S. Cerolini, M. Orazio, C. D. Perna, and A. Stazi, Moisture buffering capacity of highly absorbing materials, Energy and Buildings, vol.41, pp.164-168, 2009.

C. J. Simonson, M. Salonvaara, and T. Ojanen, Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part 1 -field measurements, Journal of Thermal Envelope and Building Science, vol.28, issue.1, pp.63-101, 2004.

C. J. Simonson, M. Salonvaara, and T. Ojanen, Heat and mass transfer between indoor air and a permeable and hygroscopic building envelope: part 2 -verification and numerical studies, Journal of Thermal Envelope and Building Science, vol.28, issue.2, pp.161-185, 2004.

O. F. Osanyintola and C. J. Simonson, Moisture buffering capacity of hygroscopic building materials: experimental facilities and energy impact, Energy and Buildings, vol.38, pp.1270-1282, 2006.

S. Roels, P. Talukdar, C. James, and C. J. Simonson, Reliability of material data measurements for hygroscopic buffering, International Journal of Heat and Mass Transfer, vol.53, pp.5355-5363, 2010.

C. Rode, R. Peuhkuri, K. K. Hansen, B. Time, K. Svennberg et al., Moisture buffer value of materials in buildings, Journal of ASTM international, vol.4, issue.5, 2007.

, Japanese Industrial Standard A 1470-1, Determination of water vapour adsorption/desorption properties for building materials: part 1 -response to humidity variation, 2008.

. Iso/dis-24353, Hygrothermal performance of building materials and products -determination of moisture adsorption/desorption properties in response to humidity variation, 2006.

O. F. Osanyintola, P. Talukdar, and C. J. Simonson, Effect of initial conditions, boundary conditions and thickness on the moisture buffering capacity of spruce plywood, Energy and Buildings, vol.38, pp.1283-1292, 2006.

M. Boutin, C. Flamin, S. Quinton, and G. Gosse, Etude des caractéristiques environnementales du chanvre par l'analyse de son cycle de vie, 2005.

C. Garnier, S. Prétot, and F. Collet, Life assessment of hemp concrete wall manufactured by spraying, 2nd International conference on building energy and environment, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00767912

S. Elfordy, F. Lucas, F. Tancret, Y. Sculler, and L. Goudet, Mechanical and thermal properties of lime and hemp concrete ("hempcrete") manufactured by projection process, Construction and Building Materials, vol.22, issue.10, pp.2116-2123, 2008.

L. Arnaud and E. Gourlay, Experimental study of parameters influencing mechanical properties, Construction and Building Materials, vol.28, pp.50-56, 2012.

P. B. De-bruijn, K. H. Jeppson, K. Sandin, and C. Nilsson, Mechanical properties of lime-hemp concrete containing shives and fibres, Biosystems Engineering, vol.103, issue.4, pp.474-479, 2009.

L. Arnaud, Mechanical and thermal properties of hemp mortars and wools: experimental and theoretical approaches, 3 Symp Int of bioresource hemp, 2000.

S. Pretot, F. Collet, P. Glouannec, and V. Lang, Variation des propriétés thermiques de bétons de chanvre en fonction de la formulation, Congrès franç ais de thermique-Efficacité énergétique, pp.865-870, 2009.

F. Collet, M. Bart, L. Serres, and J. Miriel, Porous structure and water vapour sorption of hemp-based materials, Construction and Building Material, vol.22, pp.1271-1280, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00705133

A. Evrard and A. De-herde, Hygrothermal performance of lime-hemp wall assemblies, Journal of Building Physics, vol.34, pp.15-25, 2010.

F. Collet and S. Pretot, Experimental investigation of moisture buffering capacity of sprayed hemp concrete, Construction and Building Materials, vol.36, pp.58-65, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00714597

S. Pretot and F. Collet, Experimental Study of Hygrothermal Behavior of a Hemp Concrete Wall (Without and With Coating), 2nd International Conference on Building Energy and Environment, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00767920

A. Shea, M. Lawrence, and P. Walker, Hygrothermal performance of an experimental hemp-lime building, Construction and Building Materials, vol.36, pp.270-275, 2012.

A. Evrard and A. De-herde, Hygrothermal performance of lime-hemp wall assemblies, Journal of Building Physics, vol.34, pp.15-25, 2010.

A. D. Tran-le, C. Maalouf, T. H. Mai, E. Wurtz, and F. Collet, Transient hygrothermal behavior of a hemp concrete building envelope, Energy and Buildings, vol.42, pp.1797-1806, 2010.

, Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity, Pure and Applied Chemistry, vol.57, issue.4, pp.603-619, 1986.

Y. Xie, C. A. Hill, Z. Jalaludin, S. F. Curling, R. D. Anandjiwala et al., The dynamic water sorption behaviour of natural fibres and kinetic analysis using the parallel exponential kinetics model, Journal of Materials Science, vol.46, pp.479-489, 2011.

S. Brunauer, P. H. Emmet, and E. Teller, Adsorption of gases in multimolecular layers, Journal of the American Chemical Society, vol.60, pp.309-319, 1938.

E. P. Barett, L. G. Joyner, and P. P. Halenda, The determination of pore volume and area distributions in porous substances -I. Computations from nitrogen isotherms, Journal of American Chemical Society, vol.73, pp.373-380, 1951.

E. A. Guggenheim, Application of Statistical Mechanics, 1966.

R. B. Anderson, Modifications of the Brunauer, Emmett and Teller, Journal of the American Chemical Society, vol.68, issue.4, pp.686-691, 1946.

R. B. Anderson and W. K. Hall, Modifications of the Brunauer, Emmett and Teller, equation II, Journal of the American Chemical Society, vol.70, issue.5, pp.1727-1734, 1948.

J. H. De and . Boer, The Dynamical Character of Adsorption, 1953.

G. H. Galbraith, R. C. Mclean, and J. Guo, Moisture permeability data presented as a mathematical function applicable to heat and moisture transport models, Building Simulation, 1997.

R. Mclean, G. Galbraith, and C. Sanders, Moisture transmission testing of building materials and the presentation of vapor permeability values, Building Research and Practice, vol.2, pp.82-91, 1990.

A. Tveit, Measurements of moisture sorption and moisture permeability of porous materials, report, vol.45, 1966.

D. A. De and . Vries, Simultaneous transfer of heat and moisture in porous media, Transactions, vol.39, pp.909-916, 1958.

C. Rode, Moisture Buffering of Building Materials, Report BYG·DTU R-126, 2005.

R. Peuhkuri and C. Rode, Using dynamic moisture loading tests for the determination of moisture buffer value, Annex 41 Meeting, pp.16-18, 2005.

, Bio-aggregate-based Building Materials: Applications to Hemp Concretes, vol.9781848214040, 2013.

, Règles Professionnelles d'Exécution d'Ouvrage en Bétons de Chanvre, Association Construire en chanvre, 2007.

A. Evrard, Transient hygrothermal behavior of Lime-Hemp materials, 2008.

H. Derluyn, D. Derome, J. Carmeliet, E. Stora, and R. Barbarulo, Hysteretic moisture behavior of concrete: modelling and analysis, Cement and Concrete Research, vol.42, pp.1379-1388, 2012.

A. Zaknoune, Etude du comportement thermohydrique de matériaux « chanvre-chaux » lors de la phase de séchage -estimation par technique inverse des propriétés hydriques, 2011.

D. Derome, H. Derlyun, W. Zillig, and J. Carmeliet, Model for hysteretic moisture behavior of wood, Proceedings of the Nordic Symposium on Building Physics, vol.2, pp.959-966, 2008.