J. Abanto-bueno and J. Lambros, Investigation of crack growth in functionally graded materials using digital image correlation, Engineering Fracture Mechanics, vol.69, issue.14-16, pp.1695-1711, 2002.
DOI : 10.1016/S0013-7944(02)00058-9

J. Abanto-bueno and J. Lambros, Experimental determination of cohesive failure properties of a photodegradable copolymer, Experimental Mechanics, vol.48, issue.(12), pp.144-152, 2005.
DOI : 10.1007/BF02428187

L. Andena, M. Rink, and J. G. Williams, Cohesive zone modelling of fracture in polybutene, Engineering Fracture Mechanics, vol.73, issue.16, pp.476-485, 2006.
DOI : 10.1016/j.engfracmech.2006.04.026

C. Balzani and W. Wagner, An interface element for the simulation of delamination in unidirectional fiber-reinforced composite laminates, Engineering Fracture Mechanics, vol.75, issue.9, pp.2597-2615, 2008.
DOI : 10.1016/j.engfracmech.2007.03.013

G. Besnard, F. Hild, and S. Roux, ???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.46-789, 2006.
DOI : 10.1007/s11340-006-9824-8

T. Black and T. Belytschko, Elastic crack growth in finite elements with minimal remeshing, Int. J. Num. Meth. Eng, vol.45, pp.601-620, 1999.

G. Bolzon, R. Fedele, and G. Maier, Parameter identification of a cohesive crack model by Kalman filter, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.25-26, pp.2947-2871, 2002.
DOI : 10.1016/S0045-7825(02)00223-2

M. Bonnet and A. Frangi, Analyse des solides déformables par la méthode des 34éléments 34éléments finis, Les Editions de l'Ecole Polytechnique, 2006.

M. J. Van-den-bosch, P. J. Schreurs, and M. G. Geers, An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion, Engineering Fracture Mechanics, vol.73, issue.9, pp.73-1220, 2006.
DOI : 10.1016/j.engfracmech.2005.12.006

I. Chasiotis and W. G. Knauss, A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy, Experimental Mechanics, vol.44, issue.1, pp.42-43, 2002.
DOI : 10.1007/BF02411051

I. Chasiotis, Special issue on nanoscale measurements in Mechanics, Exp. Mech, pp.47-48, 2007.

S. Cho and J. , Measurement of nanodisplacements and elastic properties of MEMS via the microscopic hole method, Sensors and Actuators A: Physical, vol.120, issue.1, pp.163-171, 2005.
DOI : 10.1016/j.sna.2004.11.028

T. F. Coleman and Y. Li, An Interior Trust Region Approach for Nonlinear Minimization Subject to Bounds, SIAM Journal on Optimization, vol.6, issue.2, pp.418-445, 1996.
DOI : 10.1137/0806023

A. Derewonko, J. Godzimirski, K. Kosiuczenko, T. Niezgoda, and A. Kiczko, Strength assessment of adhesive-bonded joints, Computational Materials Science, vol.43, issue.1, pp.43-44, 2008.
DOI : 10.1016/j.commatsci.2007.07.026

P. Forquin, L. Rota, Y. Charles, and F. Hild, A Method to Determine the Toughness Scatter of, Brittle Materials, Int. J. Fract, pp.125-126, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00002912

M. G. Geers, R. De-borst, and T. Peijs, Mixed numerical-experimental identification of non-local characteristics of random-fibre-reinforced composites, Composites Science and Technology, vol.59, issue.10, pp.59-1569, 1999.
DOI : 10.1016/S0266-3538(99)00017-2

V. K. Goyal, E. R. Johnson, and C. G. Davila, Irreversible constitutive law for modeling the delamination process using interfacial surface discontinuities, Composite Structures, vol.65, issue.3-4, pp.65-289, 2004.
DOI : 10.1016/j.compstruct.2003.11.005

F. Hild and S. Roux, Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties - a Review, Strain, vol.334, issue.Srie I, pp.69-80, 2006.
DOI : 10.1111/j.1475-1305.2006.00258.x
URL : https://hal.archives-ouvertes.fr/hal-00013816

J. L. Högberg, Mixed mode cohesive law, International Journal of Fracture, vol.1, issue.2, pp.549-559, 2006.
DOI : 10.1007/s10704-006-9014-9

J. L. Högberg, B. F. Sørensen, and U. Stigh, Constitutive behaviour of mixed mode loaded adhesive layer, International Journal of Solids and Structures, vol.44, issue.25-26, pp.8335-8354, 2006.
DOI : 10.1016/j.ijsolstr.2007.06.014

Y. Hua, A. D. Crocombea, M. A. Wahaba, and I. A. Ashcroft, Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive, International Journal of Adhesion and Adhesives, vol.28, issue.6, pp.302-313, 2008.
DOI : 10.1016/j.ijadhadh.2007.08.005

K. Leffler, K. S. Alfredsson, and U. Stigh, Shear behaviour of adhesive layers, International Journal of Solids and Structures, vol.44, issue.2, pp.530-545, 2007.
DOI : 10.1016/j.ijsolstr.2006.04.036

