O. Arioz, Effects of elevated temperatures on properties of concrete, Fire Safety Journal, vol.42, issue.8, pp.516-522, 2007.
DOI : 10.1016/j.firesaf.2007.01.003

P. Barr, Guidelines for the design and assessment of concrete structures subjected to impact, Atomic Energy Authority, 1990.

O. Bayard, Approche multi-échelles du comportement mécanique des bétons à ultra hautes performances renforcés par des fibres courtes, 2003.

P. H. Bischoff and S. H. Perry, Compressive behaviour of concrete at high strain rates, Materials and Structures, vol.114, issue.8, pp.425-450, 1991.
DOI : 10.1007/BF02472016

T. Belytschko, H. Chen, X. Jingxiao, and Z. Goangseup, Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment, International Journal for Numerical Methods in Engineering, vol.1, issue.12, 2003.
DOI : 10.1002/nme.941

T. Bertin-mourot, C. Denoual, G. Dehors, P. Louvigné, and T. Thomas, High Speed Photography of Moire Fringes. Application to Ceramics Under Impact, Le Journal de Physique IV, vol.07, issue.C3, 1997.
DOI : 10.1051/jp4:1997355

URL : https://hal.archives-ouvertes.fr/jpa-00255512

R. De-borst, J. J. Remmers, and A. Needleman, Mesh-independent discrete numerical representations of cohesive-zone models, Engineering Fracture Mechanics, vol.73, issue.2, pp.160-177, 2006.
DOI : 10.1016/j.engfracmech.2005.05.007

X. Brajer, P. Forquin, R. Gy, and F. Hild, The role of surface and volume defects in the fracture of glass under quasi-static and dynamic loadings, Journal of Non-Crystalline Solids, vol.316, issue.1, pp.42-53, 2003.
DOI : 10.1016/S0022-3093(02)01936-1

URL : https://hal.archives-ouvertes.fr/hal-00322503

X. Brajer, F. Hild, S. Roux, and R. Gy, A numerical model to describe damage in glass under impact loading, Journal de Physique IV (Proceedings), vol.110, pp.299-304, 2003.
DOI : 10.1051/jp4:20020710

X. Brajer, F. Hild, and S. Roux, On the dynamic fragmentation of glass: A mesodamage model, Int. J. Fract, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00430487

P. W. Bridgman, Studies in Large Plastic Flow and Fracture, 1952.
DOI : 10.4159/harvard.9780674731349

D. Broek, Elementary Engineering Fracture Mechanics. Martinus Nijhoff, The Hague, the Netherlands, 1982.
DOI : 10.1115/1.3423697

B. Budiansky and R. J. O-'connell, Elastic moduli of a cracked solid, International Journal of Solids and Structures, vol.12, issue.2, pp.81-97, 1976.
DOI : 10.1016/0020-7683(76)90044-5

J. Cagnoux, Déformation et ruine d'un verre Pyrex soumis à un choc intense : étude expérimentale et modélisation du comportement, 1985.

J. Cagnoux and D. Don, Compression uniaxiale, hydrostatique et triaxiale du quartzite de Villejust et du calcaire de Montmoyen, 1994.

G. T. Camacho and M. Ortiz, Computational modelling of impact damage in brittle materials, International Journal of Solids and Structures, vol.33, issue.20-22, pp.2899-2938, 1996.
DOI : 10.1016/0020-7683(95)00255-3

M. Cheyrezy, V. Maret, and L. Frouin, Microstructural analysis of RPC (Reactive Powder Concrete), Cement and Concrete Research, vol.25, issue.7, pp.1491-1500, 1995.
DOI : 10.1016/0008-8846(95)00143-Z

W. A. Curtin, Exact theory of fibre fragmentation in a single-filament composite, Journal of Materials Science, vol.21, issue.19, pp.5239-5253, 1991.
DOI : 10.1007/BF01143218

A. Darrigade and E. Buzaud, High performance concrete: a numerical and experimental study, 9th Int. Symposium on the Interactions of the Effects of Munitions with Structures, 1999.

D. G. Davies, The Statistical Approach to Engineering Design in Ceramics, Proc. Brit, pp.429-452, 1973.

C. Denoual, G. Barbier, and F. Hild, A Probabilistic Approach for Fragmentation of Ceramics under Impact Loading, C. R. Acad. Sci. Paris IIb, vol.325, pp.685-691, 1997.

