J. P. Merlet, Parallel robots, 2000.
DOI : 10.1007/978-94-010-9587-7
URL : https://hal.archives-ouvertes.fr/lirmm-00127856

I. A. Bonev, The true Origins of Parallel Robots. ParalleMIC: the Parallel Mechanisms Information Center, 2003.

R. G. Roberts, T. Graham, and T. Lippitt, On the inverse kinematics, statics, and fault tolerance of cable-suspended robots, Journal of Robotic Systems, vol.15, issue.10, pp.581-597, 1998.
DOI : 10.1002/(SICI)1097-4563(199810)15:10<581::AID-ROB4>3.0.CO;2-P

N. Riehl, M. Gouttefarde, C. Baradat, and F. Pierrot, On the determination of cable characteristics for large dimension cable-driven parallel mechanisms, 2010 IEEE International Conference on Robotics and Automation, 2010.
DOI : 10.1109/ROBOT.2010.5509887
URL : https://hal.archives-ouvertes.fr/lirmm-00486225

J. Albus, R. Bostelman, and N. Dagalakis, The NIST robocrane, Journal of Robotic Systems, vol.180, issue.5, pp.709-724, 1993.
DOI : 10.1002/rob.4620100509

R. L. Williams, I. , M. Xin, and P. Bosscher, Contour-Crafting-Cartesian-Cable Robot System Concepts: Workspace and Stiffness Comparisons, Volume 2: 32nd Mechanisms and Robotics Conference, Parts A and B
DOI : 10.1115/DETC2008-49478

M. Ishii and M. Sato, A 3D Spatial Interface Device Using Tensed Strings, Presence: Teleoperators and Virtual Environments, vol.3, issue.1, pp.81-86, 1994.
DOI : 10.1145/91394.91451

A. B. Alp and S. K. , Cable suspended robots: design, planning and control, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292), pp.4275-4280, 2002.
DOI : 10.1109/ROBOT.2002.1014428

R. L. Williams, I. , B. Snyder, J. Albus, and R. Bostelman, Seven-DOF Cable-Suspended Robot With Independent Metrology, Volume 2: 28th Biennial Mechanisms and Robotics Conference, Parts A and B, 2004.
DOI : 10.1115/DETC2004-57125

S. Fang, D. Franitza, M. Torlo, F. Bekes, and M. Hiller, Motion Control of a Tendon-BasedParallel Manipulator Using Optimal Tension Distribution, IEEE, pp.561-568, 2004.
DOI : 10.1109/TMECH.2004.835336

S. R. Oh and S. K. , Generation of feasible set points and control of a cable robot, IEEE Trans. on Robotics, vol.22, issue.3, 2006.

L. Mikelsons, T. Bruckmann, M. Hiller, and D. Schramm, A realtime capable force calculation algorithm for redundant tendon-based parallel manipulators, IEEE International Conference on Robotics and Automation, pp.3869-3874, 2008.

T. Dallej, N. Andreff, Y. Mezouar, and P. Martinet, 3D Pose Visual Servoing Relieves Parallel Robot Control from Joint Sensing, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.4291-4296, 2006.
DOI : 10.1109/IROS.2006.281959

N. Andreff, T. Dallej, and P. Martinet, Image-based visual servoing of Gough-Stewart parallel manipulators using legs observation. Joint Issue of IJCV and IJRR on Vision and Robotics, pp.677-687, 2007.

F. Paccot, N. Andreff, and P. Martinet, A Review on the Dynamic Control of Parallel Kinematic Machines: Theory and Experiments, The International Journal of Robotics Research, vol.31, issue.5, pp.395-416, 2009.
DOI : 10.1177/0278364908096236

L. Weiss, A. Sanderson, and C. Neuman, Dynamic sensor-based control of robots with visual feedback, IEEE Journal on Robotics and Automation, vol.3, issue.5, 1987.
DOI : 10.1109/JRA.1987.1087115

B. Espiau, F. Chaumette, and P. Rives, A new approach to visual servoing in robotics, IEEE Transactions on Robotics and Automation, vol.8, issue.3, pp.313-326, 1992.
DOI : 10.1109/70.143350

S. Hutchinson, G. D. Hager, and P. I. Corke, A tutorial on visual servo control, IEEE Transactions on Robotics and Automation, vol.12, issue.5, pp.651-670, 1996.
DOI : 10.1109/70.538972

V. Gough and S. Whitehall, Universal tyre test machine, pp.117-137, 1962.

D. Stewart, A platform with six degrees of freedom, UK Institution of Mechanical Engineers Proceedings, pp.371-386, 1965.

N. Andreff and P. Martinet, Kinematic modelling of some parallel manipulators for control purposes, The first European Conference on Mechanism Science, EuCoMes'06, page 6 pp on CDROM, Austria, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00100415

W. J. Wilson, C. C. Williams-hulls, and G. S. Bell, Relative end-effector control using Cartesian position based visual servoing, IEEE Transactions on Robotics and Automation, vol.12, issue.5, pp.684-696, 1996.
DOI : 10.1109/70.538974

P. Martinet, N. Daucher, J. Gallice, and M. Dhome, Robot control using 3d monocular pose estimation, Proceedings of the Workshop on New Trends in Image Based Robot Servoing, IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS'97, pp.1-12, 1997.

N. Daucher, M. Dhome, J. T. Lapresté, and G. Rives, Speed command of a robotic system by monocular pose estimate, Proceedings of the 1997 IEEE/RSJ International Conference on Intelligent Robot and Systems. Innovative Robotics for Real-World Applications. IROS '97, pp.55-62, 1997.
DOI : 10.1109/IROS.1997.648989

B. Thuilot, P. Martinet, J. Cordesses, and . Gallice, Position based visual servoing: keeping the object in the field of vision, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292), pp.1624-1629, 2002.
DOI : 10.1109/ROBOT.2002.1014775

E. Malis, F. Chaumette, and S. Boudet, 2 1/2 D visual servoing, IEEE International Conference on Robotics and Automation, pp.238-250, 1999.
DOI : 10.1109/70.760345
URL : https://hal.archives-ouvertes.fr/inria-00073302

R. Dahmouche, N. Andreff, P. Mezouar, and . Martinet, 3D pose and velocity visual tracking based on sequential region of interest acquisition, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.5426-5431, 2009.
DOI : 10.1109/IROS.2009.5354642