T. M. Jahns and W. L. Soong, Pulsating torque minimization techniques for permanent magnet AC motor drives-a review, IEEE Transactions on Industrial Electronics, vol.43, issue.2, pp.321-330, 1996.
DOI : 10.1109/41.491356

H. R. Bolton and R. A. Ashen, Influence of motor design and feed-current waveform on torque ripple in brushless DC drives, IEE Proceedings on Electric Power Applications, 1984.
DOI : 10.1049/ip-b.1984.0013

S. Chen, C. Namuduri, and S. Mir, Controller-induced parasitic torque ripples in a PM synchronous motor, IEEE Transactions on Industry Applications, vol.38, issue.5, pp.1273-1281, 2002.
DOI : 10.1109/TIA.2002.803000

W. Qian, S. Panda, and J. Xu, Torque Ripple Minimization in PM Synchronous Motors Using Iterative Learning Control, IEEE Transactions on Power Electronics, vol.19, issue.2, pp.272-279, 2004.
DOI : 10.1109/TPEL.2003.820537

M. Islam, S. Mir, and T. Sebastian, Issues in Reducing the Cogging Torque of Mass-Produced Permanent-Magnet Brushless DC Motor, IEEE Transactions on Industry Applications, vol.40, issue.3, pp.813-820, 2004.
DOI : 10.1109/TIA.2004.827469

G. Sturzer, D. Flieller, and J. Louis, Extension of the park's transformation applied to non-sinusoidal saturated synchronous motors, European Power Electronics and Drives, pp.16-20, 2002.

N. J. Nagel and R. D. Lorenz, Rotating vector methods for smooth torque control of a switched reluctance motor drive, IEEE Transactions on Industry Applications, vol.36, issue.2, pp.540-548, 2000.
DOI : 10.1109/28.833772

Y. Zhang, J. Zhu, W. Xu, and Y. Guo, A Simple Method to Reduce Torque Ripple in Direct Torque-Controlled Permanent-Magnet Synchronous Motor by Using Vectors With Variable Amplitude and Angle, IEEE Transactions on Industrial Electronics, vol.58, issue.7, pp.2848-2859, 2011.
DOI : 10.1109/TIE.2010.2076413

H. Zhu, X. Xi, and Y. Li, Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors, IEEE Transactions on Industrial Electronics, vol.59, issue.2, pp.871-877, 2012.
DOI : 10.1109/TIE.2011.2157278

D. Wang, X. Wang, Y. Yang, and R. Zhang, Optimization of Magnetic Pole Shifting to Reduce Cogging Torque in Solid-Rotor Permanent-Magnet Synchronous Motors, IEEE Transactions on Magnetics, vol.46, issue.5, pp.1228-1234, 2010.
DOI : 10.1109/TMAG.2010.2044044

R. Islam, I. Husain, A. Fardoun, and K. Mclaughlin, Permanent-Magnet Synchronous Motor Magnet Designs With Skewing for Torque Ripple and Cogging Torque Reduction, IEEE Transactions on Industry Applications, vol.45, issue.1, pp.152-160, 2009.
DOI : 10.1109/TIA.2008.2009653

U. Seo, Y. Chun, J. Choi, P. Han, D. Koo et al., A Technique of Torque Ripple Reduction in Interior Permanent Magnet Synchronous Motor, IEEE Transactions on Magnetics, vol.47, issue.10, pp.3240-3243, 2011.
DOI : 10.1109/TMAG.2011.2150742

H. Le-huy, R. Perret, and R. Feuillet, Minimization of Torque Ripple in Brushless DC Motor Drives, IEEE Transactions on Industry Applications, vol.22, issue.4, pp.748-755, 1986.
DOI : 10.1109/TIA.1986.4504787

J. Y. Hung and Z. Ding, Minimization of torque ripple in permanent magnet motors: a closed form solution, Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Automation, pp.459-463, 1992.
DOI : 10.1109/IECON.1992.254563

S. Clenet, Y. Lefèvre, N. Sadowski, S. Astier, and M. Lajoie-mazenc, Compensation of permanent magnet motors torque ripple by means of current supply waveshapes control determined by finite element method, IEEE International Electric Machines and Drives Conference, pp.2019-2023, 1993.
DOI : 10.1109/20.250806

A. P. Wu and P. L. Chapman, Simple Expressions for Optimal Current Waveforms for Permanent-Magnet Synchronous Machine Drives, IEEE Transactions on Energy Conversion, vol.20, issue.1, pp.151-157, 2005.
DOI : 10.1109/TEC.2004.837299

P. L. Chapman, S. D. Sudhoff, and C. A. Whitcomb, Optimal current control strategies for surface-mounted permanent-magnet synchronous machine drives, IEEE Transactions on Energy Conversion, vol.14, issue.4, 1999.
DOI : 10.1109/60.815026

K. Y. Cho, J. D. Bae, S. K. Chung, and M. J. Youn, Torque harmonics minimisation in permanent magnet synchronous motor with back EMF estimation, IEE Proceedings on Electric Power Applications, pp.323-330, 1994.
DOI : 10.1049/ip-epa:19941474

