J. Tang, W. Lee, and G. Springer, Effects of Cure Pressure on Resin Flow, Voids, and Mechanical Properties, Journal of Composite Materials, vol.21, issue.5, pp.421-440, 1987.
DOI : 10.1177/002199838702100502

L. Liu, B. Zhang, D. Wang, and Z. Wu, Effects of cure cycles on void content and mechanical properties of composite laminates, Composite Structures, vol.73, issue.3, pp.303-309, 2006.
DOI : 10.1016/j.compstruct.2005.02.001

S. White and Y. Kim, Staged curing of composite materials, Composites Part A: Applied Science and Manufacturing, vol.27, issue.3, pp.219-227, 1996.
DOI : 10.1016/1359-835X(95)00023-U

M. Yokota, In-Process controlled curing of resin matrix composites, SAMPE Journal, pp.11-17, 1978.

K. Bowles and S. Frimpong, Void Effects on the Interlaminar Shear Strength of Unidirectional Graphite-Fiber-Reinforced Composites, Journal of Composite Materials, vol.3, issue.10, pp.1487-1509, 1992.
DOI : 10.1177/002199839202601006

T. Gutowski, Z. Cai, S. Bauer, D. Boucher, J. Kingery et al., Consolidation Experiments for Laminate Composites, Journal of Composite Materials, vol.160, issue.6, pp.650-669, 1987.
DOI : 10.1177/002199838702100705

A. Loos and G. Springer, Curing of Epoxy Matrix Composites, Journal of Composite Materials, vol.17, issue.2, pp.135-169, 1983.
DOI : 10.1177/002199838301700204

M. Wisnom, T. Reynolds, and N. Gwilliam, Reduction in interlaminar shear strength by discrete and distributed voids, Composites Science and Technology, vol.56, issue.1, pp.93-101, 1996.
DOI : 10.1016/0266-3538(95)00128-X

H. Yoshida, T. Ogasa, and R. Hayashi, Statistical approach to the relationship between ILSS and void content of CFRP, Composites Science and Technology, vol.25, issue.1, pp.3-18, 1986.
DOI : 10.1016/0266-3538(86)90018-7

S. Müller-de-almeida, N. Neto, and Z. , Effect of void content on the strength of composite laminates, Composite Structures, vol.28, issue.2, pp.139-148, 1994.
DOI : 10.1016/0263-8223(94)90044-2

T. Lundström, B. Gebart, and C. Lundemo, Void Formation in RTM, Journal of Reinforced Plastics and Composites, vol.12, issue.12, pp.1340-1349, 1993.
DOI : 10.1177/073168449301201207

J. Leclerc and E. Ruiz, Porosity reduction using optimized flow velocity in Resin Transfer Molding, Composites Part A: Applied Science and Manufacturing, vol.39, issue.12, pp.1859-1868, 2008.
DOI : 10.1016/j.compositesa.2008.09.008

V. Frishfelds, T. Lundstrom, and A. Jakovics, Bubble motion through non-crimp fabrics during composites manufacturing, Composites Part A: Applied Science and Manufacturing, vol.39, issue.2, pp.243-251, 2008.
DOI : 10.1016/j.compositesa.2007.10.020

B. Gourichon, M. Deleglise, C. Binetruy, and P. Krawczak, Dynamic void content prediction during radial injection in liquid composite molding, Composites Part A: Applied Science and Manufacturing, vol.39, issue.1, pp.46-55, 2008.
DOI : 10.1016/j.compositesa.2007.09.008

T. Lundstrom, V. Frishfelds, and A. Jakovics, Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry, Composites Part A: Applied Science and Manufacturing, vol.41, issue.1, pp.83-92, 2010.
DOI : 10.1016/j.compositesa.2009.05.012

E. Ruiz, V. Achim, S. Soukane, F. Trochu, and J. Bréard, Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites, Composites Science and Technology, vol.66, issue.3-4, pp.3-4475, 2006.
DOI : 10.1016/j.compscitech.2005.06.013

N. Olson, T. Lundstrom, and K. Olofsson, Design of experiment study of compression moulding of SMC, Plastics, Rubber and Composites, vol.38, issue.9-10, pp.9-10426, 2009.
DOI : 10.1002/pc.20111

E. Comte, D. Merhi, V. Michaud, and J. Manson, Void formation and transport during SMC manufacturing: Effect of the glass fiber sizing, Polymer Composites, vol.13, issue.3, pp.289-298, 2006.
DOI : 10.1002/pc.20193