C. Denoual, C. E. Cottenot, and F. Hild, On the Identification of Damage during Impact of a Ceramic by a Hard Projectile, Proceedings 16th International Conference on BALLISTICS, pp.541-550, 1996.

C. Denoual, C. E. Cottenot, and F. Hild, Analysis of the degradation mechanisms in an impacted ceramic, AIP Conference Proceedings, pp.427-430, 1998.
DOI : 10.1063/1.55543

C. Denoual and F. Hild, A damage model for the dynamic fragmentation of brittle solids, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.3-4, pp.247-258, 2000.
DOI : 10.1016/S0045-7825(99)00221-2

URL : https://hal.archives-ouvertes.fr/hal-00013966

C. Denoual and F. Hild, Dynamic fragmentation of brittle solids: a multi-scale model, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.105-120, 2002.
DOI : 10.1016/S0997-7538(01)01187-1

URL : https://hal.archives-ouvertes.fr/hal-00013965

A. Dragon and D. Halm, A Model of Damage by Mesocrack Growth -Unilateral Behavior and Induced Anisotropy, C. R. Acad. Sci. Paris IIb, vol.322, pp.275-282, 1996.

B. Erzar and P. Forquin, Dynamic tensile experiments for concrete by spalling technique, Exp. Mech, 2009.

H. D. Espinosa, P. D. Zavattieri, and S. K. Dwivedi, A Finite Deformation, 1998.

P. Forquin, Endommagement et fissuration de matériaux fragiles sous impact balistique, rôle de la microstructure, 2003.

P. Forquin, A. Arias, and R. Zaera, An experimental method of measuring the confined compression strength of geomaterials, International Journal of Solids and Structures, vol.44, issue.13, pp.4291-317, 2007.
DOI : 10.1016/j.ijsolstr.2006.11.022

P. Forquin, A. Arias, and R. Zaera, Role of porosity in controlling the mechanical and impact behaviours of cement-based materials, International Journal of Impact Engineering, vol.35, issue.3, pp.133-146, 2008.
DOI : 10.1016/j.ijimpeng.2007.01.002

URL : https://hal.archives-ouvertes.fr/hal-00499097

P. Forquin, C. Denoual, C. E. Cottenot, and F. Hild, Experiments and modelling of the compressive behaviour of two SiC ceramics, Mechanics of Materials, vol.35, issue.10, pp.987-1002, 2003.
DOI : 10.1016/S0167-6636(02)00321-6

P. Forquin and B. Erzar, Dynamic fragmentation process in concrete under impact and spalling tests, Int. J. Fract, 2009.

P. Forquin, G. Gary, and F. Gatuingt, A testing technique for concrete under confinement at high rates of strain, International Journal of Impact Engineering, vol.35, issue.6, pp.425-446, 2008.
DOI : 10.1016/j.ijimpeng.2007.04.007

URL : https://hal.archives-ouvertes.fr/hal-00171883

P. Forquin and F. Hild, Dynamic Fragmentation of an Ultrahigh-Strength Concrete during Edge-On Impact Tests, Journal of Engineering Mechanics, vol.134, issue.4, pp.302-315, 2008.
DOI : 10.1061/(ASCE)0733-9399(2008)134:4(302)

URL : https://hal.archives-ouvertes.fr/hal-00322193

P. Forquin, K. Safa, and G. Gary, Influence of free water on the quasi-static and dynamic strength of concrete in confined compression tests, Cement and Concrete Research, vol.40, issue.2, 2009.
DOI : 10.1016/j.cemconres.2009.09.024

URL : https://hal.archives-ouvertes.fr/hal-00425466

P. Forquin, L. Tran, P. Louvigné, L. Rota, and F. Hild, Effect of aluminum reinforcement on the dynamic fragmentation of SiC ceramics, International Journal of Impact Engineering, vol.28, issue.10, pp.1061-1076, 2003.
DOI : 10.1016/S0734-743X(03)00034-4

URL : https://hal.archives-ouvertes.fr/hal-00002909

M. J. Forrestal, B. S. Altman, J. D. Cargile, and S. J. Hanchak, An empirical equation for penetration depth of ogive-nose projectiles into concrete targets, International Journal of Impact Engineering, vol.15, issue.4, pp.395-405, 1994.
DOI : 10.1016/0734-743X(94)80024-4

