N. El-abbasi, S. A. Meguid, and A. Czekanski, On the modelling of smooth contact surfaces using cubic splines, International Journal for Numerical Methods in Engineering, vol.43, issue.4, pp.953-967, 2001.
DOI : 10.1002/1097-0207(20010210)50:4<953::AID-NME64>3.0.CO;2-P

F. Armero and E. Petöcz, Formulation and analysis of conserving algorithms for frictionless dynamic contact/impact problems, Computer Methods in Applied Mechanics and Engineering, vol.158, issue.3-4, pp.269-300, 1998.
DOI : 10.1016/S0045-7825(97)00256-9
URL : https://hal.archives-ouvertes.fr/hal-01435615

E. Arnoult, Modélisation numérique et approche expérimentale du contact en dynamique: application au contact aubes, 2000.

J. S. Arora, A. I. Chahande, and J. K. Paeng, Multiplier methods for engineering optimization, International Journal for Numerical Methods in Engineering, vol.27, issue.7, pp.1485-1525, 1991.
DOI : 10.1002/nme.1620320706
URL : https://hal.archives-ouvertes.fr/hal-01352827

L. Baillet, D. Clair, H. Walter, and M. Brunet, A 3D contact algorithm for explicit dynamic Finite Element codes applied to the ironing process " . Metal Forming, NUMISHEET. Krakov, pp.141-147, 2000.

B. A. Barsky, End conditions and boundary conditions for uniform B-spline curve and surface representations, Computers in Industry, vol.3, issue.1-2, pp.1-2, 1982.
DOI : 10.1016/0166-3615(82)90028-8

A. Batailly, Simulation de l'interaction rotor/stator pour des turbomachines aéronautiques en configuration non-accidentelle, 2008.

A. Batailly, M. Legrand, P. Cartraud, and C. Pierre, Assessment of reduced models for the detection of modal interaction through rotor stator contacts, Journal of Sound and Vibration, vol.329, issue.26, pp.5546-5562, 2010.
DOI : 10.1016/j.jsv.2010.07.018

Y. Bazilevs, Isogeometric analysis using T-splines, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.5-8, pp.229-263, 2010.
DOI : 10.1016/j.cma.2009.02.036

C. De-boor, B(asic)-Spline Basics in Fundamental Developments of Computer-Aided Geometric Modeling, pp.27-49, 1993.

N. Carpenter, R. Taylor, and M. Katona, Lagrange constraints for transient finite element surface contact, International Journal for Numerical Methods in Engineering, vol.1, issue.1, pp.103-128, 1991.
DOI : 10.1002/nme.1620320107
URL : https://hal.archives-ouvertes.fr/hal-01389918

D. Chamoret, P. Saillard, A. Rassineux, and J. Bergheau, New smoothing procedures in contact mechanics, Journal of Computational and Applied Mathematics, vol.168, issue.1-2, pp.1-2, 2004.
DOI : 10.1016/j.cam.2003.06.007

F. Chu and W. Lu, Stiffening effect of the rotor during the rotor-to-stator rub in a rotating machine, Journal of Sound and Vibration, vol.308, issue.3-5, pp.758-766, 2007.
DOI : 10.1016/j.jsv.2007.03.059

P. G. Ciarlet, The finite element method for elliptic problems, 1978.

R. R. Craig and M. C. Bampton, Coupling of substructures for dynamic analyses, AIAA Journal, vol.67, pp.1313-1319, 1968.

A. F. Emery, J. Wolak, S. Etemad, and S. R. Choi, An experimental investigation of temperatures due to rubbing at the blade-seal interface in an aircraft compressor, Wear, vol.91, issue.2, pp.117-130, 1983.
DOI : 10.1016/0043-1648(83)90248-X

Z. Q. Feng, P. Joli, M. Cros, and B. Magnain, The bi-potential method applied to the modeling of dynamic problems with friction, Computational Mechanics, vol.33, issue.5, pp.375-383, 2005.
DOI : 10.1007/s00466-005-0663-8

T. J. Hughes, J. A. Cottrell, and Y. Bazilevs, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.39-41, pp.4135-4195, 2005.
DOI : 10.1016/j.cma.2004.10.008
URL : https://hal.archives-ouvertes.fr/hal-01513346

T. J. Hughes, R. L. Taylor, J. L. Sackman, A. Curnier, and W. Kanoknukulchai, A finite element method for a class of contact-impact problems, Computer Methods in Applied Mechanics and Engineering, vol.8, issue.3, pp.149-276, 1976.
DOI : 10.1016/0045-7825(76)90018-9

T. J. Hugues, Stability, convergence and growth and decay of energy of the average acceleration method in nonlinear structural dynamics, Computers & Structures, vol.6, issue.4-5, pp.313-324, 1976.
DOI : 10.1016/0045-7949(76)90007-9

M. L. Kaplan and J. H. Heegaard, Energy-conserving impact algorithm for the heel-strike phase of gait, Journal of Biomechanics, vol.33, issue.6, pp.771-775, 2000.
DOI : 10.1016/S0021-9290(00)00006-3

N. Kikuchi, Penalty/finite element approximations of a class of unilateral contact problems " . Penalty Method and Finite Element Method, ASME, 1982.

