On the inverse kinematics, statics, and fault tolerance of cable-suspended robots, Journal of Robotic Systems, vol.15, issue.10, pp.581-597, 1998. ,
DOI : 10.1002/(SICI)1097-4563(199810)15:10<581::AID-ROB4>3.0.CO;2-P
A Study on the Effects of Cable Mass and Elasticity in Cable-Based Parallel Manipulators, Proc. f the18 th CISM-IFToMM Symp. On Robot Design, pp.149-156, 2010. ,
DOI : 10.1109/TRO.2006.870659
Analysis and simulation of a new Cartesian cable-suspended robot, Proc. IMechE 224 Part C: J. Mech. Engineering Science, pp.1717-1726, 2010. ,
DOI : 10.1243/09544062JMES1976
On the Design of Cable-Suspended Planar Parallel Robots, Journal of Mechanical Design, vol.127, issue.5, pp.1021-1028, 2005. ,
DOI : 10.1115/1.1903001
Analysis of the Workspace of Tendon-based Stewart Platforms, 2004. ,
Wire-driven Parallel Robot: Permitting Collisions Between Wires, The International Journal of Robotics Research, vol.3, issue.2, pp.1007-1026, 2008. ,
DOI : 10.1177/0278364908095884
Wire Robots Part I: Kinematics, Analysis & Design, Parallel Manipulators, 2008. ,
DOI : 10.5772/5365
Wrench-based analysis of cable-driven robots, Proc. of IEEE International Conference on Robotics and Automation, pp.4950-4955, 2004. ,
Determination of the Dynamic Workspace of Cable-Driven Planar Parallel Mechanisms, Journal of Mechanical Design, vol.127, issue.2, pp.242-248, 2005. ,
DOI : 10.1115/1.1830045
Force-closure workspace analysis of cable-driven parallel mechanisms, Mechanism and Machine Theory, pp.41-53, 2006. ,
DOI : 10.1016/j.mechmachtheory.2005.04.003
A method of verifying force-closure condition for general cable manipulators with seven cables, Mechanism and Machine Theory, pp.1563-1576, 2007. ,
DOI : 10.1016/j.mechmachtheory.2007.06.008
Design of a Parallel Wire-Driven Manipulator for Wind Tunnels, Proc. of Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators, pp.46-56, 2002. ,
High-speed manipulation by using parallel wire-driven robots, Robotica, vol.18, issue.1, pp.13-21, 2000. ,
DOI : 10.1017/S0263574799002477
Cusp Points in the Parameter Space of RPR-2PRR Parallel Manipulators, European Conference on Mechanism Science, pp.3-14, 2010. ,
DOI : 10.1007/978-90-481-9689-0_4
URL : https://hal.archives-ouvertes.fr/hal-00545445
Uniqueness domains and non singular assembly mode changing trajectories, 2011 IEEE International Conference on Robotics and Automation, 2011. ,
DOI : 10.1109/ICRA.2011.5979929
URL : https://hal.archives-ouvertes.fr/hal-00583302
Ideals, Varieties, and Algorithms, Undergraduate Texts in Mathematics, 1992. ,
Working modes and aspects in fully parallel manipulators, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146), pp.1964-1969, 1998. ,
DOI : 10.1109/ROBOT.1998.680601
On the connections between cable-driven manipulators, parallel manipulators and grasping, Proc. of IEEE Int. Conf. on Rob. & Auto, pp.4521-4526, 2004. ,
Workspace Generation of Planar Wire-Actuated Parallel Manipulators with Antipodal Method, Proc. f the18th CISM-IFToMM Symp. On Robot Design, pp.291-298, 2010. ,
DOI : 10.1023/A:1021158804664
On the Boundaries of the Wrench-Closure Workspace of Planar Parallel Cable-Driven Mechanisms, Volume 2: 34th Annual Mechanisms and Robotics Conference, Parts A and B, pp.2010-28135, 2010. ,
DOI : 10.1115/DETC2010-28135
On the Properties and the Determination of the Wrench-Closure Workspace of Planar Parallel Cable-Driven Mechanisms, Volume 2: 28th Biennial Mechanisms and Robotics Conference, Parts A and B, pp.337-346, 2004. ,
DOI : 10.1115/DETC2004-57127
URL : https://hal.archives-ouvertes.fr/lirmm-00198798
Analysis of the wrench-closure workspace of planar parallel cable-driven mechanisms, IEEE Transactions on Robotics, vol.22, issue.3, pp.434-445, 2006. ,
DOI : 10.1109/TRO.2006.870638
URL : https://hal.archives-ouvertes.fr/lirmm-00199376
Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms, Advances in Robot Kinematics, pp.315-322, 2006. ,
DOI : 10.1007/978-1-4020-4941-5_34
URL : https://hal.archives-ouvertes.fr/lirmm-00198802
Workspaces of Cable-Actuated Parallel Manipulators, Journal of Mechanical Design, vol.128, issue.1, pp.159-167, 2006. ,
DOI : 10.1115/1.2121741