M. J. Forrestal, D. J. Frew, S. J. Hanchak, and N. S. Brar, Penetration of grout and concrete targets with ogive-nose steel projectiles, International Journal of Impact Engineering, vol.18, issue.5, pp.465-476, 1996.
DOI : 10.1016/0734-743X(95)00048-F

L. B. Freund, Crack propagation in an elastic solid subjected to general loading???I. Constant rate of extension, Journal of the Mechanics and Physics of Solids, vol.20, issue.3, pp.129-140, 1972.
DOI : 10.1016/0022-5096(72)90006-3

L. B. Freund, Dynamic Fracture Mechanics, 1990.

A. M. Freudenthal, Statistical Approach to Brittle Fracture, pp.591-619, 1968.

D. J. Frew, S. J. Hanchak, M. L. Green, and M. J. Forrestal, Penetration of concrete targets with ogive-nose steel rods, International Journal of Impact Engineering, vol.21, issue.6, pp.489-497, 1998.
DOI : 10.1016/S0734-743X(98)00008-6

B. A. Gailly and H. D. Espinosa, Modelling of failure mode transition in ballistic penetration with a continuum model describing microcracking and flow of pulverized media, International Journal for Numerical Methods in Engineering, vol.142, issue.3, pp.365-398, 2002.
DOI : 10.1002/nme.427

G. Gary, J. R. Klepaczko, and . Greco-géomatériaux, Résumé des résultats expérimentaux sur mini-béton 1992, essais de compression Rapport scientifique, projet 1.3, "dynamique des bétons et des roches, pp.105-118, 1992.

G. Gary, J. R. Klepaczko, P. Hamelin, and P. Rossi, Résultats concernant le comportement dynamique en compression du microbéton, 1991.

Y. N. Ghan, G. F. Peng, and M. Anson, Residual strength and pore structure of highstrength concrete and normal strength concrete after exposure to high temperatures, Cement and Concrete Comp, pp.23-27, 1999.

L. A. Glenn and A. Chudnovsky, Strain???energy effects on dynamic fragmentation, Journal of Applied Physics, vol.59, issue.4, 1986.
DOI : 10.1063/1.336532

J. T. Gomez and A. Shukla, Multiple impact penetration of semi-infinite concrete, International Journal of Impact Engineering, vol.25, issue.10, 2001.
DOI : 10.1016/S0734-743X(01)00029-X

D. A. Gorham, Specimen inertia in high strain-rate compression, Journal of Physics D: Applied Physics, vol.22, issue.12, pp.1888-1893, 1989.
DOI : 10.1088/0022-3727/22/12/014

D. E. Grady, Local inertial effects in dynamic fragmentation, Journal of Applied Physics, vol.53, issue.1, pp.322-325, 1982.
DOI : 10.1063/1.329934

D. E. Grady and M. E. Kipp, Continuum modelling of explosive fracture in oil shale, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.17, issue.3, pp.147-157, 1980.
DOI : 10.1016/0148-9062(80)91361-3

D. E. Grady and M. E. Kipp, Geometric statistics and dynamic fragmentation, Journal of Applied Physics, vol.58, issue.3, 1985.
DOI : 10.1063/1.336139

K. F. Graff, Wave Motion in Elastic Solids, 1975.

S. Grange, P. Forquin, S. Mencacci, and F. Hild, On the dynamic fragmentation of two limestones using edge-on impact tests, International Journal of Impact Engineering, vol.35, issue.9, pp.977-991, 2008.
DOI : 10.1016/j.ijimpeng.2007.07.006

URL : https://hal.archives-ouvertes.fr/hal-00499105

M. Grujicic, B. Pandurangan, N. Coutris, B. A. Cheeseman, C. Fountzoulas et al., A simple ballistic material model for soda-lime glass, International Journal of Impact Engineering, vol.36, issue.3, pp.386-401, 2009.
DOI : 10.1016/j.ijimpeng.2008.08.001

R. Gulino and S. L. Phoenix, Weibull strength statistics for graphite fibres measured from the break progression in a model graphite/glass/epoxy microcomposite, Journal of Materials Science, vol.58, issue.11, 1991.
DOI : 10.1007/BF01124848

N. Guy, D. M. Seyedi, and F. Hild, Hydro-mechanical modelling of underground CO 2 storage and risk evaluation through a probabilistic fracturing model, Proc. 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG), p.7, 2008.

