Cosserat modelling of size effects in the mechanical behaviour of polycrystals and multi-phase materials, International Journal of Solids and Structures, vol.37, issue.46-47, p.7105, 2000. ,
DOI : 10.1016/S0020-7683(99)00330-3
Grain-size effect in viscoplastic polycrystals at moderate strains, Journal of the Mechanics and Physics of Solids, vol.48, issue.10, p.2213, 2000. ,
DOI : 10.1016/S0022-5096(00)00013-2
Intergranular and intragranular behavior of polycrystalline aggregates.Part 2: Results, International Journal of Plasticity, vol.17, issue.4, p.537, 2001. ,
DOI : 10.1016/S0749-6419(00)00062-0
Some elements of microstructural mechanics, Computational Materials Science, vol.27, issue.3, p.351, 2003. ,
DOI : 10.1016/S0927-0256(03)00041-7
Grain size dependence of the plastic deformation kinetics in Cu, Materials Science and Engineering: A, vol.341, issue.1-2, p.216, 2003. ,
DOI : 10.1016/S0921-5093(02)00238-1
Grain-size dependence of the flow stress of Cu from millimeters to nanometers, Metallurgical and Materials Transactions A, vol.49, issue.236, p.2681, 2004. ,
DOI : 10.1007/s11661-004-0214-5
Effect of grain size from millimeters to nanometers on the flow stress and deformation kinetics of Ag, Materials Science and Engineering: A, vol.391, issue.1-2, p.272, 2005. ,
DOI : 10.1016/j.msea.2004.08.073
An alternative physical explanation of the Hall???Petch relation, Acta Materialia, vol.52, issue.3, p.657, 2004. ,
DOI : 10.1016/j.actamat.2003.10.002
The yield and flow stress of dilute Cu???Cd and Cu???Mg alloys, Materials Science and Engineering, vol.55, issue.2, p.263, 1982. ,
DOI : 10.1016/0025-5416(82)90140-9
Grain-size effects on tensile behavior of nickel and AISI 316L stainless steel, Metallurgical and Materials Transactions A, vol.48, issue.321, p.2329, 2003. ,
DOI : 10.1007/s11661-003-0296-5
The effect of grain size and strain rate on the, Metallurgical Transactions A, vol.24, issue.11, p.2559, 1993. ,
DOI : 10.1007/BF00723360
The combined effect of grain size and strain rate on the dislocation substructures and mechanical properties in pure aluminum, Metallurgical Transactions A, vol.23, issue.5, p.1153, 1993. ,
DOI : 10.1016/0025-5416(87)90442-3
Deformation microstructure and orientation of f.c.c. crystals, Physica Status Solidi (a), vol.24, issue.1, p.187, 1995. ,
DOI : 10.1002/pssa.2211490113
Microstructure and flow stress of polycrystals and single crystals, Acta Materialia, vol.46, issue.5, p.1827, 1998. ,
DOI : 10.1016/S1359-6454(97)00365-0
Microstructural evolution and hardening parameters, Materials Science and Engineering: A, vol.317, issue.1-2, p.3, 2001. ,
DOI : 10.1016/S0921-5093(01)01191-1
Crystallographic and macroscopic orientation of planar dislocation boundaries???correlation with grain orientation, Acta Materialia, vol.48, issue.9, p.2187, 2000. ,
DOI : 10.1016/S1359-6454(00)00027-6
Prediction of the cyclic stress???strain curve of polycrystalline nickel, Acta Materialia, vol.50, issue.2, p.289, 2002. ,
DOI : 10.1016/S1359-6454(01)00355-X
Scaling of microstructural parameters: Misorientations of deformation induced boundaries, Acta Materialia, vol.45, issue.1, p.105, 1997. ,
DOI : 10.1016/S1359-6454(96)00153-X
High angle boundaries formed by grain subdivision mechanisms, Acta Materialia, vol.45, issue.9, p.3871, 1997. ,
DOI : 10.1016/S1359-6454(97)00027-X
Scaling of Misorientation Angle Distributions, Physical Review Letters, vol.81, issue.21, p.4664, 1998. ,
DOI : 10.1103/PhysRevLett.81.4664
Microstructure and strength of nickel at large strains, Acta Materialia, vol.48, issue.11, p.2985, 2000. ,
DOI : 10.1016/S1359-6454(00)00082-3
Scaling of the spacing of deformation induced dislocation boundaries, Acta Materialia, vol.48, issue.8, p.1897, 2000. ,
DOI : 10.1016/S1359-6454(99)00474-7
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress, Acta Materialia, vol.47, issue.13, p.3617, 1999. ,
DOI : 10.1016/S1359-6454(99)00222-0
Quantitative stereology, 1970. ,
Correspondence between Layered Cell Structures and Slip Lines in Deformed Copper Single Crystals, Japanese Journal of Applied Physics, vol.18, issue.8, p.1429, 1979. ,
DOI : 10.1143/JJAP.18.1429
Stress-substructure relationships in cyclically and monotonically deformed wavy slip mode metals, Metallurgical Transactions A, vol.224, issue.282, p.1033, 1989. ,
DOI : 10.1007/BF02643400
Grain-size strengthening in terms of dislocation density measured by resistivity, Acta Metallurgica et Materialia, vol.39, issue.8, p.2037, 1991. ,
DOI : 10.1016/0956-7151(91)90173-X
Role of Conjugate Slip in Deformation of Cu-10at%Al Single Crystals, Journal of the Physical Society of Japan, vol.52, issue.1, p.157, 1983. ,
DOI : 10.1143/JPSJ.52.157