P. Odenberger, H. Andersson, and T. Lundstrom, Experimental flow-front visualisation in compression moulding of SMC, Composites Part A: Applied Science and Manufacturing, vol.35, issue.10
DOI : 10.1016/j.compositesa.2004.03.019

R. Pitchumani, S. Ranganathan, R. Don, J. Gillespie, and M. Lamontia, Analysis of transport phenomena governing interfacial bonding and void dynamics during thermoplastic tow-placement, International Journal of Heat and Mass Transfer, vol.39, issue.9, pp.1883-1897, 1996.
DOI : 10.1016/0017-9310(95)00271-5

W. Wang, Z. Zhang, F. Xie, M. Li, D. Dai et al., Correlated Rules between Complex Structure of Composite Components and Manufacturing Defects in Autoclave Molding Technology, Journal of Reinforced Plastics and Composites, vol.28, issue.22, pp.282791-2803, 2009.
DOI : 10.1177/0731684408093876

. Li-m, Y. Li, Z. Zhang, and Y. Gu, Pressure window analysis for thin laminated composites in autoclave process, Polymer Composites, vol.28, issue.2, pp.169-175, 2009.
DOI : 10.1002/pc.20547

J. Kardos and M. Dudukovic, Void growth and resin transport during processing of thermosetting ??? Matrix composites, Adv Polym Sci, vol.80, pp.101-123, 1986.
DOI : 10.1007/3-540-16423-5_13

J. Wood and M. Bader, Void control for polymer-matrix composites (1): Theoretical and experimental methods for determining the growth and collapse of gas bubbles, Composites Manufacturing, vol.5, issue.3, pp.139-147, 1994.
DOI : 10.1016/0956-7143(94)90023-X

J. Kardos, The processing science of reactive polymer composites, Adv Compos Manufact, issue.2, pp.43-80, 1997.

H. Kwak and Y. Kim, Homogeneous nucleation and macroscopic growth of gas bubble in organic solutions, International Journal of Heat and Mass Transfer, vol.41, issue.4-5, pp.757-767, 1998.
DOI : 10.1016/S0017-9310(97)00182-8

P. Halley and M. Mackay, Chemorheology of thermosets?an overview, Polymer Engineering & Science, vol.28, issue.5, pp.593-609, 1996.
DOI : 10.1002/pen.10447

M. Ivankovic, L. Incarnato, J. Kenny, and L. Nicolais, Curing kinetics and chemorheology of epoxy/anhydride system, Journal of Applied Polymer Science, vol.26, issue.11, pp.3012-3019, 2003.
DOI : 10.1002/app.12976

C. Lee and K. Wei, Curing kinetics and viscosity change of a two-part epoxy resin during mold filling in resin-transfer molding process, Journal of Applied Polymer Science, vol.33, issue.10, pp.2139-2148, 2000.
DOI : 10.1002/1097-4628(20000906)77:10<2139::AID-APP6>3.0.CO;2-N

M. Williams, R. Landel, and J. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, Journal of the American Chemical Society, vol.77, issue.14, pp.3701-3707, 1955.
DOI : 10.1021/ja01619a008

J. Castro and C. Macosko, Kinetics and rheology of typical polyurethane reaction injection molding systems, SPE ANTEC Technical, pp.434-438, 1980.

M. Amon and C. Denson, A study of the dynamics of foam growth: Analysis of the growth of closely spaced spherical bubbles, Polymer Engineering and Science, vol.2, issue.13, pp.1026-1034, 1984.
DOI : 10.1002/pen.760241306

Y. Ledru, R. Piquet, F. Schmidt, L. Michel, and G. Bernhart, Modelling of void growth mechanisms during the manufacturing of composite laminates, Proc. of the 9 th FPCM, 2008.

Y. Ledru, Etude de la porosité dans les matériaux composites stratifiés aéronautiques, 2009.

P. Epstein and M. Plesset, On the Stability of Gas Bubbles in Liquid???Gas Solutions, The Journal of Chemical Physics, vol.18, issue.11, pp.1505-1509, 1950.
DOI : 10.1063/1.1747520

T. Lundstrom, Measurement of void collapse during resin transfer moulding, Composites Part A: Applied Science and Manufacturing, vol.28, issue.3, pp.201-214, 1997.
DOI : 10.1016/S1359-835X(96)00109-1