H. A. Heard and C. F. Cline, Mechanical behaviour of polycrystalline BeO, Al2O3 and AlN at high pressure, Journal of Materials Science, vol.11, issue.8, pp.1889-1897, 1980.
DOI : 10.1007/BF00550614

H. D. Hibbitt, B. I. Karlsson, and P. Sorensen, Abaqus User's manual, 2001.

S. Hiermaier and W. Riedel, Numerical Simulation of Failure in Brittle Materials using Smooth Particle Hydrodynamics New Models and Numerical codes for Schock Wave Processes in Condensed Media, St Catherine's College, 1997.

F. Hild, R. Billardon, and D. Marquis, Hétérogénéité des contraintes et rupture des matériaux fragiles, C. R. Acad. Sci. Paris II, vol.315, pp.1293-1298, 1992.

F. Hild, J. Domergue, A. G. Evans, and F. A. Leckie, Tensile and flexural ultimate strength of fiber-reinforced ceramic-matrix composites, International Journal of Solids and Structures, vol.31, issue.7, pp.1035-1045, 1994.
DOI : 10.1016/0020-7683(94)90010-8

F. Hild, P. Forquin, and A. R. Silva, Single and multiple fragmentation of brittle geomaterials, Revue Fran??aise de G??nie Civil, vol.18, issue.3, pp.973-1003, 2003.
DOI : 10.1016/0148-9062(74)91760-4

URL : https://hal.archives-ouvertes.fr/hal-00002911

F. Hild and P. Feillard, Ultimate strength properties of fiber-reinforced composites, Reliability Engineering & System Safety, vol.56, issue.3, pp.225-235, 1997.
DOI : 10.1016/S0951-8320(97)00094-X

E. Hoek and J. A. Franklin, A simple triaxial cell for field and laboratory testing of rock, Trans. Instn Min. Metall, vol.77, pp.22-26, 1968.

C. Y. Hui, S. L. Phoenix, M. Ibnabdeljalil, and R. L. Smith, An exact closed form solution for fragmentation of Weibull fibers in a single filament composite with applications to fiber-reinforced ceramics, Journal of the Mechanics and Physics of Solids, vol.43, issue.10, pp.1551-1585, 1995.
DOI : 10.1016/0022-5096(95)00045-K

A. Ibrahimbegovic and A. Delaplace, Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle material, Computers & Structures, vol.81, issue.12, pp.1255-1266, 2003.
DOI : 10.1016/S0045-7949(03)00040-3

A. Jayatilaka, S. De, and K. Trustrum, Statistical approach to brittle fracture, Journal of Materials Science, vol.229, issue.7, pp.1426-1430, 1977.
DOI : 10.1007/BF00540858

D. Jeulin, Modèles morphologiques de structures aléatoires et changement d'échelle, thèse d'État, 1991.

G. R. Johnson and T. J. Holmquist, An improved computational constitutive model for brittle materials, AIP Conference Proceedings, pp.981-984, 1992.
DOI : 10.1063/1.46199

M. F. Kanninen and C. H. Popelar, Advanced Fracture Mechanics, 1985.

R. P. Kennedy, A review of procedures for the analysis and design of concrete structures to resist missile impact effects, Nuclear Engineering and Design, vol.37, issue.2, pp.183-203, 1976.
DOI : 10.1016/0029-5493(76)90015-7

W. D. Kingery, H. K. Bowen, and D. R. Uhlmann, Introduction to Ceramics, Journal of The Electrochemical Society, vol.124, issue.3, 1976.
DOI : 10.1149/1.2133296

J. R. Klepaczko and A. Brara, An experimental method for dynamic tensile testing of concrete by spalling, International Journal of Impact Engineering, vol.25, issue.4, pp.387-409, 2001.
DOI : 10.1016/S0734-743X(00)00050-6

W. G. Knauss and K. Ravi-chandar, Some basic problems in stress wave dominated fracture, Int. J. Fract, vol.27, pp.3-4, 1985.
DOI : 10.1007/978-94-009-5123-5_1

W. G. Knauss and K. Ravi-chandar, Fundamental considerations in dynamic fracture, Engineering Fracture Mechanics, vol.23, issue.1, pp.9-20, 1986.
DOI : 10.1016/0013-7944(86)90173-6

M. D. Kotsovos and J. B. Newman, Mathematical description of deformational behavior of concrete under generalized stress beyond ultimate strength, J. Am. Concr. Inst. ACI, vol.77, pp.340-346, 1980.