D. Grenier, L. A. Dessaint, O. Akhrif, and J. Louis, A Park-like transformation for the study and the control of a nonsinusoidal brushless DC motor, Proceedings of IECON '95, 21st Annual Conference on IEEE Industrial Electronics, pp.836-843, 1995.
DOI : 10.1109/IECON.1995.483837

D. Grenier, L. A. Dessaint, O. Akhrif, Y. Bonnassieux, and B. L. Pioufle, Experimental nonlinear torque control of a permanent-magnet synchronous motor using saliency, IEEE Transactions on Industrial Electronics, vol.44, issue.5, pp.680-687, 1997.
DOI : 10.1109/41.633471
URL : https://hal.archives-ouvertes.fr/hal-00778211

N. Matsui, Autonomous torque ripple compensation of DD motor by torque observer, Proceedings 1993 Asia-Pacific Workshop on Advances in Motion Control, pp.19-24, 1993.
DOI : 10.1109/APWAM.1993.316180

P. Mattavelli, L. Tubiana, and M. Zigliotto, Torque-Ripple Reduction in PM Synchronous Motor Drives Using Repetitive Current Control, IEEE Transactions on Power Electronics, vol.20, issue.6, pp.1423-1431, 2005.
DOI : 10.1109/TPEL.2005.857559

X. Kestelyn and E. Semail, A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time, IEEE Transactions on Industrial Electronics, vol.58, issue.11, pp.5057-5065, 2011.
DOI : 10.1109/TIE.2011.2119454
URL : https://hal.archives-ouvertes.fr/hal-00785154

W. Zhao, M. Cheng, K. T. Chau, R. Cao, and J. Ji, Remedial Injected-Harmonic-Current Operation of Redundant Flux-Switching Permanent-Magnet Motor Drives, IEEE Transactions on Industrial Electronics, vol.60, issue.1, pp.151-159, 2013.
DOI : 10.1109/TIE.2012.2186107

D. Ould-abdeslam, P. Wira, J. Mercklé, D. Flieller, and Y. A. Chapuis, A Unified Artificial Neural Network Architecture for Active Power Filters, IEEE Transactions on Industrial Electronics, vol.54, issue.1, pp.61-76, 2007.
DOI : 10.1109/TIE.2006.888758

N. K. Nguyen, P. Wira, D. Flieller, D. O. Abdeslam, and J. Mercklé, A comparative experimental study of neural and conventional controllers for an active power filter, IECON 2010, 36th Annual Conference on IEEE Industrial Electronics Society, 1995.
DOI : 10.1109/IECON.2010.5675274

Z. Zhu and D. Howe, Influence of design parameters on cogging torque in permanent magnet machines, IEEE Transactions on Energy Conversion, vol.15, issue.4, pp.407-412, 2000.
DOI : 10.1109/60.900501

E. Favre, L. Cardoletti, and M. Jufer, Permanent-magnet synchronous motors: a comprehensive approach to cogging torque suppression, IEEE Transactions on Industry Applications, vol.29, issue.6, pp.1141-1149, 1993.
DOI : 10.1109/28.259725

L. Dosiek and P. Pillay, Cogging Torque Reduction in Permanent Magnet Machines, IEEE Transactions on Industry Applications, vol.43, issue.6, pp.1565-1571, 2007.
DOI : 10.1109/TIA.2007.908160

D. C. Hanselman, Minimum torque ripple, maximum efficiency excitation of brushless permanent magnet motors, IEEE Transactions on Industrial Electronics, vol.41, issue.3, pp.292-300, 1994.
DOI : 10.1109/41.293899

J. Y. Hung, Design of the most efficient excitation for a class of electric motor, IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol.41, issue.4, pp.341-344, 1994.
DOI : 10.1109/81.285694

S. Dwari and L. Parsa, An Optimal Control Technique for Multiphase PM Machines Under Open-Circuit Faults, IEEE Transactions on Industrial Electronics, vol.55, issue.5, pp.1988-1995, 2008.
DOI : 10.1109/TIE.2008.920643

B. Widrow and E. Walach, Adaptive inverse control, Proceedings of 8th IEEE International Symposium on Intelligent Control, 1996.
DOI : 10.1109/ISIC.1993.397732

D. Flieller-received-the and M. Sc, degree in Electrical Engineering from the Ecole Normale Supérieure (Cachan), France, in 1988 and the Ph.D. degree in Electrical Engineering from the University Since 1995, he is an Associate Professor in the Department of Electrical Engineering, INSA of Strasbourg, France. He is now director of the ERGE Group (Electrical Engineering Research Team) His research's field are modeling and control of synchronous motors, active filter, and induction heating converters, 1995.

P. Wira, respectively. He received the Accreditation to Supervise Research (the French HabilitationàHabilitation`Habilitationà Diriger des Recherches) in Computer Sciences from the University of Haute Alsace in 2009. He was an Associate Professor with the MIPS Laboratory (Laboratoire Modélisation, Intelligence, Processus, Système) at the University of Haute Alsace . Since 2011, he is a Full Professor. He is author or coauthor of more than 20 technical papers covering his research interests from artificial neural networks for the modeling and simulation of complex automation systems, neuro-control approaches, 1997.