K. G. Shin and N. D. Mckay, Minimum-time control of robotic manipulators with geometric path constraints, IEEE Transactions on Automatic Control, vol.30, issue.6, p.531, 1985.
DOI : 10.1109/TAC.1985.1104009

J. E. Bobrow, S. Dubowsky, and J. S. Gibson, Time-Optimal Control of Robotic Manipulators Along Specified Paths, The International Journal of Robotics Research, vol.1, issue.3, p.3, 1985.
DOI : 10.1177/027836498500400301

K. Erkorkmaz and Y. Altintas, High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation, International Journal of Machine Tools and Manufacture, vol.41, issue.9, p.1323, 2001.
DOI : 10.1016/S0890-6955(01)00002-5

B. Sencer, Y. Altintas, and E. Croft, Feed optimization for five-axis CNC machine tools with drive constraints, International Journal of Machine Tools and Manufacture, vol.48, issue.7-8, p.733, 2008.
DOI : 10.1016/j.ijmachtools.2008.01.002

J. Lai, K. Lin, S. Tseng, and W. , On the development of a parametric interpolator with confined chord error, feedrate, acceleration and jerk, The International Journal of Advanced Manufacturing Technology, vol.36, issue.1, p.104, 2008.
DOI : 10.1007/s00170-007-0954-7

M. Heng and K. Erkorkmaz, Design of a NURBS interpolator with minimal feed fluctuation and continuous feed modulation capability, International Journal of Machine Tools and Manufacture, vol.50, issue.3, p.281, 2010.
DOI : 10.1016/j.ijmachtools.2009.11.005

A. Olabi, R. Béarée, O. Gibaru, and M. Damak, Feedrate planning for machining with industrial six-axis robots, Control Engineering Practice, vol.18, issue.5, p.471, 2010.
DOI : 10.1016/j.conengprac.2010.01.004
URL : https://hal.archives-ouvertes.fr/hal-00992192

V. Pateloup, E. Duc, and P. Ray, Corner optimization for pocket machining, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, p.1343, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.011

X. Pessoles, Y. Landon, and W. Rubio, Kinematic modelling of a 3-axis NC machine tool in linear and circular interpolation, The International Journal of Advanced Manufacturing Technology, vol.44, issue.12???13, p.639, 2010.
DOI : 10.1007/s00170-009-2236-z
URL : https://hal.archives-ouvertes.fr/hal-00466700

C. Jun, K. Cha, and Y. Lee, Optimizing tool orientations for 5-axis machining by configuration-space search method, Computer-Aided Design, vol.35, issue.6, p.549, 2003.
DOI : 10.1016/S0010-4485(02)00077-5

M. Ho, Y. Hwang, and C. Hu, Five-axis tool orientation smoothing using quaternion interpolation algorithm, International Journal of Machine Tools and Manufacture, vol.43, issue.12, p.1259, 2003.
DOI : 10.1016/S0890-6955(03)00107-X

C. Castagnetti, E. Duc, and P. Ray, The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation, Computer-Aided Design, vol.40, issue.9, p.838, 2008.
DOI : 10.1016/j.cad.2008.07.002

P. Pechard, C. Tournier, C. Lartigue, and J. Lugarini, Geometrical deviations versus smoothness in 5-axis high-speed flank milling, International Journal of Machine Tools and Manufacture, vol.49, issue.6, p.454, 2009.
DOI : 10.1016/j.ijmachtools.2009.01.005
URL : https://hal.archives-ouvertes.fr/hal-00572764

T. Kim and S. E. Sarma, Toolpath generation along directions of maximum kinematic performance; a first cut at machine-optimal paths, Computer-Aided Design, vol.34, issue.6, p.453, 2002.
DOI : 10.1016/S0010-4485(01)00116-6

S. Lavernhe, C. Tournier, and C. Lartigue, Kinematical performance prediction in multi-axis machining for process planning optimization, The International Journal of Advanced Manufacturing Technology, vol.53, issue.1, p.534, 2008.
DOI : 10.1007/s00170-007-1001-4
URL : https://hal.archives-ouvertes.fr/hal-00373706

R. Fleisig and A. Spence, A constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining, Computer-Aided Design, vol.33, issue.1, p.1, 2001.
DOI : 10.1016/S0010-4485(00)00049-X

C. Lartigue, C. Tournier, M. Ritou, and D. Dumur, High-Performance NC for HSM by means of Polynomial Trajectories, CIRP Annals - Manufacturing Technology, vol.53, issue.1, p.317, 2004.
DOI : 10.1016/S0007-8506(07)60706-9

J. Langeron, E. Duc, C. Lartigue, and P. Bourdet, A new format for 5-axis tool path computation, using Bspline curves, Computer-Aided Design, vol.36, issue.12, p.1219, 2004.
DOI : 10.1016/j.cad.2003.12.002

G. Pardo-castellote and R. H. Cannon, Proximate time-optimal algorithm for on-line path parameterization and modification, Proceedings of IEEE International Conference on Robotics and Automation, p.1539, 1996.
DOI : 10.1109/ROBOT.1996.506923

R. Jerard, R. Drysdale, K. Hauck, B. Schaudt, and J. Magewick, Methods for detecting errors in numerically controlled machining of sculptured surfaces, IEEE Computer Graphics and Applications, vol.9, issue.1, p.26, 1989.
DOI : 10.1109/38.20331

J. D. Errico, SLM Shape Language Modeling, MATLAB Central File Exchange, 2005.