R. D. Krieg, A simple constitutive description for soils and crushable foams, 1978.

N. Kusano, T. Aoyagi, J. Aizawa, H. Ueno, H. Morikawa et al., Impulsive local damage analyses of concrete structure by the distinct element method, Nuclear Engineering and Design, vol.138, issue.1, pp.105-110, 1992.
DOI : 10.1016/0029-5493(92)90282-Z

H. K. Kutter and C. Fairhurst, On the fracture process in blasting, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.8, issue.3, 1971.
DOI : 10.1016/0148-9062(71)90018-0

J. Lankford, Temperature-strain rate dependance of compressive strength and damage mechanisms in aluminium oxide, Journal of Materials Science, vol.62, issue.6, pp.1567-1578, 1981.
DOI : 10.1007/BF02396874

J. Lankford, The compressive strength of strong ceramics: microplasticity versus microfracture, J. Hard Materials, vol.2, issue.12, pp.55-77, 1991.

Q. M. Li, S. R. Reid, H. M. Wen, and A. R. Telford, Local impact effects of hard missiles on concrete targets, International Journal of Impact Engineering, vol.32, issue.1-4, pp.224-284, 2005.
DOI : 10.1016/j.ijimpeng.2005.04.005

L. D. Libersky and A. G. Petscheck, High Strain Lagrangian Hydrodynamics, Journal of Computational Physics, vol.109, issue.1, pp.67-75, 1993.
DOI : 10.1006/jcph.1993.1199

N. Malésys, M. Seyedi, L. Vincent, and F. Hild, On the formation of crack networks in high cycle fatigue, Comptes Rendus M??canique, vol.334, issue.7, pp.419-424, 2006.
DOI : 10.1016/j.crme.2006.05.005

N. Malésys, L. Vincent, and F. Hild, A probabilistic model to predict the formation and propagation of crack networks in thermal fatigue, International Journal of Fatigue, vol.31, issue.3, pp.565-574, 2009.
DOI : 10.1016/j.ijfatigue.2008.03.026

Y. Malier, Les bétons à hautes performances, 1992.

. L. Margolin, Elastic moduli of a cracked body, International Journal of Fracture, vol.15, issue.1, pp.65-79, 1983.
DOI : 10.1007/BF00960099

S. Mastilovic and D. Krajcinovic, High-velocity expansion of a cavity within a brittle material, Journal of the Mechanics and Physics of Solids, vol.47, issue.3, pp.577-600, 1999.
DOI : 10.1016/S0022-5096(98)00040-4

D. Maugis, Cinétique de la fracture et adhérence 4 es journées d'études sur l'adhérence, pp.1-51, 1988.

T. Menouillard, J. Réthoré, A. Combescure, and H. Bung, Efficient explicit time stepping for the eXtended Finite Element Method (X-FEM), International Journal for Numerical Methods in Engineering, vol.23, issue.9, pp.911-939, 2006.
DOI : 10.1002/nme.1718

URL : https://hal.archives-ouvertes.fr/hal-00938641

J. J. Monaghan, Smoothed Particle Hydrodynamics, Annual Review of Astronomy and Astrophysics, vol.30, issue.1, pp.543-574, 1992.
DOI : 10.1146/annurev.aa.30.090192.002551

N. F. Mott, Fragmentation of Shell Cases, Proc. Roy. Soc. London A189, pp.300-308, 1947.
DOI : 10.1098/rspa.1947.0042

J. M. Neumeister, A constitutive law for continuous fiber reinforced brittle matrix composites with fiber fragmentation and stress recovery, Journal of the Mechanics and Physics of Solids, vol.41, issue.8, pp.1383-1404, 1993.
DOI : 10.1016/0022-5096(93)90085-T

S. A. Novikov, I. I. Divnov, and A. G. Ivanov, An investigation of the fracture of steel, aluminium and copper under explosive loading, Fiz. Met. Metalloved, vol.21, pp.608-615, 1966.

D. R. Oakley, An empirical study of the effect of stressed area on the strength of float glass surfaces, Journal of Non-Crystalline Solids, vol.196, pp.134-142, 1996.
DOI : 10.1016/0022-3093(95)00565-X

R. Palaniswamy and S. P. Shah, Fracture and stress?strain relationship of concrete under triaxial compression, J. Struct. Div. ASCE, vol.5, pp.901-916, 1974.

