Thermal fatigue and failure of electronic power device substrates - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue International Journal of Fatigue Année : 2009

Thermal fatigue and failure of electronic power device substrates

Résumé

Electronic power devices used for transportation applications (automotive and avionics) experience severe temperature variations, which promote their thermal fatigue and failure. For example, for power modules mounted on the engine of an aircraft, temperature variations range from -55°C (in the worst case of storage before takeoff) to +200°C (flight). Direct bonded copper (DBC) substrates are used to isolate chips (silicon dies) from their base plates. For large thermal amplitudes, the failure occurs in DBC substrates, which are copper/ceramic/copper sandwiches. The Weibull approach was used to model the brittle fracture of the ceramic layer from a natural defect. Furthermore, geometric singularities in the upper ceramic/copper interface are at the origin of cracks that grow by fatigue along the interface and finally bifurcate and break the ceramic layer. It is discussed how the framework of linear elastic fracture mechanics (LEFM) can be used to characterize the stress field around singularities and the associated risk of failure. These two criteria and the finite element method, allow analysing how a thermal loading history may modify the risk of failure of DBC substrates. It was shown, in particular, that three overcooling cycles should produce an ‘‘overload retardation effect”. Experimentally, applying three ‘‘overload cycles” (-70°C, +180°C), prior to thermal fatigue cycles (-30°C, +180°C), increased very significantly the fatigue life of DBC substrates. This result shows that the fatigue life and the reliability of power electronic devices could be optimized using a thermo-mechanical approach of the problem and suitable failure criteria.
Fichier principal
Vignette du fichier
Arcticle-pietranico-version-n-1.pdf (905.36 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00417898 , version 1 (17-09-2009)

Identifiants

Citer

Sylvain Pietranico, Sylvie Pommier, Stéphane Lefebvre, Stéphane Pattofatto. Thermal fatigue and failure of electronic power device substrates. International Journal of Fatigue, 2009, 31, pp.1911-1920. ⟨10.1016/j.ijfatigue.2009.03.011⟩. ⟨hal-00417898⟩
250 Consultations
1035 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More