H. Kim, Crack evaluation of the fourth stage blade in a low-pressure steam turbine, Engineering Failure Analysis, vol.18, issue.3, pp.907-913, 2011.
DOI : 10.1016/j.engfailanal.2010.11.004

S. K. Lahiri, J. Bonet, and J. Peraire, A variationally consistent mesh adaptation method for triangular elements in explicit Lagrangian dynamics, International Journal for Numerical Methods in Engineering, vol.74, issue.1, pp.1073-1113, 2007.
DOI : 10.1002/nme.2784

T. A. Laursen, Computational contact and impact mechanics, 2002.
DOI : 10.1007/978-3-662-04864-1

M. Legrand, C. Pierre, P. Cartraud, and J. P. Lombard, Two-dimensional modeling of an aircraft engine structural bladed disk-casing modal interaction, Journal of Sound and Vibration, vol.319, issue.1-2, pp.366-391, 2009.
DOI : 10.1016/j.jsv.2008.06.019
URL : https://hal.archives-ouvertes.fr/hal-00328186

W. N. Liu, G. Meschke, and H. A. Mang, Algorithmic stabilization of FE analyses of 2D frictional contact problems with large slip, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.16-18, pp.16-18, 2003.
DOI : 10.1016/S0045-7825(03)00252-4

B. Magnain, Développement d'algorithmes et d'un code de calcul pour l'étude des problèmes de l'impact et du choc, Thèse de doctorat, 2006.
URL : https://tel.archives-ouvertes.fr/tel-00369905

D. R. Martinez, T. G. Carne, D. L. Gregory, and A. K. Miller, Combined experimental/analytical modeling using component mode synthesis, 25th Structures, Structural Dynamics and Materials Conference, pp.140-152, 1984.
DOI : 10.2514/6.1984-941

J. J. Muñoz, Modelling unilateral frictionless contact using the null-space method and cubic B-Spline interpolation, Computer Methods in Applied Mechanics and Engineering, vol.197, pp.9-12, 2008.

L. Noels, L. Stainier, and J. P. Ponthot, Simulation of crashworthiness problems with improved contact algorithms for implicit time integration, International Journal of Impact Engineering, vol.32, issue.5, pp.799-825, 2006.
DOI : 10.1016/j.ijimpeng.2005.04.010
URL : https://hal.archives-ouvertes.fr/hal-01007298

M. Ortiz, A note on energy conservation and stability of nonlinear time-stepping algorithms, Computers & Structures, vol.24, issue.1, pp.167-168, 1986.
DOI : 10.1016/0045-7949(86)90346-9

V. Padmanabhan and T. A. Laursen, A framework for development of surface smoothing procedures in large deformation frictional contact analysis, Finite Elements in Analysis and Design, vol.37, issue.3, pp.173-198, 2001.
DOI : 10.1016/S0168-874X(00)00029-9

C. Padova, J. Barton, M. G. Dunn, and S. Manwaring, Experimental Results From Controlled Blade Tip/Shroud Rubs at Engine Speed, Journal of Turbomachinery, vol.129, issue.4, pp.713-723, 2007.
DOI : 10.1115/1.2720869
URL : https://hal.archives-ouvertes.fr/hal-01333702

M. Park, Y. H. Hwang, Y. S. Choi, and T. G. Kim, Analysis of a J69-T-25 engine turbine blade fracture, Engineering Failure Analysis, vol.9, issue.5, pp.593-601, 2002.
DOI : 10.1016/S1350-6307(02)00003-1
URL : https://hal.archives-ouvertes.fr/hal-01333729

E. Poursaeidi and M. Salavatian, Fatigue crack growth simulation in a generator fan blade, Engineering Failure Analysis, vol.16, issue.3, pp.888-898, 2009.
DOI : 10.1016/j.engfailanal.2008.08.016

J. C. Simo and T. A. Laursen, An augmented lagrangian treatment of contact problems involving friction, Computers & Structures, vol.42, issue.1, pp.97-116, 1992.
DOI : 10.1016/0045-7949(92)90540-G

J. C. Simo, N. Tarnow, and K. K. Wong, Exact energy-momentum conserving algorithms and symplectic schemes for nonlinear dynamics, Computer Methods in Applied Mechanics and Engineering, vol.100, issue.1, pp.63-116, 1992.
DOI : 10.1016/0045-7825(92)90115-Z

A. Sternchüss and E. Balmès, On the reduction of quasi-cyclic disks with variable rotation speeds, Proceedings of the International Conference on Advanced Acoustics and Vibration Engineering (ISMA), pp.3925-3939, 2006.

I. Temizer, P. Wriggers, and T. J. Hughes, Contact treatment in isogeometric analysis with NURBS, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.9-12, pp.1100-1112, 2011.
DOI : 10.1016/j.cma.2010.11.020

D. Vola, E. Pratt, M. Raous, and M. Jean, Consistent time discretization for a dynamical frictional contact problem and complementarity techniques, Revue Européenne des éléments Finis, vol.7, issue.1-3, pp.149-162, 1998.
DOI : 10.1080/12506559.1998.11690471

L. Witek, M. Wierzbi?ska, and A. Pozna?ska, Fracture analysis of compressor blade of a helicopter engine, Engineering Failure Analysis, vol.16, issue.5, pp.1616-1622, 2009.
DOI : 10.1016/j.engfailanal.2008.10.022

P. Wriggers, L. Krstulovic-opara, and J. Korelc, Smooth C1-interpolations for two-dimensional frictional contact problems, International Journal for Numerical Methods in Engineering, vol.7, issue.12, pp.1469-1495, 2001.
DOI : 10.1002/nme.227

J. P. Wright, Analysis of an energy-conserving time integration algorithm, Computers & Structures, vol.31, issue.4, pp.531-533, 1989.
DOI : 10.1016/0045-7949(89)90329-5