K. Ravi-chandar, Dynamic fracture of nominally brittle materials, International Journal of Fracture, vol.90, issue.1/2, pp.83-102, 1998.
DOI : 10.1023/A:1007432017290

K. Ravi-chandar and W. G. Knauss, Dynamic crack-tip stresses under stress wave loading ?A comparison of theory and experiment, International Journal of Fracture, vol.90, issue.3, pp.209-222, 1982.
DOI : 10.1007/BF01140336

K. Ravi-chandar and W. G. Knauss, An experimental investigation into dynamic fracture: I. Crack initiation and arrest, International Journal of Fracture, vol.3, issue.4, pp.247-262, 1984.
DOI : 10.1007/BF00963460

K. Ravi-chandar and W. G. Knauss, An experimental investigation into dynamic fracture: II. Microstructural aspects, International Journal of Fracture, vol.20, issue.1, pp.65-80, 1984.
DOI : 10.1007/BF01152313

K. Ravi-chandar and W. G. Knauss, An experimental investigation into dynamic fracture: III. On steady-state crack propagation and crack branching, International Journal of Fracture, vol.7, issue.No. 1, pp.141-154, 1984.
DOI : 10.1007/BF01157550

K. Ravi-chandar and W. G. Knauss, An experimental investigation into dynamic fracture: IV. On the interaction of stress waves with propagating cracks, International Journal of Fracture, vol.16, issue.3, pp.189-200, 1984.
DOI : 10.1007/BF01140627

K. Ravi-chandar and B. Yang, On the role of microcracks in the dynamic fracture of brittle materials, Journal of the Mechanics and Physics of Solids, vol.45, issue.4, pp.535-563, 1997.
DOI : 10.1016/S0022-5096(96)00096-8

J. Réthoré, A. Gravouil, and A. Combescure, An energy-conserving scheme for dynamic crack growth using the eXtended finite element method, International Journal for Numerical Methods in Engineering, vol.101, issue.5, 2005.
DOI : 10.1002/nme.1283

P. Richard and M. Cheyrezy, Composition of reactive powder concretes, Cement and Concrete Research, vol.25, issue.7, pp.1501-1511, 1995.
DOI : 10.1016/0008-8846(95)00144-2

P. Riou, C. Denoual, and C. E. Cottenot, Visualization of the damage evolution in impacted silicon carbide ceramics, International Journal of Impact Engineering, vol.21, issue.4, pp.225-235, 1998.
DOI : 10.1016/S0734-743X(97)00018-3

Y. N. Rabotnov, On the equation of state of creep, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Conference Proceedings 1964-1970 (vols 178-184), Various titles labelled Volumes A to S, vol.178, issue.31, pp.307-315, 1963.
DOI : 10.1243/PIME_CONF_1963_178_030_02

A. M. Rajendran, Modeling the impact behavior of AD85 ceramic under multiaxial loading, International Journal of Impact Engineering, vol.15, issue.6, pp.749-768, 1994.
DOI : 10.1016/0734-743X(94)90033-H

P. C. Den-reijer, Impact on Ceramic Faced Armour, 1991.

P. Rossi, Fissuration du béton: du matériau à la structure Application de la mécanique linéaire de la rupture, 1988.

P. Rossi, A physical phenomenon which can explain the mechanical behaviour of concrete under high strain rates, Materials and Structures, vol.27, issue.3, pp.422-424, 1991.
DOI : 10.1007/BF02472015

M. Saad, S. A. Abo-el-eneini, G. B. Hanna, and M. F. Kotkatat, Effect of temperature on physical and mechanical properties of concrete containing silica fume, Cement and Concrete Research, vol.26, issue.5, pp.669-675, 1996.
DOI : 10.1016/S0008-8846(96)85002-2

A. Savva, P. Manita, and K. K. Sideris, Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates, Cement & Concrete Comp, pp.239-248, 2005.
DOI : 10.1016/j.cemconcomp.2004.02.013

H. Schuler, C. Mayrhofer, and K. Thoma, Spall experiments for the measurement of the tensile strength and fracture energy of concrete at high strain rates, International Journal of Impact Engineering, vol.32, issue.10, pp.1635-1650, 2006.
DOI : 10.1016/j.ijimpeng.2005.01.010

M. Seyedi, S. Taheri, and F. Hild, Numerical modeling of crack propagation and shielding effects in a striping network, Nuclear Engineering and Design, vol.236, issue.9, pp.954-964, 2006.
DOI : 10.1016/j.nucengdes.2005.10.002

