A. Broatch, J. M. Luján, S. Ruiz, and P. Olmeda, Measurement of hydrocarbon and carbon monoxide emissions during the starting of automotive DI Diesel engines, International Journal of Automotive Technology, vol.8, issue.3, pp.129-140, 2008.
DOI : 10.1007/s12239-008-0017-6

J. M. Desantes, J. Galindo, C. Guardiola, and V. Dolz, Air mass flow estimation in turbocharged diesel engines from in-cylinder pressure measurement, Experimental Thermal and Fluid Science, vol.34, issue.1, pp.37-47, 2010.
DOI : 10.1016/j.expthermflusci.2009.08.009

J. M. Luján, V. Bermúdez, C. Guardiola, and A. Abbad, A methodology for combustion detection in diesel engines through in-cylinder pressure derivative signal, Mechanical Systems and Signal Processing, vol.24, issue.7, pp.2261-2275, 2010.
DOI : 10.1016/j.ymssp.2009.12.012

M. Beasley, R. Cornwell, P. Fussey, R. King, A. Noble et al., Reducing diesel emissions dispersion by coordinated combustion feedback control, SAE paper, pp.2006-2007, 2006.
DOI : 10.4271/2006-01-0186

F. Payri, A. Broatch, B. Tormos, and V. Marant, New methodology for in-cylinder pressure analysis in direct injection diesel engines???application to combustion noise, Measurement Science and Technology, vol.16, issue.2, pp.16-540, 2005.
DOI : 10.1088/0957-0233/16/2/029

A. J. Torregrosa, P. Olmeda, J. Martín, and C. , Romero A Tool for Predicting the Thermal Performance of a Diesel Engine, Heat Transf. Eng, p.548639, 2011.

J. M. Desantes, A. J. Torregrosa, A. Broatch, and P. Olmeda, Experiments on the influence of intake conditions on local instantaneous heat flux in reciprocating internal combustion engines, Energy, vol.36, issue.1, pp.60-69, 2011.
DOI : 10.1016/j.energy.2010.11.011

M. Lapuerta, O. Armas, and J. J. Hernández, Diagnosis of DI Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas, Applied Thermal Engineering, vol.19, issue.5, pp.513-529, 1999.
DOI : 10.1016/S1359-4311(98)00075-1

J. B. Heywood, Internal Combustion Engine Fundamentals, 1988.

M. T. Garcia, F. J. Jiménez-espadafor-aguilar, J. A. Becerra-villanueva, and E. Trujillo, Analysis of a new analytical law of heat release rate (HRR) for homogenous charge compression ignition (HCCI) combustion mode versus analytical parameters, Applied Thermal Engineering, vol.31, issue.4, pp.31-458, 2011.
DOI : 10.1016/j.applthermaleng.2010.09.025

J. Galindo, H. Climent, B. Plá, and V. D. Jiménez, Correlations for Wiebe function parameters for combustion simulation in two-stroke small engines, Applied Thermal Engineering, vol.31, issue.6-7, pp.31-1190, 2011.
DOI : 10.1016/j.applthermaleng.2010.12.020
URL : https://hal.archives-ouvertes.fr/hal-00723971

K. Lee, M. Yoon, and M. Sunwoo, A study on pegging methods for noisy cylinder pressure signal, Control Engineering Practice, vol.16, issue.8, pp.922-929, 2008.
DOI : 10.1016/j.conengprac.2007.10.007

H. Chang, Y. Zhang, and L. Chen, An applied thermodynamic method for correction of TDC in the indicator diagram and its experimental confirmation, Applied Thermal Engineering, vol.25, issue.5-6, pp.25-759, 2005.
DOI : 10.1016/j.applthermaleng.2004.07.016

E. Pipitone and A. Beccari, Determination of TDC in internal combustion engines by a newly developed thermodynamic approach, Applied Thermal Engineering, vol.30, issue.14-15, pp.1914-1926, 2010.
DOI : 10.1016/j.applthermaleng.2010.04.012
URL : https://hal.archives-ouvertes.fr/hal-00505200

D. T. Hountalas and A. , Anestis, Effect of pressure transducer position on measured cylinder pressure diagram of high speed diesel engines, Energy Conv, Manag, vol.39, pp.589-607, 1998.

F. Payri, J. M. Luján, C. Guardiola, and G. Rizzoni, Injection diagnosis through common-rail pressure measurement, Proc. Inst, pp.347-357, 2006.
DOI : 10.1243/09544070JAUTO34

J. M. Luján, J. Galindo, J. R. Serrano, and B. Pla, A methodology to identify the intake charge cylinder-to-cylinder distribution in turbocharged direct injection Diesel engines, Measurement Science and Technology, vol.19, issue.6, p.65401, 2008.
DOI : 10.1088/0957-0233/19/6/065401

S. X. Shi and H. Z. Sheng, Numerical simulation and digital signal processing in measurements of cylinder pressure of internal combustion engines, Proc. Inst. Mech. Eng. International Conference on Computers in Engine Technology (C345) C20, pp.211-218, 1987.

A. Savitzky and M. J. Golay, Smoothing and Differentiation of Data by Simplified Least Squares Procedures., Analytical Chemistry, vol.36, issue.8, pp.1627-1639, 1964.
DOI : 10.1021/ac60214a047

F. Payri, F. M. Luján, J. Martín, and A. Abbad, Digital signal processing of in-cylinder pressure for combustion diagnosis of internal combustion engines, Mechanical Systems and Signal Processing, vol.24, issue.6, pp.1767-1764, 2010.
DOI : 10.1016/j.ymssp.2009.12.011

G. Giakas and V. Baltzopoulos, Optimal digital filtering requires a different cut-off frequency strategy for the determination of the higher derivatives, Journal of Biomechanics, vol.30, issue.9, pp.851-855, 1997.
DOI : 10.1016/S0021-9290(97)82891-6

E. L. Kosarev and E. Pantos, Optimal smoothing of 'noisy' data by fast Fourier transform, Journal of Physics E: Scientific Instruments, vol.16, issue.6, pp.537-543, 1983.
DOI : 10.1088/0022-3735/16/6/020

F. Payri, S. Molina, J. Martín, and O. Armas, Influence of measurement errors and estimated parameters on combustion diagnosis, Applied Thermal Engineering, vol.26, issue.2-3, pp.226-236, 2006.
DOI : 10.1016/j.applthermaleng.2005.05.006

J. Martín, Aportación al diagnóstico de la combustión en motores Diesel de inyección directa, 2007.