P. W. Wheeler, J. Rodriguez, J. C. Clare, L. Empringham, and A. Weinstein, Matrix converters: a technology review, IEEE Transactions on Industrial Electronics, vol.49, issue.2, pp.276-288, 2002.
DOI : 10.1109/41.993260

P. W. Wheeler, J. C. Clare, M. Apap, L. Empringham, K. J. Bradley et al., A fully integrated 30 kW motor drive using matrix converter technology, 2005 European Conference on Power Electronics and Applications, pp.11-14, 2005.
DOI : 10.1109/EPE.2005.219268

M. Aten, G. Towers, C. Whitley, P. Wheeler, J. Clare et al., Reliability comparison of matrix and other converter topologies, IEEE Transactions on Aerospace and Electronic Systems, vol.42, issue.3, pp.867-875, 2006.
DOI : 10.1109/TAES.2006.248190

J. Itoh, I. Sato, A. Odaka, H. Ohguchi, H. Kodachi et al., A Novel Approach to Practical Matrix Converter Motor Drive System With Reverse Blocking IGBT, IEEE Transactions on Power Electronics, vol.20, issue.6, pp.1356-1363, 2005.
DOI : 10.1109/TPEL.2005.857548

D. Domes and W. Hofman, Sic jfet in contrast to high speed si igbt in matrix converter topology, " 2007. PESC 07, IEEE 38th Annual Power Electronics Specialists Conference, pp.54-60, 2007.

M. Hornkamp, M. Loddenkötter, M. Münzer, O. Simon, and M. Bruckmann, Economac the first all-in-one igbt module for matrix converters

K. Sun, D. Zhou, L. Huang, K. Matsuse, and K. Sasagawa, A Novel Commutation Method of Matrix Converter Fed Induction Motor Drive Using RB-IGBT, IEEE Transactions on Industry Applications, vol.43, issue.3, pp.777-786, 2007.
DOI : 10.1109/TIA.2007.895769

P. W. Wheeler, J. C. Clare, L. Empringham, M. Bland, and K. G. Kerris, Matrix converters, IEEE Industry Applications Magazine, vol.10, issue.1, pp.59-65, 2004.
DOI : 10.1109/MIA.2004.1256253

O. Simon, J. Mahlein, M. N. Muenzer, and M. Bruckmarm, Modern solutions for industrial matrix-converter applications, IEEE Transactions on Industrial Electronics, vol.49, issue.2, pp.401-406, 2002.
DOI : 10.1109/41.993273

J. L. Galvez, X. Jorda, M. Vellvehi, J. Millan, M. A. Jose-prieto et al., Intelligent bidirectional power switch module for matrix converter applications, 2007 European Conference on Power Electronics and Applications, pp.1-9, 2007.
DOI : 10.1109/EPE.2007.4417382

L. Empringham, L. De-lillo, P. W. Wheeler, and J. C. Clare, Matrix Converter Protection for More Electric Aircraft Applications, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, pp.2564-2568, 2006.
DOI : 10.1109/IECON.2006.347685

J. Mahlein and M. Braun, A matrix converter without diode clamped over-voltage protection, Proceedings IPEMC 2000. Third International Power Electronics and Motion Control Conference (IEEE Cat. No.00EX435), pp.817-822, 2000.
DOI : 10.1109/IPEMC.2000.884609

J. Mahlein, M. Bruckmann, and M. Braun, Passive protection strategy for a drive system with a matrix converter and an induction machine, IEEE Transactions on Industrial Electronics, vol.49, issue.2, pp.297-303, 2002.
DOI : 10.1109/41.993262

A. Schuster, A matrix converter without reactive clamp elements for an induction motor drive system, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196), pp.714-720, 1998.
DOI : 10.1109/PESC.1998.701977

A. Alesina and M. G. Venturini, Analysis and design of optimum-amplitude nine-switch direct AC-AC converters, IEEE Transactions on Power Electronics, vol.4, issue.1, pp.101-112, 1989.
DOI : 10.1109/63.21879

D. Casadei, G. Serra, A. Tani, and L. Zarri, Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch state, IEEE Transactions on Industrial Electronics, vol.49, issue.2, pp.370-381, 2002.
DOI : 10.1109/41.993270

L. Zhang, C. Watthanasarn, and W. Shepherd, Analysis and comparison of control techniques for AC???AC matrix converters, IEE Proceedings- Electric Power Applications, pp.284-294, 1998.
DOI : 10.1049/ip-epa:19981937

D. Casadei, G. Serra, and A. Tani, The use of matrix converters in direct torque control of induction machines, IEEE Transactions on Industrial Electronics, vol.48, issue.6, pp.1057-1064, 2001.
DOI : 10.1109/41.969384

C. Ortega, A. Arias, J. Ballcells, C. Caruana, C. Spiteri et al., The Use of Small Voltage Vectors of Matrix Converters in Direct Torque Control of Induction Machines, 12th International Power Electronics and Motion Control Conference, Portoroz, pp.314-319, 2006.

A. Accioly, F. Bradaschia, M. Cavalcanti, F. Neves, and V. Lima, Generalized modulation strategy for matrix converters -part I, " 2007. PESC 07, IEEE 38th Annual Power Electronics Specialists Conference, pp.646-652, 2007.
DOI : 10.1109/pesc.2007.4342063

F. Bradaschia, M. Cavalcanti, F. Neves, V. Lima, and A. Accioly, Generalized modulation strategy for matrix converters -part II, " 2007. PESC 07, IEEE 38th Annual Power Electronics Specialists Conference, pp.665-671, 2007.

P. Cortes, J. Rodriguez, R. Vargas, and U. Ammann, Cost Functionbased Predictive Control for Power Converters, IEEE Industrial Electronics, IECON 2006 -32nd Annual Conference on, pp.2268-2273, 2006.

J. Rodriguez, J. Pontt, C. A. Silva, P. Correa, P. Lezana et al., Predictive current control of a voltage source inverter, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551), pp.495-503, 2007.
DOI : 10.1109/PESC.2004.1355460

X. Lin-shi, F. Morel, A. M. Llor, B. Allard, and J. Rétif, Implementation of Hybrid Control for Motor Drives, IEEE Transactions on Industrial Electronics, vol.54, issue.4, pp.1946-1952, 2007.
DOI : 10.1109/TIE.2007.898303
URL : https://hal.archives-ouvertes.fr/hal-00179424

M. Pacas and J. Weber, Predictive Direct Torque Control for the PM Synchronous Machine, IEEE Transactions on Industrial Electronics, vol.52, issue.5, pp.1350-1356, 2005.
DOI : 10.1109/TIE.2005.855662

E. Monmasson and M. N. Cirstea, FPGA Design Methodology for Industrial Control Systems—A Review, IEEE Transactions on Industrial Electronics, vol.54, issue.4, pp.1824-1842, 2007.
DOI : 10.1109/TIE.2007.898281