N. Boules, Design optimization of permanent magnet DC motors, IEEE Transactions on Industry Applications, vol.26, issue.4, pp.786-792, 1990.
DOI : 10.1109/28.56006

G. Slemon and X. Liu, Modeling and Design Optimization Of Permanent Magnet Motors, Electric Machines & Power Systems, vol.24, issue.2, pp.71-92, 1992.
DOI : 10.1137/0312021

F. Messine, B. Nogarede, and J. Lagouanelle, Optimal design of electromechanical actuators: a new method based on global optimization, IEEE Transactions on Magnetics, vol.34, issue.1, pp.299-308, 1998.
DOI : 10.1109/20.650361

N. Bianchi and S. Bolognani, Design optimisation of electric motors by genetic algorithms, IEE Proceedings -Electric Power Applications, pp.475-483, 1998.
DOI : 10.1049/ip-epa:19982166

K. Laskaris and A. G. Kladas, Internal Permanent Magnet Motor Design for Electric Vehicle Drive, IEEE Transactions on Industrial Electronics, vol.57, issue.1, pp.138-145, 2010.
DOI : 10.1109/TIE.2009.2033086

D. Dorrell, M. Hsieh, M. Popescu, L. Evans, D. A. Staton et al., A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent-Magnet Motors, IEEE Transactions on Industrial Electronics, vol.58, issue.9, 2010.
DOI : 10.1109/TIE.2010.2089940

N. Bianchi and S. Bolognani, Unified approach to the analysis and design of an AC motor drive for flux-weakening operations, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242), pp.95-102, 1998.
DOI : 10.1109/IAS.1998.732265

E. Lovelace, T. Jahns, and J. Lang, Impact of saturation and inverter cost on interior PM synchronous machine drive optimization, IEEE Transactions on Industry Applications, vol.36, issue.3, pp.723-729, 2000.
DOI : 10.1109/28.845045

J. Figueroa, J. Cros, and P. Viarouge, Relative Sizing of Inverter and Surface Mount PM Motor for Traction Applications, 2006 IEEE International Symposium on Industrial Electronics, pp.2254-2259, 2006.
DOI : 10.1109/ISIE.2006.295923

T. M. Jahns, Flux-Weakening Regime Operation of an Interior Permanent-Magnet Synchronous Motor Drive, IEEE Transactions on Industry Applications, vol.23, issue.4, pp.681-689, 1987.
DOI : 10.1109/TIA.1987.4504966

S. Morimoto, Y. Takeda, T. Hirasa, and K. Taniguchi, Expansion of operating limits for permanent magnet motor by current vector control considering inverter capacity, IEEE Transactions on Industry Applications, vol.26, issue.5, pp.866-871, 1990.
DOI : 10.1109/28.60058

S. Morimoto, Y. Tong, Y. Takeda, and T. Hirasa, Loss minimization control of permanent magnet synchronous motor drives, IEEE Transactions on Industrial Electronics, vol.41, issue.5, pp.511-517, 1994.
DOI : 10.1109/41.315269

C. Mademlis, J. Xypteras, and N. Margaris, Loss minimization in surface permanent-magnet synchronous motor drives, IEEE Transactions on Industrial Electronics, vol.47, issue.1, pp.115-122, 2000.
DOI : 10.1109/41.824133

C. Cavallaro, .. O. Ditommaso, R. Miceli, G. Raciti, M. Galluzzo et al., Efficiency Enhancement of Permanent-Magnet Synchronous Motor Drives by Online Loss Minimization Approaches, IEEE Transactions on Industrial Electronics, vol.52, issue.4, pp.1153-1160, 2005.
DOI : 10.1109/TIE.2005.851595

L. Chedot, G. Friedrich, J. Biedinger, and P. Macret, Integrated Starter Generator: The Need for an Optimal Design and Control Approach. Application to a Permanent Magnet Machine, IEEE Transactions on Industry Applications, vol.43, issue.2, pp.551-559, 2007.
DOI : 10.1109/TIA.2006.889900

O. De-labarrì-ere, S. Hlioui, H. B. Ahmed, M. Gabsi, and M. Lobue, PM Axial Flux Machine Design for Hybrid Traction, Oil & Gas Science and Technology Revue de l'Institut Français du Pétrole, pp.203-218, 2009.
DOI : 10.2516/ogst/2009058

S. Kreuawan, F. Gillon, and P. Brochet, Optimal design of permanent magnet motor using multidisciplinary design optimization, 2008 18th International Conference on Electrical Machines, pp.1-6, 2008.
DOI : 10.1109/ICELMACH.2008.4800108

J. Lindstrom, J. Hellsing, and J. Luomi, Design of high-efficiency electrical motors for a hybrid electric vehicle, 13th International Electric Vehicle Symposium, EVS-13, 1996.

A. Tessarolo, D. Giulivo, and M. Mezzarobba, A system-level approach to the optimal dimensioning of induction-motor variable-frequency drives, Power Electronics and Applications, 2009. EPE'09. 13th European Conference on, pp.1-10, 2009.

J. Aubry, H. B. Ahmed, and B. Multon, Bi-objective sizing optimization of a PM machine drive on an operating profile, The XIX International Conference on Electrical Machines, ICEM 2010, pp.1-7, 2010.
DOI : 10.1109/ICELMACH.2010.5608308
URL : https://hal.archives-ouvertes.fr/hal-00516829

J. Gieras and M. Wing, Permanent magnet motor technology: design and applications, 2002.
DOI : 10.1201/9781420064414

A. Boglietti, A. Cavagnino, D. Staton, M. Shanel, M. Mueller et al., Evolution and Modern Approaches for Thermal Analysis of Electrical Machines, IEEE Transactions on Industrial Electronics, vol.56, issue.3, pp.871-882, 2009.
DOI : 10.1109/TIE.2008.2011622

H. M. Hasanien, Particle Swarm Design Optimization of Transverse Flux Linear Motor for Weight Reduction and Improvement of Thrust Force, IEEE Transactions on Industrial Electronics, vol.58, issue.9, 2010.
DOI : 10.1109/TIE.2010.2100338

C. Coello and M. Reyes-sierra, Multi-Objective Particle Swarm Optimizers: A Survey of the State-of-the-Art, International Journal of Computational Intelligence Research, vol.2, issue.3, pp.287-308, 2006.
DOI : 10.5019/j.ijcir.2006.68

M. Ruellan, H. B. Ahmed, B. Multon, C. Josset, A. Babarit et al., Design Methodology for a SEAREV Wave Energy Converter, IEEE Transactions on Energy Conversion, vol.25, issue.3, pp.760-767, 2010.
DOI : 10.1109/TEC.2010.2046808
URL : https://hal.archives-ouvertes.fr/hal-01156156

A. Babarit, A. H. Clement, and J. Gilloteaux, Optimization and Time-Domain Simulation of the SEAREV Wave Energy Converter, 24th International Conference on Offshore Mechanics and Arctic Engineering: Volume 2, pp.703-712, 2005.
DOI : 10.1115/OMAE2005-67286

A. Mcdonald, M. Mueller, and H. Polinder, Structural mass in direct-drive permanent magnet electrical generators, IET Renewable Power Generation, vol.2, issue.1, p.3, 2008.
DOI : 10.1049/iet-rpg:20070071