Resin infusion liquid molding vacuum infusion processing numerous other names. An Alphabet Soup Expanding Tecnologies, SAMPE Journal, vol.42, issue.1, 2006. ,
Research in the Application of the VARTM Technique to the Fabrication of Primary Aircraft Composite Structures. Mitsubishi Heavy Industries, Technical Review, vol.42, issue.5, 2005. ,
Process-mechanical properties relationship for an aircraft wing spar: comparison of prepreg, LRI and RFI techniques. FPCM-9, 9th International Conference on Flow Processes in Composite Materials Montréal, 2008. ,
Composite@Airbus ? Damage Tolerance Methodology. FAA Workshop for Composite Damage Tolerance and Maintenance, 2006. ,
Low velocity impact modelling in laminate composite panels with discrete interface elements, International Journal of Solids and Structures, vol.46, issue.14-15, pp.2809-2821, 2009. ,
DOI : 10.1016/j.ijsolstr.2009.03.010
Impact on Composites Structures, 1998. ,
DOI : 10.1017/CBO9780511574504
Impact and compression after impact experimental study of a composite laminate with a cork thermal shield, Composites Science and Technology, vol.67, issue.15-16, pp.3286-3299, 2007. ,
DOI : 10.1016/j.compscitech.2007.03.032
URL : https://hal.archives-ouvertes.fr/hal-00509042
Failure mechanisms on composite specimens subjected to compression after impact, Composite Structures, vol.42, issue.4, pp.365-373, 1998. ,
DOI : 10.1016/S0263-8223(98)00081-6
The permeability of non-crimp stitched fabrics, Composites Part A: Applied Science and Manufacturing, vol.31, issue.12, pp.1345-1353, 2000. ,
DOI : 10.1016/S1359-835X(00)00037-3
Methodology for characterization of internal structure parameters governing performance in NCF composites, Composites Part B: Engineering, vol.38, issue.1, pp.44-57, 2007. ,
DOI : 10.1016/j.compositesb.2006.04.004
Finite-element investigation of the compressive strength of non-crimp-fabric-based composites, Composites Science and Technology, vol.59, issue.8, pp.1287-1297, 1999. ,
DOI : 10.1016/S0266-3538(98)00165-1
Failure of NCF composites subjected to combined compression and shear loading, Composites Science and Technology, vol.66, issue.15, pp.2865-2877, 2006. ,
DOI : 10.1016/j.compscitech.2006.02.021
Structurally stitched NCF preforms: Quasi-static response, Composites Science and Technology, vol.69, issue.15-16, pp.2701-2710, 2009. ,
DOI : 10.1016/j.compscitech.2009.08.015
URL : http://doc.utwente.nl/75510/1/Koissin09structurally.pdf
High velocity impact on NCF reinforced composites, Composites Science and Technology, vol.69, issue.9, pp.1478-1482, 2009. ,
DOI : 10.1016/j.compscitech.2008.05.027
URL : https://hal.archives-ouvertes.fr/hal-00538001
Impact and post-impact properties of a carbon fibre non-crimp fabric and a twill weave composite, Composites Part A: Applied Science and Manufacturing, vol.41, issue.8, pp.1019-1026, 2010. ,
DOI : 10.1016/j.compositesa.2010.04.008
Structurally stitched NCF CFRP laminates Part 1: Experimental characterization of in-plane and out-of-plane properties, Comp. Sci. Tech, vol.71, pp.549-568, 2011. ,
Structurally stitched NCF CFRP laminates. Part 2: Finite element unit cell based prediction of in-plane strength, Comp. Sci. Tech, vol.71, pp.569-585, 2011. ,
A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites, Composites Part A: Applied Science and Manufacturing, vol.28, issue.12, pp.979-991, 1997. ,
DOI : 10.1016/S1359-835X(97)00057-2
Review of z-pinned composite laminates, Composites Part A: Applied Science and Manufacturing, vol.38, issue.12, pp.2383-2397, 2007. ,
DOI : 10.1016/j.compositesa.2007.08.016
Multi-level analysis of low-cost Z-pinned composite joints, Composites Part A: Applied Science and Manufacturing, vol.42, issue.12, pp.2070-2081, 2011. ,
DOI : 10.1016/j.compositesa.2011.09.018
Multi-level analysis of low-cost Z-pinned composite joints, Composites Part A: Applied Science and Manufacturing, vol.42, issue.12, pp.2082-2092, 2011. ,
DOI : 10.1016/j.compositesa.2011.09.017
The effect of processing parameters on the mechanical properties of components manufactured using the Resin Infusion between Double Flexible Tooling Process, p.51, 2006. ,
Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1053-1064, 2009. ,
DOI : 10.1016/j.compositesa.2009.04.013
Advanced numerical simulation of liquid composite molding for process analysis and optimization, Composites Part A: Applied Science and Manufacturing, vol.37, issue.6, pp.890-902, 2006. ,
DOI : 10.1016/j.compositesa.2005.06.003
Comprehensive thermal optimization of liquid composite molding to reduce cycle time and processing stresses, Polymer Composites, vol.13, issue.2, pp.209-230, 2005. ,
DOI : 10.1002/pc.20077
Optimisation de la r??sistance au cisaillement interlaminaire (RCIL) des mat??riaux composites fabriqu??s par LRI en fonction des param??tres de fabrication, Mat??riaux & Techniques, vol.98, issue.2, pp.151-163, 2010. ,
DOI : 10.1051/mattech/2010019
Relationships between process parameters and mechanical properties of composite made by L.R.I, 10th International Conference on Flow Processes in Composite Materials (FPCM10) Monte Verità, 2010. ,
Description of style quadriaxial?carbon?fabric PB, PE. SAERTEX GmbH&Co, 2005. ,
Variation of part thickness and compaction pressure in vacuum infusion process, Composites Science and Technology, vol.69, issue.11-12, pp.1710-1719, 2009. ,
DOI : 10.1016/j.compscitech.2008.05.009
Full field monitoring of the resin flow and laminate properties during the resin infusion process, Composites Part A: Applied Science and Manufacturing, vol.39, issue.9, pp.1412-1426, 2008. ,
DOI : 10.1016/j.compositesa.2008.05.005
A modified rule of mixture for the vacuum-assisted resin transfer moulding process simulation, Composites Science and Technology, vol.68, issue.9, pp.2125-2133, 2008. ,
DOI : 10.1016/j.compscitech.2008.03.019
Effect of material and process variables on the performance of resin-transfer-molded epoxy fabric composites, Journal of Applied Polymer Science, vol.1, issue.10, pp.2149-2155, 2000. ,
DOI : 10.1002/1097-4628(20000906)77:10<2149::AID-APP7>3.0.CO;2-J
An investigation into the effects of fabric architecture on the processing and properties of fibre reinforced composites produced by resin transfer moulding, Composites Part A: Applied Science and Manufacturing, vol.29, issue.1-2, pp.19-27, 1998. ,
DOI : 10.1016/S1359-835X(97)00028-6
Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, pp.1238-1245, 2009. ,
DOI : 10.1016/j.compscitech.2009.02.029