Dense dislocation walls and microbands aligned with slip planes???theoretical considerations, Acta Materialia, vol.45, issue.12, p.5059, 1997. ,
DOI : 10.1016/S1359-6454(97)00168-7
Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium, Acta Materialia, vol.46, issue.16, p.5819, 1998. ,
DOI : 10.1016/S1359-6454(98)00229-8
manuscriptcentral.com/pm-pml Philosophical Magazine & Philosophical Magazine Letters, Acta Mater, vol.80, issue.52, p.705, 2004. ,
Recrystallization and related annealing phenomena (Oxfrod, 1995. ,
Dislocation boundaries???the distribution function of disorientation angles, Acta Materialia, vol.49, issue.8, p.1479, 2001. ,
DOI : 10.1016/S1359-6454(01)00027-1
A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals, Materials Science and Engineering, vol.85, p.15, 1987. ,
DOI : 10.1016/0025-5416(87)90463-0
Dislocation Multipoles in Slightly Deformed Cu???10 at%Al Single Crystals, Journal of the Physical Society of Japan, vol.51, issue.2, p.577, 1982. ,
DOI : 10.1143/JPSJ.51.577
Slip patterns and preferred dislocation boundary planes, Acta Materialia, vol.51, issue.2, p.417, 2003. ,
DOI : 10.1016/S1359-6454(02)00423-8
Substructure evolution and flow behaviour of AISI 316L stainless steel polycrystals at room temperature, Materials Science and Engineering: A, vol.138, issue.2, p.237, 1991. ,
DOI : 10.1016/0921-5093(91)90693-H
The influence of temperature and grain size on substructure evolution in stainless steel 316L, Journal of Materials Science, vol.9, issue.15, p.3820, 1995. ,
DOI : 10.1007/BF01153940
A micromechanical approach to inelastic behaviour of metals, International Journal of Plasticity, vol.8, issue.1, p.55, 1992. ,
DOI : 10.1016/0749-6419(92)90038-E
A Model for yielding in anisotropic metals, Metallurgical Transactions A, vol.8, issue.1, p.107, 1986. ,
DOI : 10.1007/BF02644446
Slip observations in 70???30 alpha brass, Metallurgical Transactions A, vol.34, issue.6, p.1575, 1988. ,
DOI : 10.1007/BF02674032
Micromechanisms of plasticity under multiaxial cyclic loading, in Multiaxial Fatigue and Design, p.21, 1996. ,
Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension??????torsion-internal and external pressure, International Journal of Plasticity, vol.17, issue.11, p.1491, 2001. ,
DOI : 10.1016/S0749-6419(01)00013-4
Striations on Copper Single Crystals Subjected to Torsional Fatigue. II. On the Mechanism of Fatigue Striation Formation and Fatigue Failure at Low Strain Amplitudes, Journal of Applied Physics, vol.38, issue.4, p.1683, 1967. ,
DOI : 10.1063/1.1709742
Dislocation Cell Formation in Metals, Journal of Applied Physics, vol.41, issue.8, p.3197, 1970. ,
DOI : 10.1063/1.1659399
Dislocation patterning in fatigued metals as a result of dynamical instabilities, Journal of Applied Physics, vol.58, issue.2, p.688, 1985. ,
DOI : 10.1063/1.336183
Low energy dislocation structures due to unidirectional deformation at low temperatures, Materials Science and Engineering, vol.81, p.141, 1986. ,
DOI : 10.1016/0025-5416(86)90258-2
A theory of dislocation cell formation based on stochastic dislocation dynamics, Acta Materialia, vol.44, issue.6, p.2345, 1996. ,
DOI : 10.1016/1359-6454(95)00364-9
Investigation of dislocation pattern formation in a two-dimensional self-consistent field approximation, Acta Materialia, vol.47, issue.13, p.3647, 1999. ,
DOI : 10.1016/S1359-6454(99)00215-3
A noise induced transition in the deformation of metals, Physics Letters A, vol.332, issue.3-4, p.207, 2004. ,
DOI : 10.1016/j.physleta.2004.09.046
A generalized comopsite approach to the flow stress and strain hardening of crystals containing heterogeneous dislocation distributions, Materials Science and Engineering: A, vol.249, issue.1-2, p.145, 1998. ,
DOI : 10.1016/S0921-5093(98)00572-3
Climb of extended edge dislocations, Acta Metallurgica, vol.29, issue.2, p.293, 1981. ,
DOI : 10.1016/0001-6160(81)90156-5
FE simulation of macro-, meso- and micro-scales in polycrystalline plasticity, Computational Materials Science, vol.16, issue.1-4, p.383, 1999. ,
DOI : 10.1016/S0927-0256(99)00081-6
Finite element method analysis of micro-macro transition in polycrystalline plasticity, International Journal of Plasticity, vol.8, issue.4, p.477, 1992. ,
DOI : 10.1016/0749-6419(92)90060-P
Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals, Acta Metallurgica, vol.31, issue.9, p.1367, 1983. ,
DOI : 10.1016/0001-6160(83)90007-X
Effect of grain size on substructural evolution and plastic behaviour of copper, Materials Science and Engineering: A, vol.118, p.97, 1989. ,
DOI : 10.1016/0921-5093(89)90061-0
The dependence of polycrystal work hardening on grain size, Acta Metallurgica, vol.21, issue.7, p.1017, 1973. ,
DOI : 10.1016/0001-6160(73)90158-2