Measuring the thermal properties of green wood by the transient plane source (TPS) technique - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Holzforschung Année : 2012

Measuring the thermal properties of green wood by the transient plane source (TPS) technique

Résumé

The thermal properties of wood in the green state have been determined by the transient plane source (TPS) technique. Data are presented on thermal conductivity ( λ ), heat capacity ( C ), and thermal diffusivity ( κ ) at moisture contents (MCs) above the fiber saturation point, which are based on measurements using the HotDisk ® apparatus. Four wood species (Douglas fir, beech, birch, and spruce) were tested, and the results are compared with literature data and those obtained by the flash method. A linear relationship was found between the thermal properties λ , C , and κ on the one hand and MC on the other. Equations predicting the thermal values as a function of MC and wood anisotropy are presented. Wood C and λ increase with MC, but wet wood diffuses heat more rapidly than dry wood.
Fichier principal
Vignette du fichier
LABOMAP_HOLZFORSCHUNG_DUPLEIX_2012.pdf (1008.44 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00844672 , version 2 (04-05-2015)

Identifiants

Citer

Anna Dupleix, Andrzej Kusiak, Mark Hugues, Frédéric Rossi. Measuring the thermal properties of green wood by the transient plane source (TPS) technique. Holzforschung, 2012, 67 (4), pp.437-445. ⟨10.1515/hf-2012-0125⟩. ⟨hal-00844672⟩
353 Consultations
678 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More