface mesh generation using subdivision surface geometrical model. Part 2: Mesh generation algorithm and examples, International Journal for Numerical Methods in Engineering, vol.16, issue.11, pp.56-1615, 2003.
DOI : 10.1002/nme.631

J. R. Tristano, J. O. Steven, and A. C. Scott, Advancing front surface mesh generation in parametric space using riemannian surface definition, International Meshing Roundtable, 1998.

R. Lohner and P. Parikh, Generation of three-dimentional grids by the advancing front method, International Journal for Numerical Methods in Fluids, pp.2135-2159, 1988.

A. Rassineux, Generation and optimization of tetrahedral meshes by advancing front technique, International Journal for Numerical Methods in Engineering, vol.39, issue.4, pp.651-674, 1998.
DOI : 10.1002/(SICI)1097-0207(19980228)41:4<651::AID-NME304>3.0.CO;2-P

P. Moller and P. Hansbo, On advancing front mesh generation in three dimensions, International Journal for Numerical Methods in Engineering, vol.42, issue.21, pp.3551-3569, 1995.
DOI : 10.1002/nme.1620382102

G. Foucault, An Extension of the Advancing Front Method to Composite Geometry, Proceedings of the 16 th International Meshing Roundtable, 2007.
DOI : 10.1007/978-3-540-75103-8_17
URL : https://hal.archives-ouvertes.fr/hal-00401461

V. Francois and J. Cuilliere, 3D automatic remeshing applied to model modification, Computer-Aided Design, vol.32, issue.7, pp.433-444, 2000.
DOI : 10.1016/S0010-4485(00)00028-2

E. W. Dijkstra, A note on two problems in connexion with graphs, Numerische Mathematik, vol.4, issue.1, pp.269-271, 1959.
DOI : 10.1007/BF01386390

J. Qian and Y. Zhang, Automatic unstructured all-hexahedral mesh generation from B-Reps for nonmanifold CAD assemblies, Engineering with Computers, pp.1-15, 2011.

B. W. Clark, B. Hanks, and C. Ernst, Conformal Assembly Meshing with Tolerant Imprinting, Proceedings of the 17th International Meshing Roundtable, 2008.
DOI : 10.1007/978-3-540-87921-3_16