S. Lo, An analysis of cutting under different rake angles using the finite element method, Journal of Materials Processing Technology, vol.105, issue.1-2, pp.143-151, 2000.
DOI : 10.1016/S0924-0136(00)00650-6

Y. Yen, A. Jain, and T. A. Altan, A finite element analysis of orthogonal machining using different tool edge geometries, Journal of Materials Processing Technology, vol.146, issue.1, pp.72-81, 2004.
DOI : 10.1016/S0924-0136(03)00846-X

A. Mamalis, M. Horvath, A. Branis, and D. Manolakos, Finite element simulation of chip formation in orthogonal metal cutting, Journal of Materials Processing Technology, vol.110, issue.1, pp.19-27, 2001.
DOI : 10.1016/S0924-0136(00)00861-X

M. Baker, Finite element investigation of the flow stress dependence of chip formation, Journal of Materials Processing Technology, vol.167, issue.1, pp.1-13, 2004.
DOI : 10.1016/j.jmatprotec.2004.09.076

D. Umbrello, L. Filice, S. Rizzuti, and F. Micari, On the evaluation of the global heat transfer coefficient in cutting, International Journal of Machine Tools and Manufacture, vol.47, issue.11, 2007.
DOI : 10.1016/j.ijmachtools.2006.12.002

D. Umbrello, L. Filice, S. Rizzuti, F. Micari, and L. Settineri, On the effectiveness of Finite Element simulation of orthogonal cutting with particular reference to temperature prediction, Journal of Materials Processing Technology, vol.189, issue.1-3, pp.189-284, 2007.
DOI : 10.1016/j.jmatprotec.2007.01.038

J. Outeiro, J. Pina, and I. Jawahir, Experimental and numerical analysis of residual stresses produced in three dimensional machining processes, Proceedings of the CIRP Conference on modelling of machining operations (Sicily, 2007.

M. Fontaine, A. Devillez, and D. Dudzinski, Parametric geometry for modelling of milling operations, International Journal of Machining and Machinability of Materials, vol.2, issue.2, pp.186-205, 2007.
DOI : 10.1504/IJMMM.2007.013782
URL : https://hal.archives-ouvertes.fr/hal-00261036

T. Ozel and T. Altan, Process simulation using finite element method ??? prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling, International Journal of Machine Tools and Manufacture, vol.40, issue.5, pp.713-738, 2000.
DOI : 10.1016/S0890-6955(99)00080-2

E. Uhlmann, A. Mattes, R. Zettier, V. D. Graf, and M. Schulenburg, Investigations on the adjustement of the modeling section in 2D simulation of milling processes, Proceedings of the CIRP Conference on modelling of machining operations, 2007.

B. Denkena, L. De, L. Garcia, and J. Kohler, FEM simulation of high performance milling, Proceedings of the CIRP Conference on modelling of machining operations, 2007.

I. Korkut, M. Kasap, I. Ciftci, and U. Seker, Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel, Materials & Design, vol.25, issue.4, pp.303-305, 2004.
DOI : 10.1016/j.matdes.2003.10.011

Z. Tekiner and S. Yesilyurt, Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steel, Materials & Design, vol.25, issue.6, pp.507-513, 2004.
DOI : 10.1016/j.matdes.2003.12.011

G. R. Johnson and J. R. Cook, Constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures, Proceedings of 7th Symposium On Ballistics, 1983.

A. Moufki, A. Devillez, D. Dudzinski, and A. Molinari, Thermomechanical modelling of oblique cutting and experimental validation, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.971-989, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.018

M. Movahhedy, Y. Altintas, and M. Gadala, Numerical Analysis of Metal Cutting With Chamfered and Blunt Tools, Journal of Manufacturing Science and Engineering, vol.124, issue.2, 2002.
DOI : 10.1115/1.1445147

Y. Yen, A. Jain, and T. Altan, A finite element analysis of orthogonal machining using different tool edge geometries, Journal of Materials Processing Technology, vol.146, issue.1, pp.72-81, 2004.
DOI : 10.1016/S0924-0136(03)00846-X

M. Fontaine, A. Devillez, A. Moufki, and D. Dudzinski, Predictive force model for ball-end milling and experimental validation with a wavelike form machining test, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.367-380, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.011
URL : https://hal.archives-ouvertes.fr/hal-00178459

J. J. Wang and C. M. Zheng, Identification of shearing and ploughing cutting constants from average forces in ball-end milling, International Journal of Machine Tools and Manufacture, vol.42, issue.6, pp.695-705, 2002.
DOI : 10.1016/S0890-6955(02)00002-0

M. Fontaine, A. Moufki, A. Devillez, and D. Dudzinski, Modelling of cutting forces in ballend milling with tool-surface inclination. Part II: Influence of cutting conditions, run-out, ploughing and inclination angle, Journal of Materials Processing Technology, issue.189, pp.85-96, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00261032

M. Fontaine, A. Devillez, and D. Dudzinski, Parametric geometry for modelling of milling operations, International Journal of Machining and Machinability of Materials, vol.2, issue.2, pp.186-205, 2007.
DOI : 10.1504/IJMMM.2007.013782
URL : https://hal.archives-ouvertes.fr/hal-00261036

A. Maurel, M. Fontaine, S. Thibaud, G. Michel, and J. C. Gelin, Inverse Method for Identification of Material Parameters Directly from Milling Experiments, AIP Conference Proceedings, pp.1435-1438, 2008.
DOI : 10.1063/1.2729601
URL : https://hal.archives-ouvertes.fr/hal-00329611