M. Maier, R. Bocciarelli, and . Fedele, Some innovative industrial prospects centered on inverse analyses, Materials and Structures. CISM Lecture Notes, pp.47-73, 2005.
DOI : 10.1007/3-211-38134-1_3

S. R. Mcneill, W. H. Peters, and M. A. Sutton, Estimation of stress intensity factor by digital image correlation, Engineering Fracture Mechanics, vol.28, issue.1, pp.28-29, 1987.
DOI : 10.1016/0013-7944(87)90124-X

P. Michaleris, D. A. Tortorelli, and C. A. Vidal, Tangent Operators and Design Sensitivity. Formulations for Transient Nonlinear Coupled Problems with Applications to Elasto-Plasticity, Int. J. Num. Meth. Eng, pp.37-2471, 1994.

N. Moës, J. Dolbow, and T. Belytschko, A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering, vol.46, issue.1, pp.46-47, 1999.
DOI : 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.3.CO;2-A

T. Pardoen, T. Ferracin, C. M. Landis, and F. Delannay, Constraint effects in adhesive joint fracture, Journal of the Mechanics and Physics of Solids, vol.53, issue.9, pp.1951-1983, 2005.
DOI : 10.1016/j.jmps.2005.04.009

J. Réthoré, F. Hild, and S. Roux, Shear-band capturing using a multiscale extended digital image correlation technique, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.49-52
DOI : 10.1016/j.cma.2007.06.019

J. Réthoré, F. Hild, and S. Roux, Extended digital image correlation with crack shape optimization, International Journal for Numerical Methods in Engineering, vol.47, issue.2, pp.248-272, 2008.
DOI : 10.1002/nme.2070

K. Salomonsson and T. Andersson, Modeling and parameter calibration of an adhesive layer at the meso level, Mechanics of Materials, vol.40, issue.1-2, pp.48-65, 2008.
DOI : 10.1016/j.mechmat.2007.06.004

J. P. Sargent, Durability studies for aerospace applications using peel and wedge tests, International Journal of Adhesion and Adhesives, vol.25, issue.3, pp.247-256, 2005.
DOI : 10.1016/j.ijadhadh.2004.07.005

C. Shet and N. Chandra, ????? Cohesive Zone Curves on the Fracture Response, Mechanics of Advanced Materials and Structures, vol.35, issue.3, pp.249-275, 2004.
DOI : 10.1016/0013-7944(95)00060-9

J. Sinke, Manufacturing of GLARE Parts and Structures, Appl. Compos. Mat, vol.10, p.293305, 2003.

. Schmauder, Experimental and numerical characterisation of in-plane deformation in two-phase materials, Comput. Mat. Sci, vol.21, issue.3, pp.261-275, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00111335

B. F. Sørensen, E. K. Gamstedt, R. C. Østergaard, and S. Goutianos, Micromechanical model of cross-over fibre bridging ??? Prediction of mixed mode bridging laws, Mechanics of Materials, vol.40, issue.4-5, pp.40-220, 2008.
DOI : 10.1016/j.mechmat.2007.07.007

C. Su, Y. J. Wei, and L. Anand, An elastic???plastic interface constitutive model: application to adhesive joints, International Journal of Plasticity, vol.20, issue.12, pp.2063-2081, 2004.
DOI : 10.1016/j.ijplas.2003.12.008

. Riddel, Local crack closure measurements: Development of a measurement system using computer vision and a far-field microscope, in: Advances in fatigue crack closure measurement and analysis: second volume, STP 1343, pp.145-156, 1999.

M. A. Sutton, S. R. Mcneill, J. D. Helm, and Y. J. Chao, Advances in Two-Dimensional and Three-Dimensional Computer Vision, pp.323-372, 2000.
DOI : 10.1007/3-540-48800-6_10

A. Tarantola, Inverse Problems Theory. Methods for Data Fitting and Model Parameter Estimation, 1987.

N. Valoroso and L. Champaney, A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies, Engineering Fracture Mechanics, vol.73, issue.18, pp.2774-2801, 2006.
DOI : 10.1016/j.engfracmech.2006.04.029
URL : https://hal.archives-ouvertes.fr/hal-00109715

A. Vlot, Glare, History of the Development of a New Aircraft Material, 2001.

X. P. Xu and A. Needleman, Void nucleation by inclusions debonding in a crystal matrix, Modelling Simul, Mater. Sci. Eng, vol.1, pp.111-132, 1993.

Q. D. Yang, M. D. Thouless, and S. M. Ward, Elastic???plastic mode-II fracture of adhesive joints, International Journal of Solids and Structures, vol.38, issue.18, pp.3251-3262, 2001.
DOI : 10.1016/S0020-7683(00)00221-3

F. Yoshida, M. Urabe, R. Hino, and V. V. Toropov, Inverse approach to identification of material parameters of cyclic elasto-plasticity for component layers of a bimetallic sheet, International Journal of Plasticity, vol.19, issue.12, pp.2149-2170, 2003.
DOI : 10.1016/S0749-6419(03)00063-9