, Research in the Application of the Vartm Technique to the Fabrication of Primary Aircraft Composite Structures, Mitsubishi Heavy Industries, Technical Review, vol.42, issue.5, 2005.
, Identification et modélisation du comportement des structures composites assemblée par cloutage, 2009.
, The permeability of non-crimp stitched fabrics, Composites Part A: Applied Science and Manufacturing, vol.31, issue.12, pp.1345-1353, 2000.
DOI : 10.1016/S1359-835X(00)00037-3
, Advanced numerical simulation of liquid composite molding for process analysis and optimization, Composites Part A: Applied Science and Manufacturing, vol.37, issue.6, pp.890-902, 2006.
DOI : 10.1016/j.compositesa.2005.06.003
, Numerical modelling of liquid infusion into fibrous media undergoing compaction, European Journal of Mechanics - A/Solids, vol.27, issue.4, pp.647-661, 2008.
DOI : 10.1016/j.euromechsol.2007.11.002
URL : https://hal.archives-ouvertes.fr/hal-00582044
, Full field monitoring of the resin flow and laminate properties during the resin infusion process, Composites Part A: Applied Science and Manufacturing, vol.39, issue.9, pp.1412-1426, 2008.
DOI : 10.1016/j.compositesa.2008.05.005
, Permeability and Compaction Models for Non Crimped Fabrics to Perform 3d Filling Simulations of Vacuum Assisted Resin Infusion, The 9th International Conference on Flow Processes In Composite Materials, 2008.
, Variation of part thickness and compaction pressure in vacuum infusion process, Composites Science and Technology, vol.69, issue.11-12, pp.11-12, 2008.
DOI : 10.1016/j.compscitech.2008.05.009
, Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1053-1064, 2009.
DOI : 10.1016/j.compositesa.2009.04.013
, The Effect of Processing Parameters on the Mechanical Properties of Components Manufactured Using the Resin Infusion between Double Flexible Tooling Process, Long Beach, vol.51, 2006.
, Intralaminar toughness characterisation of unbalanced hybrid plain weave laminates, Composites Part A: Applied Science and Manufacturing, vol.38, issue.6, pp.1597-1611, 2007.
DOI : 10.1016/j.compositesa.2006.12.003
, Methodology for characterization of internal structure parameters governing performance in NCF composites, Composites Part B: Engineering, vol.38, issue.1, pp.44-57, 2007.
DOI : 10.1016/j.compositesb.2006.04.004
, Identifying Sources of Variability in the Mechanical Performance of Resin Infused Textile Composites, The 9th International Conference on Textile Composites (TexComp9), 2008.
, Characterization of microstructure in stitched unidirectional composite laminates, Composites Part A: Applied Science and Manufacturing, vol.39, issue.5, pp.815-824, 2008.
DOI : 10.1016/j.compositesa.2008.01.012
, Characterization of 3D morphology and microcracks in composites reinforced by multi-axial multi-ply stitched preforms, Composites Part A: Applied Science and Manufacturing, vol.41, issue.5, pp.653-662, 2010.
DOI : 10.1016/j.compositesa.2010.01.015
URL : https://hal.archives-ouvertes.fr/hal-00850041
, Contribution à l'étude des variabilités des propriétés des stratifiés fabriqués par infusion de résine liquide, Thèse, 2011.
, Experimental and numerical study of compression after impact of sandwich structures with metallic skins, Composites Science and Technology, vol.69, issue.1, pp.50-59, 2009.
DOI : 10.1016/j.compscitech.2007.10.045
, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, 2009.
DOI : 10.1016/j.compscitech.2009.02.029