URL : https://hal.archives-ouvertes.fr/hal-00086961

E. Sharon, S. P. Gross, and J. Fineberg, Local Crack Branching as a Mechanism for Instability in Dynamic Fracture, Physical Review Letters, vol.74, issue.25, pp.74-5096, 1995.
DOI : 10.1103/PhysRevLett.74.5096

D. A. Shockey, D. R. Curran, L. Seaman, J. T. Rosenberg, and C. F. Petersen, Fragmentation of rock under dynamic loads, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.11, issue.8, pp.303-317, 1974.
DOI : 10.1016/0148-9062(74)91760-4

A. R. Da-silva, S. P. Proença, R. Billardon, and F. Hild, Probabilistic Approach to Predict Cracking in Lightly Reinforced Microconcrete Panels, Journal of Engineering Mechanics, vol.130, issue.8, pp.931-941, 2004.
DOI : 10.1061/(ASCE)0733-9399(2004)130:8(931)

URL : https://hal.archives-ouvertes.fr/hal-00002928

E. Strassburger and H. Senf, Experimental Investigations of Wave and Fracture Phenomena in Impacted Ceramics and Glasses, EMI Report, p.214, 1995.

E. Strassburger, H. Senf, and H. Rothenhäusler, Fracture propagation during impact in three types of ceramics, Le Journal de Physique IV, vol.04, issue.C8, pp.653-658, 1994.
DOI : 10.1051/jp4:1994899

URL : https://hal.archives-ouvertes.fr/jpa-00253460

D. V. Swenson and L. M. Taylor, A finite element model for the analysis of tailored pulse stimulation of boreholes, International Journal for Numerical and Analytical Methods in Geomechanics, vol.187, issue.4, pp.469-484, 1983.
DOI : 10.1002/nag.1610070408

H. Trumel, F. Hild, G. Roy, Y. Pellegrini, and C. Denoual, On probabilistic aspects in the dynamic degradation of ductile materials, Journal of the Mechanics and Physics of Solids, vol.57, issue.12, 2009.
DOI : 10.1016/j.jmps.2009.07.001

URL : https://hal.archives-ouvertes.fr/hal-00410324

F. Toutlemonde, Résistance au choc de structures en béton, 1994.

W. Weibull, A Statistical Theory of the Strength of Materials, Report Roy. Swed. Inst. Eng. Res, vol.151, 1939.

W. Weibull, A Statistical Distribution Function of Wide Applicability, ASME J, 1951.

J. Weerheijm, Concrete under impact tensile loading and lateral compression, 1992.
DOI : 10.1016/0029-5493(91)90028-g

J. Weerheijm and J. C. Van-doormaal, Tensile failure of concrete at high loading rates: New test data on strength and fracture energy from instrumented spalling tests, International Journal of Impact Engineering, vol.34, issue.3, 2007.
DOI : 10.1016/j.ijimpeng.2006.01.005

H. Wu, Q. Zhang, F. Huang, and Q. Jin, Experimental and numerical investigation on the dynamic tensile strength of concrete, International Journal of Impact Engineering, vol.32, issue.1-4, pp.605-622, 2005.
DOI : 10.1016/j.ijimpeng.2005.05.008

J. Xiao and G. König, Study on concrete at high temperature in China???an overview, Fire Safety Journal, vol.39, issue.1, pp.89-103, 2004.
DOI : 10.1016/S0379-7112(03)00093-6

X. Xu and A. Needleman, Numerical simulations of fast crack growth in brittle solids, Journal of the Mechanics and Physics of Solids, vol.42, issue.9, pp.1397-1434, 1994.
DOI : 10.1016/0022-5096(94)90003-5

P. D. Zavattieri and H. D. Espinosa, Grain level analysis of crack initiation and propagation in brittle materials, Acta Materialia, vol.49, issue.20, pp.4291-4311, 2001.
DOI : 10.1016/S1359-6454(01)00292-0

F. Zhou and J. Molinari, Stochastic fracture of ceramics under dynamic tensile loading, International Journal of Solids and Structures, vol.41, issue.22-23, pp.6573-6596, 2004.
DOI : 10.1016/j.ijsolstr.2004.05.029

R. G. Zimmerman, Major factors affecting the multiaxial compressive strength of plain concrete. The deformations and the rupture of solids subjected to multiaxial stresses, Proc. of RILEM Int Symposium, pp.257-272, 1972.